2011 Chevrolet Malibu
Problems, recalls and owner-reported issues
Electrical system is the leading concern among 978 owner complaints filed for this model year. This is the 8th highest complaint count among 26 Malibu model years with reports.
Of the 2011 reports, 40 involved a crash and 17 involved a fire. 41 people were injured.
What owners report most often
Recalls and investigations
Air bags, frontal, driver side, inflator moduleJan 16, 2019
General Motors LLC (GM) is recalling certain 2010-2011 Chevrolet Malibu vehicles. In the event of a crash necessitating deployment of the driver frontal air bag, the air bag inflator may explode due to being overpressurized.
If the inflator explodes, sharp metal fragments may strike the driver or other occupants resulting in serious injury or death.
GM has notified owners, and dealers will replace the front driver air bag module, free of charge. The recall began February 25, 2019. Owners may contact GM customer service at 1-800-522-9559. GM's number for this recall is N182206630.
Campaign 19V019000 on NHTSA.gov
Seat beltsMay 8, 2015
General Motors LLC (GM) is recalling certain model year 2011-2012 Chevrolet Malibu vehicles manufactured April 8, 2010, to October 11, 2012. In the affected vehicles, the flexible steel cables that connect the seat belts to the vehicle at the outside of the driver seat and the front passenger seat may be bent from being sat on while entering the vehicle. This repeated bending may result in the cable breaking.
If the cable breaks, the seat occupant may not be properly restrained in the event of a crash, increasing their risk of injury.
GM will notify owners, and dealers will replace the outboard lap anchor mounting bracket and inspect the flexible steel cable, replacing it as necessary, free of charge. The recall began on November 16, 2015. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 15031.
Campaign 15V269000 on NHTSA.gov
SteeringJul 21, 2014
Dorman Products, Inc. (Dorman) is recalling certain replacement intermediate steering shafts sold under the Dorman, OE Solutions, and Solutions brand names, part numbers 425-167, 2425167, and 7-3074, for installation on 2004-2012 Chevrolet Malibu, 2005-2010 Pontiac G6, and 2007-2009 Saturn Aura vehicles. The affected steering shafts may have a yoke that inadequately supports the u-joint bearing resulting in a premature failure.
A joint bearing that fails prematurely may cause separation of the u-joint resulting in a complete loss of steering control, increasing the risk of a crash.
Dorman will notify owners, and dealers will refund the purchase price or replace the steering shafts, free of charge. The recall began in September 2014. Owners may contact Dorman customer service at 1-800-523-2492.
Campaign 14E044000 on NHTSA.gov
Electrical system, wiringMay 14, 2014
General Motors LLC (GM) is recalling certain model year 2004-2012 Chevrolet Malibu vehicles manufactured May 16, 2003, through October 11, 2012, 2004-2007 Malibu Maxx vehicles manufactured June 25, 2003, through April 5, 2007, 2005-2010 Pontiac G6 vehicles manufactured May 26, 2004, through January 4, 2010, and 2007-2010 Saturn Aura vehicles manufactured April 24, 2006, through May 26, 2009. In the affected vehicles, increased resistance in the Body Control Module (BCM) connection may result in voltage fluctuations in the Brake Apply Sensor (BAS) circuit. These fluctuations can cause one or more of these conditions: the brake lights to illuminate without the brake pedal being pushed; the brake lights to not illuminate when the pedal is pushed; difficulty disengaging the cruise control; moving the gear shifter out of the 'PARK' position without pushing the brake; and disablement of crash avoidance features such as traction control, electronic stability control, and panic braking assist features.
Any of the above failure conditions increases the risk of a crash.
GM will notify owners, and dealers will attach the wiring harness to the BCM with a spacer, apply dielectric lubricant to both the BCM and harness connector and the BAS and harness connector, and will relearn the brake pedal home position, free of charge. The manufacturer distributed an Interim letter to customers on July 14, 2014. The recall began on August 18, 2014. Owners may contact General Motors customer service at 1-800-222-1020 (Chevrolet), 1-800-762-2737 (Pontiac), 1-800-553-6000 (Saturn). GM's number for this recall is 13036.
Campaign 14V252000 on NHTSA.gov
Representative owner complaints
978 reports, newest first.
Engine and engine cooling, Power train, Feb 10, 2011
I WAS ACCELERATING FROM THE ENTRY LANE OF A MOSTLY EMPTY (THANKFULLY) RURALHIGHWAY WHEN SUDDENLY A WARNING MESSAGE "SERVICE TRACTION" ENGINE POWER REDUCED" SERVICE ESC APPEARED ON THE DASH MONITOR.. I LOST POWER AND COULD NOT GET ABOVE 45 MPH. THE TRANSMISSION APPEARED TO BE LOCKED INTO A GEAR LEVEL. I CONTACTED CHEY AND THEY TOLD ME IT IS A SAFETY FEATURE. HERE'S THE PROBLEM, IF I HAD BEEN DOING A HIGH SPEED MERGE ON A MAJOR HIGHWAY THE POWER LOSS COULD HAVE CAUSED AN ACCIDENT NOT TO MENTION GETTING ME KILLED. I THINK THE FEATURE IS ENGINEERED INTO THE SOFTWARE THAT CONTROLS THE ENGINE/TRANSMISSION. A DETECTED FAULT TRIGGERS THE ACTION. INCIDENTALLY, THERE WAS NO PRIOR NOTICE, WARNING LIGHTS,ETC. THAT WOULD HAVE INDICATED A PROBLEM. THE LACK OF NOTICE EXACERBATES THE DANGER.
Electronic stability control (ESC), Traction control system, Jan 26, 2011
I PURCHASED A 2011 MALIBU FROM CHAMPION CHEVROLET IN AUSTIN, TX IN NOVEMBER 2010. THE CAR WAS DELIVERED TO ME WITH A KNOWN DEFECTIVE EBCM (ELECTRONIC BRAKE CONTROL MODULE). THEY HAD THE PART ON ORDER AND DIDN'T TELL ME. I FOUND OUT A COUPLE OF DAYS LATER WHEN I HAD A TRACTION CONTROL FAILURE INDICATION AND WAS INFORMED THAT IT WOULD CONTINUE TO FAIL UNTIL THE MODULE WAS REPLACED. THE MODULE WAS REPLACED AND STILL HAD A TRACTION CONTROL/ABS FAILURE. LATER I HAD TO HAVE THE CAR TOWED TO THE DEALER. THE CONNECTOR ON THE EBCM HAD A PUSHED PIN FROM THE MODULE REPLACEMENT. THE CAR WAS KEPT THERE A WEEK LOOKING FOR THE TRACTION CONTROL/ABS FAILURE AND A HYDRAULIC PRESSURE CONTROL MODULE WAS REPLACED. THIS LEFT THE BRAKES FEELING SOFT/MUSHY..MORE TRAVEL. TRIED TO GET A REPLACEMENT VEHICLE BUT DEALER WOULDN'T HELP ME UNLESS I WAS WILLING TO TAKE A $6000 LOST ON THE MONTH OLD MALIBU. COMPLAINED TO GM BUT ALL THEY SAID WAS THAT THE DEALER FIXED THE CAR. OFFERED SOME OIL CHANGES. IN JANUARY DECIDED TO GO AHEAD AND TAKE HIT ON THIS MALIBU AND BECAUSE OF CURRENT INCENTIVES TRADED IT FOR ANOTHER MALIBU. *TR
Engine and engine cooling, Oct 15, 2010
THE PROBLEM I AM EXPERIENCING WITH MY 2011 CHEVROLET MALIBU LTZ IS A METALLIC RATTLE COMING FROM THE REAR END OF THE VEHICLE WHEN DRIVING OVER UNEVEN ROADS. I PURCHASED THE VEHICLE NEW ON AUGUST 24, 2010. THE VERY NEXT DAY AFTER PURCHASING THE VEHICLE I BEGAN HAVING TROUBLE WITH THE METALLIC RATTLE. I TOOK MY VEHICLE BACK TO THE DEALER FOR REPAIRS ON AUGUST 30, AUGUST 31, SEPTEMBER 17, SEPTEMBER 30 (2 DAYS) AND OCTOBER 7, 2010 BUT, TO DATE, THE DEALERSHIP HAS BEEN UNABLE TO CORRECT THE PROBLEM. AT THIS POINT IN TIME THE SERVICE ADVISOR TOLD ME ? I HAVE NO FURTHER ACTION PLAN? AND THE MECHANIC THAT WORKED ON MY VEHICLE TOLD ME ? THE NOISE MAY BE THE NEW NORMAL FOR CHEVROLET?. THIS SAME NONCONFORMIST SUBSTANTIALLY IMPAIRS THE USE, VALUE AND SAFETY OF MY NEW VEHICLE. I HAVE ASKED THAT THE VEHICLE BE REPLACED PURSUANT TO THE LEMON LAW OF OHIO. I CONTACTED THE CHEVROLET CUSTOMER ASSISTANCE CENTER AND WAS TOLD THAT THE VEHICLE WAS REPAIRED BY THE DEALERSHIP, WHICH THE DEALERSHIP STATED WAS UNTRUE AND WAS NEVER COMMUNICATED TO THEM. BOTH THE SERVICE ADVISOR AND MECHANIC AT THE DEALERSHIP HAVE HEARD THE METALLIC RATTLE AND SAID IT IS UP TO CHEVROLET MOTORS DIVISION TO OFFER OTHER POSSIBLE SOLUTIONS. I THINK I HAVE BEEN PATIENT LONG ENOUGH AND SINCE THE SOURCE OF THE NOISE HAS NOT BEEN DETERMINED THE VEHICLE SHOULD BE REPLACED. *TR