2015 Harley-Davidson XG750

Problems, recalls and owner-reported issues

Fuel/propulsion system is the leading concern among 79 owner complaints filed for this model year. This is the highest complaint count among 4 XG750 model years with reports.

Complaints by model year
  1. 79

Of the 2015 reports, 8 involved a crash. 4 people were injured.

Primary concernFuel/propulsion system58 reports · 73% of complaints
Owner complaints79Filed with NHTSA
Recall relationship3 safety recallsNHTSA campaign records

What owners report most often

  1. Fuel/propulsion system58
  2. Engine13
  3. Vehicle speed control12
  4. Other or unspecified8
  5. Power train7
  6. Service brakes6
  7. Electrical system3
  8. Steering2

Recalls and investigations

  1. Fuel system, gasoline, delivery, fuel pumpJul 29, 2015

    Harley-Davidson Motor Company (Harley-Davidson) is recalling certain model year 2015 XG500 motorcycles manufactured January 20, 2014, to July 7, 2015, and XG750 motorcycles manufactured May 12, 2014, to July 7, 2015. The fuel pump modules on these motorcycles have a poor seal at the fuel pump inlet.

    If there is a poor seal at the fuel pump inlet it can cause interruption to the fuel supply, possibly causing a brief hesitation with the abrupt restoration of power. This abrupt restoration of power can lead to loss of control, increasing the risk of a crash.

    Harley-Davidson will notify owners, and dealers will install a new fuel pump assembly, free of charge. The recall began on August 21, 2015. Owners may contact Harley-Davidson customer service at 1-414-343-4056. Harley-Davidson's number for this recall is 0167.

    Campaign 15V474000 on NHTSA.gov

  2. Exterior lightingApr 13, 2015

    Harley-Davidson Motor Company (Harley-Davidson) is recalling certain model year 2015 XG500 motorcycles manufactured January 28, 2014, to March 9, 2015, and 2015 XG750 motorcycles manufactured May 12, 2014, to March 9, 2015. The affected motorcycles may have been manufactured without a rear reflector assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

    If the motorcycle is missing the rear reflector it can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.

    Harley-Davidson will notify owners, and dealers will install a rear reflector assembly, free of charge. The recall began on April 29, 2015. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson's number for this recall is 0620.

    Campaign 15V217000 on NHTSA.gov

  3. Fuel system, gasoline, storage, tank assembly, filler pipe and capSep 5, 2014

    Harley-Davidson Motor Company (Harley-Davidson) is recalling certain model year 2015 XG500 and XG750 motorcycles manufactured June 11, 2014, to August 14, 2014. The fuel tank filler neck may be insufficiently flat, preventing the fuel cap from sealing properly.

    If the fuel cap doesn't properly seal, fuel may leak, increasing the risk of a vehicle fire.

    Harley-Davidson will notify owners, and dealers will inspect the motorcycle and test to see if fuel can leak from under the fuel cap. Any motorcycle that leaks fuel from under the fuel cap will have its gas tanked replaced, free of charge. The recall began in late September 2014. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson's number for this recall is 0161.

    Campaign 14V536000 on NHTSA.gov

Representative owner complaints: steering

2 reports, newest first. Show all

  1. Steering, Wheels, Aug 20, 2018

    WHILE RIDING AT LOW SPEED ON CITY STREETS, THE STEERING FELT UNUSUALLY TIGHT. UPON ARRIVING HOME, I LIFTED THE FRONT WHEEL OFF OF THE GROUND AND CONFIRMED THAT SOMETHING WAS BINDING IN THE STEERING HEAD, CAUSING INCREASED STEERING EFFORT AND A "NOTCHY" FEELING. I DEEMED THE MOTORCYCLE UNSAFE TO RIDE. SEVERAL DAYS LATER, I DISASSEMBLED THE STEERING HEAD ASSEMBLY TO INSPECT THE BEARINGS AND FOUND EVIDENCE OF WATER INTRUSION. I FOUND THE UPPER BEARING SLIGHTLY RUSTED AND THE LOWER BEARING SUBSTANTIALLY RUSTED, AND DETERMINED THE RUSTED BEARINGS TO BE THE CAUSE OF THE BINDING. WHILE DISASSEMBLING THE MOTORCYCLE, I DISCOVERED THAT ONE FRONT WHEEL BEARING FELT ROUGH. UPON REMOVING AND DISASSEMBLING THE DEFECTIVE WHEEL BEARING, I FOUND IT TO BE RUSTED INTERNALLY. THIS MOTORCYCLE IS THREE YEARS OLD AND HAS ONLY 2,356 MILES ON THE ODOMETER, AND IT REQUIRES NEW STEERING HEAD BEARINGS AND FRONT WHEEL BEARINGS.

  2. Steering, Vehicle speed control, Jul 12, 2015

    MOTORCYCLE LAGGED AND LEAPED ACCELERATING FROM A STOP WHILE LOW ON FUEL - THIS PROBLEM WAS SAID TO BE REMEDIED AFTER BRINGING IT UP WITH A DEALER AND THEY INSTALLED A NEW FUEL PUMP... HOWEVER THE PROBLEM SEEMS TO HAVE RETURNED. ACCELERATION SEEMS TO STUTTER THEN RETURN AT FULL FORCE IN A SPLIT SECOND, CAUSING LOSS OF TRACTION AND STEERING. CANNOT STRESS ENOUGH HOW DANGEROUS THIS IS DRIVING IN AN URBAN ENVIRONMENT.