2008 Hyundai Santa FE
Problems, recalls and owner-reported issues
Fuel/propulsion system is the leading concern among 541 owner complaints filed for this model year. This is the 4th highest complaint count among 25 Santa FE model years with reports.
Of the 2008 reports, 17 involved a crash and 7 involved a fire. 12 people were injured.
What owners report most often
Recalls and investigations
Exterior lighting, brake lights, switchApr 1, 2013
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.
Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
Campaign 13V113000 on NHTSA.gov
Air bags, frontal, sensor/control module-inactiveJul 25, 2012
Hyundai is recalling certain model year 2007 through 2009 Santa Fe vehicles manufactured from April 19, 2006, through July 7, 2008. The occupant classification system (OCS) may need recalibration to accurately detect small statured adults.
Improper classification or detection may cause the front passenger airbag not to deploy in the event of a crash, increasing the risk of injury to the front passenger.
Hyundai will notify owners, and dealers will update the classification software free of charge. The safety recall began on September 7, 2012. Owners may contact Hyundai at 1-800-633-5151.
Campaign 12V354000 on NHTSA.gov
Air bags, frontalSep 9, 2011
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2007-2008 HYUNDAI VERACRUZ VEHICLES MANUFACTURED FROM DECEMBER 26, 2006, THROUGH MARCH 21, 2008, AND MODEL YEAR 2007-2008 HYUNDAI SANTA FE VEHICLES MANUFACTURED FROM APRIL 19, 2006 THROUGH MARCH 20, 2008. THE CLOCK SPRING CONTACT ASSEMBLY FOR THE DRIVER'S AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) MAY BECOME DAMAGED THROUGH USAGE OVER TIME. THE DRIVER'S AIR BAG ELECTRICAL CIRCUIT WILL EXPERIENCE A HIGH RESISTANCE CONDITION, POTENTIALLY CAUSING THE DRIVER'S AIR BAG TO NOT DEPLOY.
IF THE CLOCK SPRING DEVELOPS HIGH RESISTANCE, IN THE EVENT OF A CRASH, THE DRIVERS AIR BAG WILL NOT DEPLOY AND WILL NOT BE ABLE TO PROPERLY PROTECT THE DRIVER, INCREASING THE RISK OF INJURIES.
HYUNDAI DEALERS WILL REPLACE THE VEHICLE'S DRIVER'S AIR BAG CLOCK SPRING CONTACT ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL BEGAN IN NOVEMBER 2011. OWNERS MAY CONTACT HYUNDAI CUSTOMER CONNECT CENTER AT 1-800-633-5151.
Campaign 11V472000 on NHTSA.gov
Trailer hitchesSep 3, 2008
HYUNDAI IS RECALLING 3,387 TRAILER HITCH WIRING HARNESSES EITHER INCLUDED WITH A TRAILER HITCH OR SOLD AS A SERVICE PART MANUFACTURED BY THULE TOWING SYSTEMS AND DISTRIBUTED BY HYUNDAI FOR INSTALLATION ON MY 2007-2008 SANTA FE AND VERACRUZ VEHICLES. THE ACCESSORY TRAILER HITCH WIRING HARNESS CONVERTER MODULE IS MOUNTED TO THE TOP SURFACE OF THE REAR BUMPER REINFORCEMENT. SOME CIRCUIT BOARD COMPONENTS MAY NOT HAVE BEEN THOROUGHLY SEALED TO PREVENT MOISTURE CONTACT. THE MOISTURE MAY RESULT IN CIRCUIT BOARD CORROSION POSSIBLY CAUSING A SHORT CIRCUIT.
A SHORT CIRCUIT CAN CAUSE OVERHEATING AND DAMAGE TO THE CONVERTER MODULE, POSSIBLY RESULTING IN A FIRE.
THIS RECALL SUPERSEDES A PREVIOUS RECALL CONDUCTED BY HYUNDAI AFFECTING THE SAME TRAILER HITCH WIRING COMPONENTS CONCERNING HIGH CURRENT LEAKAGE OR A SHORT CIRCUIT OF CAPACITOR C1. (PLEASE SEE 08E016). OWNERS WHO HAVE ALREADY HAD THEIR TRAILER HITCH REPAIRED UNDER THE INITIAL CAMPAIGN WILL RECEIVE A SECOND NOTICE FROM HYUNDAI TO HAVE THE NEWLY DESIGNED HARNESS INSTALLED. HYUNDAI WILL NOTIFY ALL OWNERS AND WILL REPAIR THE AFFECTED HARNESSES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 13, 2008. OWNERS MAY CONTACT HYUNDAI CUSTOMER ASSISTANT CENTER AT 1-800-633-5151.
Campaign 08E055000 on NHTSA.gov
Equipment, other, labelsJun 19, 2008
HYUNDAI IS RECALLING 88,943 MY 2007-2008 HYUNDAI SANTA FE VEHICLES EQUIPPED WITH P235/60R18 TIRES. THESE VEHICLES FAIL TO COMPLY WITH THE LABELING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110 "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES." THE BLACK CERTIFICATION LABEL AFFIXED TO THE DRIVER'S SIDE CENTER PILLAR, INCORRECTLY LISTS THE GROSS AXLE WEIGHT RATINGS (GAWR).
OVERLOADING YOUR VEHICLE MAY ADVERSELY AFFECT HANDLING AND BRAKING AND MAY CAUSE TIRE DAMAGE, RESULTING IN TIRE FAILURE AND A CRASH WITHOUT WARNING.
HYUNDAI WILL MAIL CORRECTED CERTIFICATION LABELS ALONG WITH THE INSTRUCTIONS TO THE AFFECTED OWNERS. THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 5, 2008. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
Campaign 08V272000 on NHTSA.gov
Trailer hitchesFeb 7, 2008
THIS RECALL HAS BEEN SUPERCEDED BY RECALL 08E-055. HYUNDAI IS RECALLING 3,387 TRAILER HITCH WIRING HARNESSES EITHER INCLUDED WITH A TRAILER HITCH OR SOLD AS A SERVICE PART MANUFACTURED BY THULE TOWING SYSTEMS AND DISTRIBUTED BY HYUNDAI FOR INSTALLATION ON MY 2007-2008 SANTA FE AND VERACRUZ VEHICLES. THE ACCESSORY TRAILER HITCH WIRING HARNESS CONVERTER MODULE IS MOUNTED TO THE TOP SURFACE OF THE REAR BUMPER REINFORCEMENT. HIGH CURRENT LEAKAGE OR A SHORT CIRCUIT OF CAPACITOR C1 COULD CAUSE HEAT RELATED DAMAGE TO THE WIRING HARNESS CONVERTER MODULE.
EXCESSIVE HEAT MAY CAUSE DAMAGE TO THE REAR BUMPER AREA AND MAY POTENTIALLY RESULT IN A FIRE.
HYUNDAI WILL NOTIFY OWNERS AND WILL REPLACE THE TRAILER HITCH WIRING HARNESS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 31, 2008. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.
Campaign 08E016000 on NHTSA.gov
Representative owner complaints: vehicle speed control
52 reports, newest first. Show all
Vehicle speed control, Jan 16, 2010
I HAVE TWICE EXPERIENCED A DANGEROUS OCCURRENCE DURING ACCELERATION. I PRESS THE GAS PEDAL BUT WHEN I TAKE MY FOOT OFF TO DECELERATE, THE CAR CONTINUES TO GAIN SPEED AND BRAKING HAS NO EFFECT. IN EACH INSTANCE, THE ONLY WAY TO MAKE THE CAR SLOW DOWN OR STOP WAS TO PUT IT IN NEUTRAL AND FIND A SAFE PLACE TO ALLOW IT TO COAST UNTIL I COULD TURN THE ENGINE OFF. THE LAST OCCURRENCE I WAS GOING 75 MPH ON I-35, HAD TO SWERVE TO LEFT SHOULDER TO AVOID BEING SIDESWIPED. MY 5 YEAR OLD GRANDDAUGHTER WAS IN THE CAR WITH ME. I TOOK MY VEHICLE TO THE DEALERSHIP FOR REPAIR AND WAS TOLD BOTH TIMES THAT THE PEDAL MUST BE STICKING ON THE FLOOR MAT. AFTER THE SECOND EXPERIENCE, I LOOKED FOR SIMILAR STORIES ON THE INTERNET AND FOUND 5 RECENT POSTINGS OF THE SAME ISSUE HAPPENING TO OTHER PEOPLE. IF MORE THAN A COUPLE OF PEOPLE REPORT THE SAME ISSUE, SHOULDN'T HYUNDAI MAKE A DEDICATED EFFORT TO IDENTIFY AND CORRECT IT IMMEDIATELY OR RECALL THE VEHICLE ALTOGETHER? I DO NOT BELIEVE THE MAT IS CAUSING THE PROBLEM BECAUSE THE SECOND TIME IT OCCURRED I VISUALLY CHECKED THE MAT AND EVEN PULLED IT BACKWARDS WITH MY FEET WHILE TRYING TO FIND A WAY OUT OF TRAFFIC. IN ADDITION, IF THE PEDAL WAS STICKING ON THE MAT, WHY WOULD THE ONLY CORRECTIVE ACTION BE TO PLACE THE CAR IN NEUTRAL OR TO TURN THE ENGINE COMPLETELY OFF ? THEORETICALLY, WOULDN'T THE ACCELERATOR STILL BE "STUCK ON THE MAT" IN THIS INSTANCE? LAST AND MOST IMPORTANTLY, EVEN IF THE CLAIM OF THE MATS BEING THE PROBLEM IS ACCURATE, THESE MATS ARE THE SAME THAT CAME WITH THE VEHICLE WHEN PURCHASED. I ASSUME THEY ARE PRODUCED AND/OR APPROVED BY THE MANUFACTURER AS PART OF THE FINISHED PRODUCT AND, THEREFORE, HYUNDAI IS STILL THE LIABLE PARTY FOR ANY ACCIDENTS CAUSED BY THIS ISSUE. I HAVE REMOVED THE MATS ENTIRELY FROM MY CAR BUT I AM PETRIFIED TO DRIVE IT. DOES HYUNDAI REALLY WANT TO WAIT UNTIL A TRAGEDY OCCURS BEFORE CONSIDERING CORRECTIVE ACTION? *TR
Vehicle speed control, Oct 1, 2009
TL*THE CONTACT OWNS A 2008 HYUNDAI SANTA FE. WHILE DRIVING APPROXIMATELY 60 MPH ON NORMAL ROAD CONDITIONS AND APPLYING PRESSURE TO THE ACCELERATOR PEDAL, THE VEHICLE FAILED TO ACCELERATE. THE CONTACT WAS ABLE TO COAST WITH CAUTION INTO A PARKING LOT. THE VEHICLE WAS TOWED TO AN AUTHORIZED DEALER FOR DIAGNOSTIC TESTING. THE TECHNICIAN STATED THAT THE FAILURE WAS CONTRIBUTED TO THE THROTTLE SENSOR ASSEMBLY. THE VEHICLE WAS REPAIRED. THE CONTACT HAD CONCERNS OF THE SAFETY RISK INVOLVED. THE FAILURE AND CURRENT MILEAGES WERE 8,452.