2019 Can-am Spyder RT
Problems, recalls and owner-reported issues
Service brakes is the leading concern among 6 owner complaints filed for this model year. This is the 5th highest complaint count among 10 Spyder RT model years with reports.
What owners report most often
Recalls and investigations
Power train, manual transmission, internal, shaft, outputOct 1, 2024
Bombardier Recreational Products (BRP) is recalling certain 2017-2019 Can-Am Spyder F3 and RT motorcycles. The engine output shaft may fatigue and break, resulting in a loss of drive power.
A loss of drive power increases the risk of a crash.
The output shaft will be replaced based on the mileage of the vehicles. Owner notification letters were mailed February 5, 2025. Owners may contact BRP customer service at 1-888-272-9222.
Campaign 24V728000 on NHTSA.gov
Power train, manual transmissionMay 18, 2022
Bombardier Recreational Products, Inc. (BRP) is recalling certain 2015-2019 Can-Am Spyder F3 and RT motorcycles. The front sprocket may be defective and prematurely wear, resulting in a loss of drive power.
A loss of drive power increases the risk of a crash.
Dealers will perform an interim repair until parts become available. Once parts are available, the front sprocket will be replaced, free of charge. Owner notification letters were mailed May 26, 2022. Owners may contact BRP customer service at 1-888-272-9222.
Campaign 22V352000 on NHTSA.gov
Representative owner complaints: service brakes
3 reports, newest first. Show all
Service brakes, Dec 26, 2022
Multiple failures of electronic parking brake release in which pressing release button results in the parking brake light flashing repeatedly (an error indicator) and parking brake does not release. Sometimes works again after turning cycle off and back on but this is second time that has not worked and I have had to crawl under with a wrench and manually remove the cable from the holder to drive to dealer. Once released that way, the button worked again for the dealer and they insisted they couldn’t replicate, wouldn’t replace switch or servo motor despite error fault codes. Suggested slightly low battery voltage might be to blame but I use a trickle charger. Replaced battery anyway. Happened again less than 2 weeks later, in a parking lot away from home. Dangerous because you cannot move cycle without undoing the parking brake cable and then you don’t have a parking brake, which it needs because it is an automatic transmission and will roll even if in gear if the engine isn’t running. I have seen numerous reports of this problem on Can-Am Spyder message boards. Either switch is faulty or servo motor is faulty. I can’t MOVE the bike to get it home or to the dealer without taking action that temporarily fixes the problem but they won’t fix it unless it is doing it for them. Despite numerous reports of this problem. I feel there needs to be a recall of 2018 and up Spyder RT Limited models to address this issue across all owners.
Service brakes, Aug 8, 2020
EMERGENCY BRAKE SOMETIMES DOES NOT RELEASE AND YOU HAVE TO DISASSEMBLE IT AT THE REAR HUB TO RELEASE IT.THIS HAPPENS WHEN THE VEHICLE IS STOPPED. THIS PROBLEM HAS HAPPENED SEVERAL TIMES TO ME, I KNOW OF SEVERAL OTHER PEOPLE ALSO, DIFFERENT MODELS AND YEARS
Electrical system, Service brakes, Jul 11, 2020
THE ELECTRONIC PARKING BRAKE MALFUNCTIONS AND FAILED TO EITHER ENGAGE OR DISENGAGE. FAILURE TO ENGAGE PREVENTS THE VEHICLE FROM ROLLING AFTER STARTING AND IN GEAR. FAILURE TO ENGAGE ALLOWS THE VEHICLE TO ROLL AFTER STOPPING, TURNING THE ENGINE OFF, AND RELEASING THE MANUAL FOOT BRAKE. IN ORDER TO STABILIZE THE VEHICLE FROM MOVING IF THE EBRAKE WILL NOT ENGAGE, THE RIDER MUST RELEASE THE MANUAL FOOT BRAKE, WHILE ATTEMPTING TO PREVENT THE VEHICLE FROM ROLLING, AND PLACE A CHOCK UNDER TIRE(S). IN ORDER TO PREVENT THE RIDER FROM BEING STRANDED IF THE EBRAKE FAILS TO DISENGAGE, THE RIDER MUST STABILIZE THE VEHICLE FIRST, MANUALLY REMOVE THE REAR BRAKE SPRING, AND LOOSEN THE BRAKE CABLE NUTS TO RELEASE BRAKE CABLE TENSION. THIS REQUIRES A SPRING TOOL AND TWO 12MM WRENCHES. WHILE THIS WILL ALLOW THE RIDER TO NOT BE STRANDED, IT CREATES A HAZARD WHEN THE RIDER ARRIVES AT THEIR DESTINATION AND MUST PARK THE VEHICLE.