2011 Ram 1500

Problems, recalls and owner-reported issues

Electrical system is the leading concern among 689 owner complaints filed for this model year. This is the 8th highest complaint count among 17 1500 model years with reports.

Complaints by model year
  1. 689

Of the 2011 reports, 28 involved a crash and 7 involved a fire. 21 people were injured.

Primary concernElectrical system214 reports · 31% of complaints
Owner complaints689Filed with NHTSA
Recall relationship4 safety recallsNHTSA campaign records

What owners report most often

  1. Electrical system214
  2. Power train176
  3. Engine151
  4. Fuel/propulsion system128
  5. Other or unspecified46
  6. Steering45
  7. Suspension40
  8. Exterior lighting29

Recalls and investigations

  1. Fuel system, gasoline, storage, tank assembly, mountingMar 8, 2018

    Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. Exposure to environmental conditions such as water mixed with road salt may cause the front fuel tank strap frame "T-Slot" bracket to corrode, possibly causing the fuel tank to drop and make contact with the ground.

    If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.

    Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.

    Campaign 18V160000 on NHTSA.gov

  2. Power train, automatic transmission, lever and linkage, column shiftDec 20, 2017

    Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

    Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

    Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.

    Campaign 17V821000 on NHTSA.gov

  3. Power train, driveline, differential unitFeb 6, 2013

    Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.

    If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.

    On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.

    Campaign 13V038000 on NHTSA.gov

  4. Suspension, rear, axle, spindleDec 24, 2010

    CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011 RAM 1500 TRUCKS MANUFACTURED FROM SEPTEMBER 2009 THROUGH DECEMBER 2010. SOME VEHICLES MAY HAVE EXPERIENCE A NOISE (GROWL, GRIND) COMING FROM THE REAR AXLE BEARING WHICH COULD EVENTUALLY SEIZE.

    A FAILURE OF THE BEARING COULD CAUSE THE VEHICLE TO STALL INCREASING THE RISK OF A CRASH.

    CHRYSLER WILL NOTIFY OWNERS AND WILL INSTALL AN OIL PORT INSERT INTO THE REAR AXLE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

    Campaign 10V656000 on NHTSA.gov

Representative owner complaints: exterior lighting

29 reports, newest first. Show all

  1. Electrical system, Exterior lighting, Engine, Sep 14, 2013

    AFTER PASSING A SLOW MOVING VEHICLE ON THE HIGHWAY, MY TRUCK SHUT DOWN.THE ENGINE CUT OFF ,DASH LIGHTS AND PARK LIGHT STARTED TO FLICKER ERRATICALLY AND THE HEADLIGHTS WENT OFF. I MANAGED TO PULL THE VEHICLE TO THE SIDE OF THE ROAD. IN ORDER TO STOP THE LIGHTS FROM FLICKERING I DISCONNECTED THE BATTERY (THEY FLICKERED WITH THE SWITCH IN THE OFF POSITION). AS THE LIGHTS FLICKERED I COULD HEAR RELAYS CLICKING UNDER THE HOOD AND DASH. AFTER WAITING A WHILE I RECONNECTED THE BATTERY AND ALL SYSTEMS CAME BACK ON AND I WAS ABLE TO START THE TRUCK AND DRIVE IT HOME. THE DEALERSHIP WILL NOT BE ABLE TO CHECK IT OUT UNTIL WED THE 18. ALL SYSTEMS SEEM TO BE NORMAL. I HAVE TO GO TO WORK . I' M DRIVING IT 60 MILES ROUND TRIP EVERYDAY. *TR

  2. Exterior lighting, Mar 7, 2013

    WHILE DRIVING AT NIGHT IT IS EXTREMELY DIFFICULT TO SEE AND I HAVE HAD MANY NEAR MISS INCIDENTS WHERE BRIGHTER LIGHTS WOULD HAVE PREVENTED SUCH SITUATIONS. WHEN REPORTED TO DODGE THEY SAID THIS IS A COMMON KNOWN ISSUE AND THAT I SHOULD REPORT IT. THE DIMNESS OF THE LIGHTS IS UNACCEPTABLE AND EXTREMELY DANGEROUS WHICH MAKES ME UNCOMFORTABLE WHEN DRIVING AT NIGHT WITH MY FAMILY OR FRIENDS. *TR

  3. Exterior lighting, Apr 24, 2012

    2011 DODGE RAM 1500. CONSUMER STATES WHEN HIGH BEAMS ARE TURNED ON LOW BEAMS DO NOT WORK *TGW THE CONSUMER STATED THE DEALER HAD HIM SHINE THE LIGHTS ONTO AN OPEN WALL, AND ONLY THE HIGH BEAMS HIT THE WALL WHEN THEY WERE TURNED ON. THE CONSUMER WAS INFORMED THE LIGHTS WERE WORKING AS DESIGNED AND NO FURTHER ASSISTANCE WOULD BE GRANTED. *JB

  4. Exterior lighting, Dec 15, 2011

    TL* THE CONTACT OWNS A 2011 DODGE RAM 1500. THE CONTACT STATED THAT THE HEADLIGHTS WERE VERY DIMLY LIT, AS WELL AS THE HIGH BEAM HEADLIGHTS. THE DEALER WAS CONTACTED DID NOT OFFER ANY ASSISTANCE. THE MANUFACTURER WAS NOT NOTIFIED AND THE VEHICLE WAS NOT REPAIRED. THE CURRENT MILEAGE WAS 5,000 AND THE FAILURE MILEAGE WAS 300.