2022 Jeep Grand Cherokee
Problems, recalls and owner-reported issues
Electrical system is the leading concern among 370 owner complaints filed for this model year. This is the 18th highest complaint count among 26 Grand Cherokee model years with reports.
Of the 2022 reports, 14 involved a crash. 7 people were injured.
What owners report most often
Recalls and investigations
Suspension, rear, springs, coil springsSep 1, 2026
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Jeep Grand Cherokee L, 2022-2023 Jeep Grand Cherokee, and Jeep Grand Cherokee 4XE vehicles. The rear coil springs may be incorrectly installed and detach from the vehicle while driving.
Rear coil springs that detach from the vehicle while driving increase the risk of a crash.
Dealers will replace the rear coil spring lower isolators, free of charge. Interim notification letters, notifying owners of the safety risk, are expected to be mailed September 29, 2026. Additional letters will be sent once the final remedy is available. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 89D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on September 9, 2026. This recall replaces NHTSA recall numbers 26V051 and 23V413. Vehicles already repaired under the previous recalls will need to have the new remedy completed.
Campaign 26V562000 on NHTSA.gov
Power train, automatic transmission, gear position indication (prndl)Jun 30, 2026
Chrysler (FCA US, LLC) is recalling certain 2022-2024 Jeep Grand Cherokee, 2023 Jeep Wagoneer, 2024 Jeep Grand Cherokee L, and Jeep Wagoneer L vehicles. A software error may cause the transmission gear selection indicator not to display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 102, "Transmission shift lever sequence, starter interlock, and transmission braking effect."
A missing gear selection indicator may lead to unintended vehicle movement or a vehicle rollaway, increasing the risk of a crash.
Dealers will update the shifter module software, free of charge. Owner notification letters were mailed August 20, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 30D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning July 9, 2026.
Campaign 26V413000 on NHTSA.gov
Air bags, air bag/restraint control module, softwareMay 21, 2026
Chrysler (FCA US, LLC) is recalling certain 2022-2026 Jeep Grand Cherokee and 2023-2025 Jeep Grand Cherokee L vehicles. A software error in the occupant restraint controller module may cause the delayed deployment of the side air bags during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 214, "Side Impact Protection."
Delayed air bag deployment during a crash increases the risk of injury.
Dealers will update the occupant restraint controller module software, free of charge. Some owner notification letters are expected to be mailed June 18, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 01D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov on May 28, 2026.
Campaign 26V328000 on NHTSA.gov
Suspension, rear, springs, coil springsJan 29, 2026
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Jeep Grand Cherokee L and 2022-2023 Jeep Grand Cherokee vehicles. The rear coil springs may be incorrectly installed and detach from the vehicle while driving.
Rear coil springs that detach from the vehicle while driving increase the risk of a crash.
Dealers will inspect and repair the rear coil spring assembly, as necessary, free of charge. Interim notification letters, notifying owners of the safety risk, were mailed February 12, 2026. Additional letters will be sent once the final remedy is available, anticipated in March 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 20D. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 30, 2026. This recall replaces NHTSA recall number 23V413. Vehicles already repaired under the previous recall will need to have the new remedy completed.
Campaign 26V051000 on NHTSA.gov
Electrical system, propulsion system, traction batteryPark outsideOct 30, 2025
Chrysler (FCA US, LLC) is recalling certain 2020-2025 Jeep Wrangler 4Xe and 2022-2026 Grand Cherokee 4Xe vehicles. The high voltage battery may fail internally and lead to a vehicle fire while parked or driving.
A vehicle fire can increase the risk of injury.
Owners are advised to park outside and away from structures and not to charge their vehicles until the remedy is completed. Dealers will update the high voltage battery software, and replace the high voltage battery, as necessary, free of charge. Some owner notification letters were mailed beginning December 17, 2025. The remaining owner notification letters will be mailed at a later date. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 68C. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning November 6, 2025. Vehicles that were previously recalled for the same issue under NHTSA Recalls 24V720 and 23V787 will need to have the new remedy performed.
Campaign 25V741000 on NHTSA.gov
Electrical system, propulsion systemSep 4, 2025
Chrysler (FCA US, LLC) is recalling certain 2022-2026 Jeep Grand Cherokee Plug-In Hybrid Electric (PHEV) vehicles. A software error within the hybrid control processor may result in a loss of drive power.
A loss of drive power increases the risk of a crash.
Dealers will update the hybrid control processer software, free of charge. Owner notification letters were mailed October 14, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 73C. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 11, 2025.
Campaign 25V576000 on NHTSA.gov
Equipment, electrical, infotainment, video (touch)screen/monitor/unitFeb 13, 2025
Chrysler (FCA US, LLC) is recalling certain 2022 Jeep Grand Cherokee and 2021-2022 Jeep Grand Cherokee L vehicles. The center stack upper display (DCSD) contains a transistor that may overheat and prevent the rearview camera image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
A rearview image that does not display reduces the driver's visibility, increasing the risk of a crash.
Dealers replaced the DCSD, free of charge. All affected vehicles have been repaired. Owner notification letters were mailed February 27, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 11C.
Campaign 25V083000 on NHTSA.gov
Air bags, side/windowNov 27, 2024
Chrysler (FCA US, LLC) is recalling certain 2022-2024 Jeep Grand Cherokee and 2021-2024 Jeep Grand Cherokee L vehicles. An improperly secured connector for the front seat side air bags (SAB) may prevent the air bags from deploying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 214, "Side Impact Protection."
An air bag that does not deploy during a crash increases the risk of injury.
Dealers secured the connector, free of charge. All affected vehicles have been remedied. Owner notification letters were mailed December 17, 2024. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is B3B.
Campaign 24V897000 on NHTSA.gov
Back over prevention, sensing system, cameraJun 13, 2024
Chrysler (FCA US, LLC) is recalling certain 2021-2022 Dodge Durango, 2021-2023 Chrysler Pacifica, Jeep Grand Cherokee L, 2022 Ram 1500, 2500, 3500, Chrysler Voyager, 2022-2023 Jeep Compass, Grand Cherokee, Wagoneer, Grand Wagoneer, and Ram Promaster vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash.
Dealers will update the radio software or the software will be OTA, "Over-The-Air," free of charge. Owner notification letters were mailed beginning July 9, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's numbers for this recall are 66B and 79B.
Campaign 24V436000 on NHTSA.gov
Back over prevention, sensing system, cameraApr 25, 2024
Chrysler (FCA US, LLC) is recalling certain 2022-2023 Jeep Grand Cherokee and 2023-2024 Jeep Grand Cherokee L vehicles. An improperly connected coaxial cable may prevent the rearview camera image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
A rearview camera image that does not display decreases the driver's visibility, increasing the risk of injury or crash.
Dealers will secure the coaxial cable connection, free of charge. All affected vehicles have been remedied. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 40B.
Campaign 24V289000 on NHTSA.gov
Suspension, front, control arm, upper ball jointFeb 22, 2024
Chrysler (FCA US, LLC) is recalling certain 2021-2023 Jeep Grand Cherokee L and 2022-2023 Jeep Grand Cherokee vehicles. The upper control arm ball joint and steering knuckle may separate and cause the wheel to fall outward, resulting in a loss of vehicle control.
A loss of vehicle control increases the risk of a crash.
Dealers will replace the upper control arm pinch bolts, free of charge. Owner notification letters were mailed April 2, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA's number for this recall is 10B.
Campaign 24V132000 on NHTSA.gov
Visibility, defroster/defogger/hvac systemFeb 15, 2024
Chrysler (FCA US, LLC) is recalling certain 2021-2024 Jeep Wrangler and 2022-2024 Jeep Grand Cherokee vehicles. A hybrid control processor (HCP) software error may cause the defrosting and defogging system to be inoperative. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 103, "Windshield Defrosting and Defogging Systems."
An inoperative windshield defrosting and defogging system may decrease the driver's visibility, increasing the risk of a crash.
Dealers will update the HCP software, free of charge. Owner notification letters were mailed February 29, 2024. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is 04B.
Campaign 24V111000 on NHTSA.gov
Back over prevention, display functionAug 14, 2023
Chrysler (FCA US, LLC) is recalling certain 2022-2023 Jeep Grand Cherokee, 2021-2023 Jeep Grand Cherokee L, and 2022-2024 Jeep Wagoneer and Grand Wagoneer vehicles. The Central Vision Park Assist module (CVPAM) software may prevent the rearview image from displaying when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
A rearview image that does not display while in reverse decreases the driver's visibility of the rear view, increasing the risk of injury or crash.
Dealers will update the Central Vision Park Assist Module software, free of charge. Owner notification letters were mailed August 31, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 56A.
Campaign 23V577000 on NHTSA.gov
Representative owner complaints: electrical system
166 reports, newest first. Show all
Electrical system, Engine, Sep 5, 2025
I leased a 2022 Jeep Grand Cherokee 4xe. The main failure involves the hybrid electrical system, which repeatedly malfunctions. The most serious issue is that the vehicle will suddenly stall while driving, without warning, leaving me and my children stranded in the middle of traffic. This creates an extreme safety risk, as it has happened in intersections and nearly caused accidents with other vehicles, including a semi-truck. The problem has been reproduced and confirmed multiple times by the dealership. Despite numerous service visits, no permanent fix has been provided. FCA/Stellantis representatives have acknowledged there is not yet a repair for this ongoing defect. The vehicle has also failed to charge on several occasions, displaying “Service Charging System” and “Service Hybrid Electrical System” warnings. I have documentation, work orders, and photos/videos of these repeated issues. The dealer and manufacturer have been unable to repair the vehicle within a reasonable time. Warning messages such as “Service Hybrid Electrical System” first appeared within months of leasing the vehicle, and they continue to reappear unpredictably. Because of these defects, my safety and the safety of my three young children have been placed at significant risk every time the vehicle stalls or refuses to charge.
Electrical system, Vehicle speed control, Forward collision avoidance, Aug 22, 2025
On April 12th my husband and I were driving our Jeep after it had a recall and update to fix the recall of a battery issue on all 4xE models. We were doing 45 mph down the road and it threw an error code that said “Service Hybrid Electric Vehicle System”, “Service Emergency Braking System” the Jeep then shut off and said for us to push the brake and press start for us to turn the car on in the middle of the road. We were able to safely get off the road, when we came to a stop the car put itself into park automatically. We had to start it a couple of times to make sure it was ok to turn around and drive home. It was then towed to the dealership. They told us they could see the issue logged in the system but they could not replicate the same issue after driving it. They told us that we had to come and pick up the Jeep and I told them how unsafe that made me feel for us and everyone on the road. They told us there’s nothing they could do for us. We got the car back and another issue arose where are Passive Entry Switch became corroded and our car kept unlocking itself throughout the night. The day we got it back from them we were driving it and we got the same “Service Hybrid Electric Vehicle System” again. So I brought our Jeep back again and they told me in the service department they’ve been working with the engineers at Jeep and they are waiting for an update to fix it and it’s one of four in the area with this issue and Jeep is fully aware of the severity of the issue. They also told me they would be holding on to our car until it’s fixed. I was called by the head of the service department at that dealership and was told they need their loaner car back and they got word they’ll maybe have a fix for our car in November. They knowingly gave us our completely unsafe Jeep back and told us to try for Lemon Law - with all parties knowing the severity of the security and lives put at risk on the road. We have gotten this error code many times and are told there is no fix
Electrical system, Aug 22, 2025
I’ve got a 2022 Jeep Grand Cherokee 4xe with about 55,000 miles on it. Earlier this year (2025) I started getting a dashboard warning - a red wrench icon with a lightning bolt with a message “service hybrid electric vehicle system”. The message would appear for about five seconds then disappear. Nothing showed up in the notices under Vehicle … System and there were no problems operating the vehicle. It is a plug-in hybrid. I continued to charge the vehicle at my home 40-amp charger. The first few times it happened I ignored it. After a third message I started worrying and contacted the dealership. \\\\n\\\\nI brought the Vehicle in for service on Tuesday July 22. The dealer diagnosed a digital crash code B273C-00. They recommended a repair as described in TSB is 08-116-25 REV. A for the Wrangler 4xe, saying the Wrangler and Grand Cherokee have identical systems, however, the repair is covered under warranty only for the Wrangler. I approved the repair and paid about $600. I've asked Jeep (via the Jeep Cares service, case 93915325) to consider covering the repair and refunding me. \\\\n\\\\nSince getting the car back 2 weeks ago I've put on about 1,200 miles and the message has not recurred. I won't be persuaded the problem is fixed until after about 6 months of driving. \\\\n\\\\nOther owners who have had digital crash messages on the Jeep Cherokee have experienced loss of power, systems failure and similar problems and advised me to report my incident, so I have in case it will help improve the safety of the vehicle.
Electrical system, Other or unspecified, Aug 16, 2025
The entire Jeep failed. Every light, warning, service, etc came up when cranking, and then it went dead. Now, it will not crank at all. Additionally, the trunk will not open and no power pops up on dashboard or display. This is put my family at risk due to the vehicle being parked next to my home with a possible shortage. No one has confirmed or checked, due to it being a Saturday. No warning was given prior.
Electrical system, Other or unspecified, Aug 14, 2025
Check engine light came on. Took my jeep in and was told it was a software issue and not safe to drive. Chrysler will not let the service department release me my car until it is updated and fixed, which has no time line currently
Electrical system, Engine, Aug 11, 2025
While driving, the vehicle suddenly shuts down without any prior warning. When this happens, I lose steering and braking capabilities until the vehicle comes to a complete stop. The vehicle must then be towed to the service center, where they reset the fault codes in the computer system and return the vehicle to me. There are two recurring diagnostic trouble codes associated with this issue: Digital Crash Input HCP Code The manufacturer and dealership have stated they have no solution for this defect and have advised me to continue driving the vehicle despite the unresolved safety problem. This defect is extremely dangerous — I have been in several situations where I was nearly involved in an accident when the vehicle shut down during motion.
Steering, Suspension, Electrical system, Aug 8, 2025
The hybrid battery had the potential to catch fire and it was recalled for a software update, the 95b update. After this software update was completed, the vehicle would completely shut down, regardless of being parked or while driving. The dealership deemed the vehicle "unsafe to drive" and has provided a loaner until they can correct the problem. In addition to this, the front suspension has been worked on many times, approximately 5-6 times to remedy a clinking noise when turning at full turn. Currently, they have not been able to remedy this problem. The manufacturer has refused to do a buy back on the vehicle, yet also refuses to give the vehicle back due to, in their words; "It is unsafe to drive".
Power train, Electrical system, Service brakes, Aug 6, 2025
Multiple warnings with the service hybrid system alert coming on the dash. Code B273C-00 was confirmed by the technician at the Napleton Jeep service department. Vehicle can shut off at any time at any speed and there is no resolution at this time to fix the issue. When accelerating over uneven surfaces, the vehicle bucks back and forth violently. This concern was verified with the technician at Napleton Jeep. The shop Foreman contacted Chrysler zone engineering and confirmed that they are aware of this issue but there is no current resolution for this issue. This is highly dangerous when pulling out into traffic.
Power train, Electrical system, Aug 6, 2025
While driving on the freeway, the vehicle suddenly lost all power and control. The “Service Hybrid System” warning began flashing, and I experienced a complete powertrain failure. As the vehicle coasted down to under 5 mph, it abruptly slammed into the electronic parking brake and came to a hard stop. This created a serious safety hazard not only for me but for other drivers on the road. The vehicle had to be towed to the dealership, where it required a jump-start to regain power. The dealer has been unable to replicate the issue, and no diagnostic trouble codes were found during their scan. Despite this, the failure was severe and unpredictable. There were no warning lights or symptoms prior to the event. The vehicle is currently at the dealership and available for inspection.
Power train, Electrical system, Fuel/propulsion system, Aug 5, 2025
On three different occasions, the Jeep randomly turned off on its own. Each time I was stopped, so thankfully I was not injured. I brought it to two different dealerships, one in May 2025 and one in July 2025, and neither of them could fix it. The last dealership advised me not to drive the vehicle due to the safety implications of a stall during driving due to "the digital crash input issue". As a result, I sold my Jeep and bought another vehicle. The vehicle was still under warranty when I sold it.
Electrical system, Other or unspecified, Aug 5, 2025
Car completely shut off while saying the electrical hybrid system needed to be serviced. Car turned back on and light was off. Check engine light going on and off as well. When going lower speeds the cars rpms rev all the way up, almost to the red, and while your pressing the gas doesn’t move but then jerks and goes forward. Your head slams into the seat and it’s extremely unsafe especially if you are in stop and go traffic. The car has been spitting and sputtering. Brought it to the dealership I just purchased it from, I’ve only made one payment. They stated that Chrysler is aware of the problem but that there is no solution as of right now. Extremely unsafe to drive and do not feel safe with my daughter in the car with the car jerking forward and being delayed with the gas and rpms increasing.
Electrical system, Engine, Fuel/propulsion system, Jul 31, 2025
Total loss of power while driving I got a red wrench hybrid system warning light when driving at 45 MPH. The 2022 Jeep Grand Cherokee 4XE lost all power and a warning that told me to pull over when it was safe. The total loss of power almost cause an accident. I waiting a few minutes and the vehicle started up and I drove home. I am reluctant to drive the vehicle.
Electrical system, Jul 30, 2025
Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Electrical system, Forward collision avoidance, Jul 26, 2025
"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken the vehicle to the dealer recently and they performed an update when the radio was blank and AM radio failed to function. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Electrical system, Seats, Forward collision avoidance, Jul 23, 2025
Instrument panel switches to Italian, forward collision off light gets stuck on and my seat moved abruptly while I was driving down the road. I have taken my Jeep into the dealership last year for this problem, it was “fixed” but has come back. Noticed the light stuck on last week. Today while I was driving the panel changed to Italian and my seat moved abruptly. Many people on online forums express experiencing the same problem.
Power train, Electrical system, Jul 21, 2025
Car has a defective hybrid battery that is unrepairable by manufacturer and the vehicle will turn off while driving
Electrical system, Jul 19, 2025
While driving on the highway the vechile showed a hybrid error on dashboard then completely shut down. In order to move I had to stop and restart the car.
Electrical system, Vehicle speed control, Engine, Jul 18, 2025
While driving the vehicle, several warning lights activated, the first being automatic emergency braking is disabled. The second warning light advised me to not turn the car off until I got to my destination. It further advised that I would not be able to shift gears. The vehicle began to slow down on its own until it came to a complete stop. I was in the middle of an intersection when this happened. The dashboard was displaying a message saying press brake and push button to start car. Nothing happened when I did that. I could not shift gears or get the vehicle to move at all. Even though, I was getting the message to push the button to start the vehicle, I believe the vehicle was actually on. I was stuck near the intersection for one hour with a tow truck on the way when I was finally able to turn the e vehicle off. When it turned back on, the check engine light was on and the vehicle was able to drive. It has now happened three times.
Electrical system, Back over prevention, Forward collision avoidance, Jul 13, 2025
"Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Power train, Electrical system, Fuel/propulsion system, Jul 12, 2025
Vehicle suffers from a documented hybrid defect (DTC B273C-00) that causes loss of electric propulsion, disables hybrid modes, and triggers "Service Hybrid Electric Vehicle System" warnings. The problem first appeared around Feb 2025 and was confirmed by FCA’s own STAR bulletins and dealership diagnostics. No validated fix exists; dealership only cleared the fault code temporarily. The defect led to: • Power loss during highway merge on [XXX], with children in the car • Sudden unintended acceleration on [XXX] • Persistent warnings and failure to operate in advertised hybrid/electric modes for over 120+ days FCA refused to repurchase, replace, or permanently repair, despite acknowledging the defect and safety risk in internal documents. The vehicle remains in ICE-only mode, depriving it of the key safety and efficiency features it was designed to provide. The defect significantly raises risk of collision due to unpredictable propulsion response, and no dealership or FCA representative provided written certification the vehicle is safe in all drive modes. Vehicle purchased in Wisconsin but always registered and operated exclusively in Illinois. Arbitration through NCDS confirmed the defect exists but denied relief, citing insufficient corroboration. Problem was reproduced and confirmed by certified dealership and documented in service records. This complaint is part of an ongoing concern that hybrid system EMI issues (like DTC B273C-00) pose systemic safety risk and remain unresolved. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Electrical system, Engine, Jul 10, 2025
The vehicle will suddenly and without warning lose power while in operation in the middle of traffic. The vehicle will coast to a stop without power, no power steering, no power braking, etc. This is an extreme safety concern. The vehicle losing power in traffic and coming to stop poses serious and great risk to the health and safety of both the occupants and any other vehicles and their occupants on the roadway. This has now occurred multiple times, due to the inability of FCA to repair this defect, my family’s health and safety has been repeatedly endangered and will continue to be endangered with continued use of this vehicle. The most recent occurrence of the vehicle losing power and jeopardizing the life, health, and safety of my family occurred on May 9th, 2025 with the service appointment initiated May 10th, 2025. At this time no further repair attempt has been made by FCA. FCA has finally admitted that this is related to code B273C
Electrical system, Fuel/propulsion system, Jul 8, 2025
The car loses power while indicating a battery failure. It does this both while driving and the when idling. It has done so on the highway in traffic twice and around town a handful of times and routinely will do so when idling.
Electrical system, Jul 8, 2025
Red wrench dash warning comes on alerting an issue with the hybrid electrical system. It has been diagnosed by the dealer multiple times with no resolution and warning it could be related to various emergency systems. This has been ongoing since the potential battery fire software update several months ago. Jeep acknowledges the problem but has no fix for it.
Electrical system, Forward collision avoidance, Jul 7, 2025
Without warning or being given an option to reject the update, my vehicle was updated to settings that no longer offer paddle shifting or the ability to enable or disable the Pedestrian Emergency Braking (PEB) system. The latter results in being unable to turn off the Forward Collision Off light on the dashboard. The update also wiped out most of my settings and changed units of measure to the metric system. According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Electrical system, Forward collision avoidance, Jun 29, 2025
Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)