2010 Mazda MAZDA3
Problems, recalls and owner-reported issues
Structure is the leading concern among 686 owner complaints filed for this model year. This is the highest complaint count among 22 MAZDA3 model years with reports.
Of the 2010 reports, 18 involved a crash and 5 involved a fire. 13 people were injured.
What owners report most often
Recalls and investigations
SeatsFeb 9, 2017
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
Campaign 17V082000 on NHTSA.gov
Structure, body, hatchback/liftgateSep 6, 2016
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Campaign 16V644000 on NHTSA.gov
Electrical systemApr 16, 2009
MAZDA IS RECALLING 25,400 MY 2010 MAZDA3 VEHICLES. A CLEARANCE BETWEEN THE ENGINE HARNESS AND THE HOUSING OF STARTER MOTOR MAY BE INSUFFICIENT. DUE TO THIS, THE COVERING OF THE HARNESS MAY BE DAMAGED THROUGH VIBRATION DURING OPERATION POSSIBLY CAUSING A SHORT-CIRCUIT BETWEEN CERTAIN HARNESS WIRES AND THE STARTER HOUSING. A SHORT-CIRCUIT CAN RESULT IN ENGINE CONTROL MALFUNCTION AND/OR POOR SHIFT QUALITY.
THE MAIN FUSE MAY BLOW OUT CAUSING THE ENGINE TO STALL AND INABILITY OF RESTART, INCREASING THE RISK OF A CRASH.
DEALERS WILL HAVE THE ENGINE HARNESS INSPECT AND ADD A PROTECTOR CLIP ON THE AFFECTED SECTION OF THE HARNESS. IF NECESSARY, THE HARNESS WILL BE REPAIRED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON MAY 6, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.
Campaign 09V126000 on NHTSA.gov
Representative owner complaints
686 reports, newest first.
Tires, Wheels, Jul 23, 2013
ONLY OWNER OF A 2010 MAZDA 3. ISSUES WITH CAR SINCE PURCHASING. REPLACED TIRES IN WINTER OF 2012, FEW WEEKS LATER TIRE PRESSURE LIGHT CAME ON. FILLED TIRES WITH AIR. FEW WEEKS LATER, SAME OCCURRENCE. BROUGHT CAR TO THE PLACE WERE THE TIRES WERE PROFESSIONALLY INSTALLED. THE INSPECTED OVER ALL 4 TIRES AND FOUND THAT 2 OF THE 4 TIRE STEMS NEEDED TO BE REPLACED. CALLED MAZDA CORP AND THEY STATED THE CAR NEEDED TO GO TO A DEALERSHIP TO BE DIAGNOSED. ( FOR LEAKING TIRE STEMS ). CALLED MY LOCAL MAZDA WHERE THE CAR WAS PURCHASED, THEY WERE GREAT AND SAID THEY WOULDN'T CHARGE A FEE TO DIAGNOSE LEAKING STEMS AS IT WAS OBVIOUS. THEY DID FIND THAT 2 OF THE 4 WERE BROKEN. 1 WAS ACTUALLY SNAPPED IN HALF. NO DRIVER ERROR NOTED, OR DAMAGE TO RIM. IF YOU GOOGLE THIS ISSUE THERE ARE OTHER COMPLAINTS OUT THERE REGARDING THIS, BUT MAZDA STILL WONT RECOGNIZE THIS AS A SAFETY ISSUE. MY QUESTION BEING... WHAT IF THE STEMS FAILED AT A HIGH RATE OF SPEED ???? *TR
Tires, Jul 17, 2013
WHILE CHECKING A CUSTOMER'S TIRE PRESSURE THE TPMS SENSOR BROKE CAUSING ALL AIR TO ESCAPE THE TIRE, IMMOBILIZING THE VEHICLE. WE HAD A NEW TPMS SENSOR INSTALLED AND THE TIRE REPAIRED FOR $81.41. *TR
Tires, Wheels, Jul 16, 2013
TPMS ALERTED DRIVER TO LOW AIR PRESSURE IN A TIRE. CHECKED TIRE, PRESSURE LOW (SUBSEQUENTLY FOUND SCREW IN TIRE). ONCE AIR NOZZLE PLACE ON VALVE STEM, IT SNAPPED IN HALF AND ALL THE AIR IMMEDIATELY WENT OUT OF THE TIRE. OTHERS CHECKED AND ARE CORRODED AND BRITTLE. DEALER AND LOCAL AUTO MECHANIC BOTH STATED LIKELY TO HAPPEN AGAIN WITHOUT WARNING. MATERIALS USED IN THE VALVE STEM SHOULD BE CHANGED TO MAKE THEM FLEXIBLE, LIKE THE OLDER ONES WITHOUT THE MONITORING SYSTEM. REPLACED VALVE STEM WITH $5 STEM OF FLEXIBLE MATERIAL TO PREVENT SAFETY ISSUE IN THE FUTURE. *TR
Tires, Wheels, Jul 15, 2013
THE DOCUMENTED DATE ABOVE (07/13/13) IS MY MOST RECENT INCIDENT WITH MY VALVE STEM/TIRE PRESSURE MONITORING SYSTEM FALLING OFF WHILE DRIVING. IN JUNE 2012 WITH ~34,000 MILES, WHILE DRIVING ON THE HIGHWAY, MY FIRST VALVE STEM/TPMS FELL OUT, NOT BEING ABLE TO DRIVE ON THAT WHEEL (NO AIR), AND THE WHEEL COULD NO LONGER BE USED UNTIL I HAD A MAZDA DEALER REPLACE THE PART. THIS WAS A VERY DANGEROUS EXPERIENCE FOR MY TIRE TO SUDDENLY DEFLATE WHILE MOVING AT FAST SPEEDS. THIS WAS FIXED UNDER MY ALMOST TERMINATED WARRANTY. ONE MONTH LATER, THE VALVE STEM/TPMS ON ANOTHER WHEEL CAME OFF WHILE DRIVING AND THIS HAD TO BE REPLACED LIKE THE OTHER ONE. MOST RECENTLY, MY THIRD WHEEL TPMSENSOR WENT WHILE ALSO DRIVING ON THE HIGHWAY, VIGILANTLY MAINTAINING CONTROL ON MY VEHICLE UNTIL I COULD PULL OFF THE HIGHWAY. THIS TREND SHOWS A HUGE SAFETY ISSUE/INADEQUATE PARTS USED DURING CONSTRUCTION. THERE IS NO PRESCRIBED CARE FOR THESE PARTS IN THE MAZDA OWNERS MANUAL NOR IS THERE ANYWAY TO KNOW THAT THESE WOULD MALFUNCTION UNTIL THEY DID. 3 OUT OF 4 IS UNACCEPTABLE AND UNSAFE AND SHOULD SHOW A TREND. WHEN I CALLED MAZDA, THEY TOLD ME THAT THE COST OF THIS RECENT REPAIR WAS MINE BECAUSE THE VEHICLE, NOW AT ~55,000 MILES WAS NO LONGER UNDER WARRANTY. THESE PARTS WERE DYSFUNCTIONAL FROM THE BEGINNING AND SHOULD HAVE ALL BEEN REPLACED AT MY FIRST INCIDENT IF THIS WAS TO HAPPEN AGAIN, AND AGAIN. I AM NERVOUS THAT THIS COULD HAPPEN TO MY FOURTH WHEEL WHILE DRIVING, POTENTIALLY CAUSING AN ACCIDENT. *TR
Tires, Wheels, Jun 24, 2013
TIRE PRESSURE MONITORING SYSTEM SENSOR FAILED CAUSING THE TIRE TO BLOWOUT AND GO FLAT ON THE HIGHWAY. THE STEM OF THE SENSOR WAS CORRODED WHICH CAUSED THE INCIDENT. *TR
Power train, Jun 18, 2013
WAS DRIVING ON HIGHWAY AND RPM STARTED TO REV UP, COULDN'T SWITCH GEARS AND CLUTCH GAVE OUT FROM UNDERNEATH ME. LUCKILY WAS ABLE TO ROLL OFF THE HIGHWAY WHEN I NOTICED THE PROBLEM. OF COURSE ONE PROBLEM LEADS TO ANOTHER BATTERY THEN DIED AT THE SHOP, HAD TO REPLACE AS WELL, THIS COMES NOT EVEN A MONTH AFTER THE ROTORS FOR BRAKES HIT THE FAN. THIS HAS GOT TO BE ONE OF THE MOST PROBLEMATIC CARS I HAVE SEEN. A CLUTCH DYING LESS THEN 3 YEARS IS VERY STRANGE AND HAS HAPPENED TO OTHERS AS WELL WITH THIS MODEL. *TR
Electrical system, Engine, Jun 18, 2013
TL* THE CONTACT OWNS A 2010 MAZDA3 . THE CONTACT STATED WHILE ATTEMPTING TO START THE VEHICLE IT FAILED TO START WITH THE ILLUMINATION OF ALL OF THE PANEL LIGHTS. THE VEHICLE WAS TOWED TO THE DEALER FOR DIAGNOSTIC TESTING. THE DEALER STATED THE HARNESS NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED AND THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 46,000. *TR
Tires, Wheels, Jun 11, 2013
TL* THE CONTACT OWNS A 2010 MAZDA MAZDA 3. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 55 MPH, THE TIRE PRESSURE WARNING LIGHT ILLUMINATED. THE CONTACT INSPECTED THE VEHICLE AND NOTICED THAT THE REAR PASSENGER'S SIDE VALVE STEM AND SENSOR WAS CORRODED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE THE VALVE STEM WAS REPLACED. THE VEHICLE WAS NOT REPAIRED. THE VIN WAS NOT AVAILABLE. THE APPROXIMATE FAILURE MILEAGE WAS 80,000. *TR
Other or unspecified, Jun 3, 2013
I HAVE A 2010 MAZDA 3 WITH 38,000. THE DASHBOARD IS MELTING. *TR
Tires, Wheels, Jun 3, 2013
MY TIRE PRESSURE LIGHT WAS ON, I STOPPED AT THE GAS STATION TO PUT SOME AIR IN AND AS I REMOVED THE PLASTIC VALVE CAP THE VALVE CRACKED AND BROKE OFF LEAVING ME WITH A FLAT TIRE. *TR
Structure, Visibility/wiper, May 30, 2013
MY 2010 MAZDA 3 DRIVES FINE AND DOES NOT HAVE MECHANICAL ISSUES. THE ISSUE INVOLVES THE INTERIOR DASHBOARD. SINCE IT WAS MADE FROM SOME TYPE OF RUBBER, THE SUN HAS BEEN MELTING IT. AESTHETICALLY IT DOESN'T LOOK GOOD, BUT WHILE DRIVING TOWARD THE DIRECTION OF THE SUN, THE GLARE IT CAUSES ON MY FRONT WINDSHIELD HAS BEEN AFFECTING MY DRIVING. I HAVE SPOKEN TO A COUPLE OF PEOPLE AT A LOCAL MAZDA DEALERSHIP AND ONE RIDICULOUS EMPLOYEE GAVE ME RECOMMENDATIONS SUCH AS TO PARK MY CAR IN A GARAGE, OR UNDER TREES WHENEVER POSSIBLE. APART FROM THOSE IDIOTIC REMARKS, I WILL HAVE TO PAY OUT-OF-POCKET DUE TO THE FACT THAT I AM NOW PAST MY WARRANTY. I PREVIOUSLY OWNED A MITSUBISHI FOR 10 YEARS AND THAT NEVER HAD ISSUES ALONG THOSE LINES. I HAVE TAKEN VARIOUS PHOTOGRAPHS OF HOW MY VISION IS BEING OBSTRUCTED AND WOULD HAPPILY SEND THEM TO ANYONE I NEED TO. THE CHEAP RUBBER MATERIAL USED FOR THE DASHBOARD SHOULD NOT SIMPLY MELT BECAUSE OF THE SUN. THE SUN WILL ALWAYS BE PRESENT, THEREFORE THESE THINGS SHOULD BE TAKEN INTO CONSIDERATION DURING MANUFACTURING. I WOULD LOVE TO GET THIS ISSUE RESOLVED BEFORE HAVING TO LOSE MONEY AND NEVER DEAL WITH MAZDA AGAIN. OVERALL I LIKE THE CAR, BUT I CANNOT STAND THE WAY THE INTERIOR HAS DIMINISHED IN SUCH A SHORT PERIOD OF TIME. *TR
Tires, Wheels, May 20, 2013
TL* THE CONTACT OWNS A 2010 MAZDA MAZDA3. THE CONTACT STATED THAT THE REAR TIRE PRESSURE SENSORS FAILED. THE VEHICLE WAS TAKEN TO A DEALER AND IT WAS FOUND THAT THE INSIDE OF THE VALVE STEMS HAD RUSTED. THE DEALER DETERMINED THAT THE VALVE STEM NEEDED TO BE REPLACED WITH A RUBBER STEM INSTEAD OF A METAL ONE TO PREVENT RUST. THE VEHICLE HAD NOT BEEN REPAIRED. THE FAILURE MILEAGE WAS NOT AVAILABLE. THE CURRENT MILEAGE WAS 27,000. *TR
Tires, May 18, 2013
BOUGHT A USED 2010 MAZDA 3 5-DOOR IN JANUARY 2013. I WAS DRIVING DOWN THE HIGHWAY ON MAY 18TH 2013 WHEN I SUDDENLY LOST CONTROL OF THE VEHICLE, I CUT OFF TRAFFIC TO GET INTO THE EMERGENCY LANE. NOTICED THAT THE DRIVER SIDE FRONT TIRE WAS FLAT, PUT ON THE SPARE AND TOOK CAR TO THE CLOSEST TIRE REPAIR SHOP (GOOD YEAR TIRE). TURNS OUT THAT THE TIRES TPMS (TIRE-PRESSURE MONITORING SYSTEM) SENSORS THREADS STRIPED CAUSING THE SUDDEN LOSS OF AIR PRESSURE IN THE TIRE. IRONICALLY THE SMALL LITTLE SENSOR THAT IS SUPPOSED TO PREVENT RUNNING ON LOW AIR PRESSURE WAS AT FAULT IN THIS TRAFFIC INCIDENT. *TR
Tires, Wheels, May 17, 2013
ON OR ABOUT 4/24/2012, I HAD TO PURCHASE A NEW SET OF FOUR TIRES AT THE FIRESTONE DEALERSHIP ON ROUTE 36, WEST LONG BRANCH, NJ 732-542-0995. PLEASE ALSO NOTE I HAD MY MAZDA 3I FOR ONLY A LITTLE OVER 2 YEARS AT THAT TIME. WITHIN THE LAST YEAR, I HAVE ALREADY HAD TO REPLACE TWO OF THOSE TIRES DUE TO LEAKS/BLOWOUTS. UPON TAKING MY CAR BACK TO THE SELF-SAME FIRESTONE DEALERSHIP IN WEST LONG BRANCH, NJ FOR CLOSER INSPECTION, ED GONZALEZ, THE MANAGER, INDICATED TO ME THAT THE TIRE VALVE STEM ON THE TIRE MOST RECENTLY "DECEASED"' (LEFT REAR) HAD ACTUALLY FALLEN OUT OF THE TIRE AND INTO THE WHEEL WELL WITHOUT EVER BEING TOUCHED BY ANYONE PREVIOUSLY (I HAVE PHOTOS OF DEFECTIVE STEMS. UPON CLOSER INSPECTION, THE TIRE VALVE STEM IN THE RIGHT REAR TIRE IS ALSO DEFECTIVE TO THE EYE. I HAVE BOTH DEFECTIVE STEMS AND [XXX] WILL ATTEST-IN WRITING-TO THE FACT THAT THEY ARE BOTH DEFECTIVE-AND THE ORIGINAL, FACTORY-INSTALLED TIRE VALVE STEMS THAT I RECEIVED ON MY MAZDA 3I IN FEBRUARY, 2010. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
Electrical system, May 10, 2013
TL* THE CONTACT OWNS A 2010 MAZDA MAZDASPEED3. THE CONTACT STATED THAT THE HORN FAILED. THE VEHICLE WAS NOT TAKEN TO THE DEALER FOR INSPECTION OR REPAIRS. THE FAILURE MILEAGE WAS 37,000 AND THE CURRENT MILEAGE WAS 41,000. *TR
Tires, Wheels, Apr 26, 2013
CHECKING TIRE PRESSURE IN DRIVEWAY AND TPMS SENSOR - TIRE VALVE CRACKED AND FAILED IN 3 OF 4 TIRES/WHEELS. TWO TODAY, AND THE FIRST APPROX. 3 MONTHS AGO. IMAGINE WHAT COULD HAPPEN IF ONE OF THESE VALVES FAILED WHILE . DRIVING DOWN THE HIGHWAY. *TR
Seats, Apr 19, 2013
TL* THE CONTACT OWNS A 2010 MAZDA 3I. THE CONTACT STATED THAT THE DRIVER'S SIDE SEAT WOULD INDEPENDENTLY MOVE BACK AND FORTH WHEN THE CONTACT WAS DRIVING AT ANY SPEED. THE CONTACT STATED THAT THE SEAT BECAME SEPARATED FROM THE BASE DUE TO DEFECTIVE WELDING. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE AND CURRENT MILEAGE WAS 81,160.
Seats, Apr 3, 2013
DRIVER SIDE SEAT APPEARED TO HAVE BAD WELDING ON THE SLIDER AND IT SNAPPED. MAZDA HAS DENIED FIXING THE FAULTY SEAT, CITING THE WARRANTY BEING EXPIRED. *TR
Seats, Apr 2, 2013
WHILE COMING OFF A TURN AT 35 MPH AND BRAKING SLIGHTLY, THERE WAS POP NOISE AND THE DRIVERS SIDE SEAT BEGAN TO ROCK BACK AND FORTH. ONCE I HAD AN OPPORTUNITY TO CHECK THE SEAT IT HAD APPEARED THAT THE WELDING OF THE SEAT HAD SNAPPED AND THERE WAS A PIECE OF METAL THAT WAS ONCE PART OF THE TRACK THAT HAD SNAPPED CLEAN OFF. THERE WAS NOT AN ACCIDENT OR HARD BRAKING. HOWEVER, THIS SEEMS TO BE A DEFECT IN THE WORKMANSHIP OF THE TRACK THAT THE SEAT SITS ON OR HOW IT IS ATTACHED. *TR
Seats, Mar 26, 2013
WHILE DRIVING MY MAZDA3, CAME TO A STOP, UPON ACCELERATING MY SEAT BEGAN TO ROCK SLIGHTLY, ABOUT A WEEK OR SO LATER, CAME TO A STOP AND UPON ACCELERATING MY WHOLE SEAT ROCKED BACKWARDS, TO THE POINT I COULD NO LONGER REACH THE PEDALS. TOOK THE CAR INTO THE DEALERSHIP AND WAS TOLD THE WELDS THAT ATTACH THE SEAT TO THE SEAT TRACK HAD BROKEN. THE SEAT IS NO LONGER STABLE AND SAFE TO DRIVE. SEVERAL CALLS INTO MAZDA, BUT GETTING NO WHERE BECAUSE THE CAR IS OUT OF WARRANTY. OBVIOUSLY THE WELDS CONNECTING THE SEAT TO THE SEAT TRACK, AND THE SUBSEQUENT BREAKING OF THOSE WELDS IS A MANUFACTURING DEFECT THAT CAUSES HUGE SAFETY RISKS FOR ALL DRIVERS OF MAZDA3S. IT IS UNKNOWN WHERE/WHEN THE WELDS WILL BREAK. *TR
Power train, Engine, Mar 22, 2013
HAVE HAD A SITUATION OCCUR ABOUT A DOZEN TIMES SINCE I PURCHASED NEW IN JULY 2010 WITH 93 MILES - NOW AT ~35500 MILES. WHEN COMING TO A STOP ON A COLD ENGINE THAT HAS ONLY BEEN RUNNING ABOUT 2-3 MINUTES, CLUTCH PUSHED IN TO SHIFT OUT OF GEAR AND BRAKES APPLIED ENGINE WILL REV TO ~2500 RPM AND IT WILL STAY THERE FOR ABOUT 3-4 SECONDS. FIRST FEW TIMES IT HAPPENED I FIGURED I HIT THE GAS AS WELL AS THE BRAKE, AFTER THAT I BEGAN TO CHECK MY FOOT POSITION ON OCCURRENCE AND MY FOOT WAS NOWHERE NEAR THE ACCELERATOR. THIS HAS NOT CAUSED ANY PROBLEMS WITH A CAR ACCELERATING ON ITS OWN AS IT TYPICALLY OCCURS AS I AM PUSHING THE CLUTCH IN TO COME TO A STOP. ONLY HAPPENS WHEN THE ENGINE IS STILL COLD (GENERALLY THE FIRST STOP OF THE DAY) AND IS VERY RANDOM WHEN IT OCCURS. HAVE NOT BROUGHT TO ATTENTION OF DEALERSHIP AS THERE ARE NO COMMON FACTORS TO BE ABLE TO REPRODUCE THE PROBLEM. UPON NOTICE OF OTHER COMPLAINTS FOR THIS ISSUE I WANTED TO ADD MY OWN EXPERIENCE. *TR
Seats, Mar 22, 2013
WHILE ACCELERATING FROM A STOP SIGN I HIT A SMALL POT HOLE AND SUDDENLY MY SEAT FLEW BACK. THE SEAT BROKE COMPLETELY FREE FROM THE MOUNTING BRACKETS AT THE TWO FROM MOUNTING POINTS. UPON INSPECTION THE WELDS ON THE MOUNTING BRACKET SNAPPED CLEAN OFF. DUE TO THE SUDDEN RECLINING MOTION MY NECK WAS EXTREMELY SORE FROM THE SUDDEN AND ABRUPT REARWARD RECLINING MOTION THIS CAUSED. IF THIS WERE TO HAPPEN ON THE HIGHWAY TO A PERSON WHO IS SHORTER THEN MYSELF, LOSS OF THE CONTROL OF THE VEHICLE IS VERY POSSIBLE. ONCE I WAS ABLE TO REACH MY DESTINATION I NOTIFIED MAZDA WHO CLAIMS THEY HAVE NEVER HEARD OF SUCH A PROBLEM. UPON FURTHER SEARCHING THE INTERNET I FOUND MANY OTHER MAZDA 3 OWNERS ARE HAVING THE VERY SAME ISSUES. I PURCHASED THE CAR BRAND NEW IN JULY OF 2009 AND IT HAS BEEN MAINTAINED. I HAVE NOT HAD ANY OTHER ISSUES WITH THE VEHICLE. *TR
Seats, Mar 16, 2013
THE VEHICLE INVOLVED IS A 2010 MAZDA MAZDA3. I SAT IN THE FRONT DRIVERS SEAT AND FELT THE DRIVERS SEAT SHIFT BACKWARDS. FROM THAT POINT ON THE SEAT WAS UNSTEADY AND ROCKED FORWARD AND BACKWARD DEPENDING ON WHICH I WAS DOING, ACCELERATING OR BREAKING. UPON EXAMINATION, IT WAS FOUND THAT THE WELD ON THE SEAT BRACKET HAD BROKEN. IN MY OPINION, THIS IS A VERY UNUSUAL BREAK AND COULD BE VERY HAZARDOUS IF IT HAPPENS UPON BRAKING. THIS ISSUE HAPPENED ON 03/15/13. *TR
Tires, Wheels, Mar 6, 2013
TL* THE CONTACT OWNS A 2010 MAZDA MAZDA3. THE CONTACT STATED THAT WHILE DRIVING 65 MPH, THE TIRE PRESSURE WARNING LAMP ILLUMINATED AND AFTER INSPECTING THE LEFT REAR TIRE, THE CONTACT NOTICED THAT THE SLEEVE FOR THE TIRE PRESSURE SENSOR WAS CORRODED. THE CONTACT ALSO NOTICED THAT BOTH OF THE REAR AND THE PASSENGER SIDE TIRE PRESSURE SENSOR SLEEVES HAD DEVELOPED CRACKS. THE VEHICLE WAS TAKEN TO THE DEALER. THE TECHNICIAN VERIFIED THAT THE SENSORS WERE DEFECTIVE AND CORRODED THE INSIDE OF THE TIRE. AS A RESULT, ALL FOUR SENSORS AND ONE OF THE TIRES NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE VEHICLE WAS REPAIRED. THE FAILURE AND CURRENT MILEAGE WAS 58,000. *TR
Tires, Wheels, Feb 25, 2013
TIRE PRESSURE WARNING LIGHT CAME ON, SO I CHECKED THE PRESSURE OF EACH TIRE. ONE WAS LOW, SO I ASKED MY MECHANIC TO FIX IT. HE FOUND THE LEAK WAS A CRACKED VALVE STEM ASSEMBLY, ALLOWING AIR TO ESCAPE ALONG THE VALVE STEM. FORTUNATELY IT DIDN'T DAMAGE THE NEW TIRE, BUT STILL COST $150 TO FIX AND I FOUND THIS TO BE A COMMON COMPLAINT FOR THE MAZDA3. FOR ME, THE SAFETY ISSUE IS HAVING THIS PROBLEM HAPPEN WHEN MY WIFE IS DRIVING THIS CAR ON A TRIP, SEES THE WARNING LIGHT COME ON, AND HAS TO FIND HELP TO FIX IT OR TO CHANGE THE TIRE FOR THE SPARE, OR THE LEAK BECOMES FAST ENOUGH TO GIVE HER A FLAT TIRE. *TR