2019 Toyota Corolla
Problems, recalls and owner-reported issues
Power train is the leading concern among 204 owner complaints filed for this model year. This is the 15th highest complaint count among 26 Corolla model years with reports.
Of the 2019 reports, 23 involved a crash and 1 involved a fire. 15 people were injured and 1 person died.
What owners report most often
Recalls and investigations
Air bags, air bag/restraint control moduleJan 17, 2020
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2011-2019 Corolla, 2011-2013 Matrix, 2012-2018 Avalon, and 2013-2018 Avalon Hybrid vehicles. During certain crashes, the air bag electronic control unit (ECU) may malfunction, possibly disabling the deployment of the air bags and/or seat belt pretensioners.
In the event of a crash, air bags and/or seat belt pretensioners that do not deploy as intended may increase the risk of injury.
Toyota will notify owners, and dealers will inspect the ECU and install a noise filter between the air bag control module and its wire harness, as necessary, free of charge. Owners were notified of the safety risk beginning March 2, 2020. A second letter notifying owners of the remedy repair will be mailed between March 16, 2020 and June 27, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 20TB03, 20TA03 and 20TA05.
Campaign 20V024000 on NHTSA.gov
Fuel system, gasoline, delivery, fuel pumpJan 13, 2020
Toyota Motor Engineering & Manufacturing (Toyota) recalled certain 2018-2019 4Runner, Highlander, Camry, Land Cruiser, Sequoia, Sienna, Tacoma and Tundra, and Lexus RC 300, RC 350, GS 350, GX 460, IS 300, LC 500, LS 500, LX 570, RX 350L, and 2019 Toyota Avalon and Corolla, and certain Lexus NX 300, and ES 350 vehicles on January 13, 2020. On March 4, 2020, Toyota expanded the recall to include certain 2014-2015 Toyota 4Runner and Land Cruiser, 2018 Avalon, Corolla, 2014 FJ Cruiser, 2017 Sienna and Lexus 2018 ES 350, 2018-2019 GS 300, 2013-2014 GS350, 2014-2015 GX 460, IS 350 and LX 570, 2014 IS F, 2018-2019 IS 350, LC 500H and LS 500H, 2013-2015 LS 460, 2015 NX 200T and RC350, 2017 RC 200T and RX 350. Toyota also removed the 2018-2019 Toyota 4Runner and Land Cruiser and 2018-2019 Lexus GX 460 and LX 570 and 2019 NX300 from inclusion in this recall. On March 19, 2020, Toyota expanded the recall to include 2015 Lexus GS350 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.
Toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began May 4, 2020. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20TB02 and 20TA02 for Toyota vehicles and 20LB01 and 20LA01 for Lexus vehicles.
Campaign 20V012000 on NHTSA.gov
Equipment, other, labelsJun 28, 2019
Southeast Toyota Distributors, LLC (SET) is recalling certain 2017-2019 Toyota Camry, Corolla, Rav4, Sienna, and Yaris iA vehicles equipped with factory-installed floor mats. The load carrying capacity modification label may be incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
SET will notify owners and provide a corrected label for placement over the inaccurate label, free of charge. The recall began August 23, 2019. Owners may contact Toyota customer service at 1-888-270-9371. SET's number for this recall is SET19A.
Campaign 19V503000 on NHTSA.gov
Equipment, other, labelsMar 27, 2019
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
Campaign 19V244000 on NHTSA.gov
Power train, automatic transmission, torque converterDec 19, 2018
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota Corolla hatchback vehicles equipped with Continuously Variable Transmissions (CVT). The pump impeller blades within the torque converter may detach, especially when driven under high load, potentially causing a vehicle stall.
A vehicle stall, especially when driving a high rate of speed, can increase the risk of a crash.
Toyota has notified owners, and dealers will replace the CVT and torque converter, free of charge. The recall began April 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J17/J07.
Campaign 18V901000 on NHTSA.gov
Representative owner complaints: power train
56 reports, newest first. Show all
Power train, Sep 24, 2026
The contact owns a 2019 Toyota Corolla. The contact stated that while driving at an undisclosed speed, the clutch was depressed; however, the clutch system failed to operate as intended. The contact stated that the clutch was stuck to the floorboard. The contact stated that due to the failure, there was an excessive amount of clutch fluid leaking onto the ground. The vehicle was towed to the residence. The contact stated that the failure was a known failure. The manufacturer was contacted by phone and a case was filed. The failure mileage was approximately 104,000.
Power train, Sep 16, 2026
Component that failed was the CSC Concentric Slave Cylinder. I went to press the clutch and it stuck to the floor. I checked for leaks in the cabin beneath the clutch and it was dry. I then proceeded to check the reservoir and saw that it needed fluid. I managed to get it to a nearby convenience center to purchase and fill the reservoir when that did not work I called a tow truck to move it to an auto repair shop. This put others at risk, should the clutch have remained in neutral I would have, and or all the break fluid would have leaked and i would have been without brakes since the clutch and break share a reservoir. This issue could have caused serious life threatening injuries not only to myself but others had there been an accident. Thankfully this took place at 4 am before other drives were out and about for the morning commute. The component has since been looked at by an independent service center. There were no warning lamps or messages prior to the issue. the vehicle currently has roughlty 84,000 miles.
Power train, Sep 10, 2026
Slave cylinder on clutch failed and leaked fluid in to clutch and flywheel. Clutch pedal would not rebound after being pressed in to shift gear, stuck in middle of road trying to get vehicle in first gear. Had vehicle towed to dealership, estimate of 5800 to repair. Apparently this is a known problem with this manual transmission, many others have experienced similar failure at around 60,000 miles.
Power train, Apr 11, 2026
Premature slave cylinder failure at ~70k miles. Suddenly started leaking brake fluid profusely. Inspected and confirmed by Toyota dealership. No symptoms prior to failure. Clutch stopped functioning, unable to shift while driving. Pulled over to inspect and all of the brake fluid had leaked out. Refilled brake fluid and bled system, reservoir leaked to minimum fill line within 24 hours.
Power train, Apr 7, 2026
DESCRIPTION OF SAFETY ISSUE: The Concentric Slave Cylinder (CSC) on my 2019 Toyota Corolla Hatchback 6-speed manual failed during normal driving at around 60mph, creating an immediate and uncontrolled safety hazard. The clutch pedal depressed fully to the floor while I was shifting from 5th gear to 6th gear and the vehicle became unable to be shifted out of gear, leaving me unable to properly control vehicle speed or movement. The only way to release the transmission was to physically reach down and lift the clutch pedal up with my foot while attempting to drive. CRITICAL SAFETY CONCERN - SHARED BRAKE AND CLUTCH FLUID RESERVOIR: On this vehicle, the brake fluid reservoir and clutch hydraulic system share a single reservoir. When the CSC fails and leaks fluid, brake fluid is consumed directly from the same reservoir that supplies the braking system. A CSC failure does not only result in loss of clutch function — it results in loss of brake fluid, and with sufficient fluid loss, partial or complete brake failure. This is not a theoretical risk. This vehicle can fail in a way that simultaneously removes the driver's ability to control vehicle speed via the transmission AND reduces or eliminates braking capability — both at the same time, without warning I am requesting that NHTSA investigate this as a safety defect and consider whether a recall or service campaign is warranted given the risk of simultaneous clutch and brake failure on these vehicles.
Power train, Apr 2, 2026
6 speed manual transmission. 79K miles. Vehicle was checked at a dealer due to a sluggish clutch. Dealer found low brake fluid, but no problems with the clutch. The next day the clutch failed completely and car had to be towed off the highway. Slave cylinder for the clutch is a design flaw on these vehicles.
Power train, Mar 28, 2026
Clutch release bearing/slave cylinder failed at 29,900 miles. Without warning or unusual symptoms, clutch pedal stuck to floor and was unable to shift gears without manually pulling clutch pedal up.
Power train, Mar 27, 2026
The clutch slave cylinder in my 2019 Toyota Corolla Hatchback failed, causing brake fluid to leak out. The leaking fluid contaminated the clutch assembly, resulting in both the slave cylinder and clutch needing replacement. The failed components should be available for inspection from the repair facility upon request. The failure led to a loss of proper clutch operation, which made it difficult to shift gears and control the vehicle. This created a risk of stalling in traffic or being unable to accelerate when needed, increasing the potential for a collision, especially in busy or high-speed driving conditions. Yes, the issue was diagnosed and confirmed by the dealership. They identified the failed slave cylinder and verified that brake fluid leakage caused contamination of the clutch, requiring replacement of both components. The vehicle has been inspected by a service technician/mechanic at the Toyota dealership. Prior to the failure, there were no warning lights or dashboard messages indicating a problem. The issue appeared suddenly when the clutch began to malfunction due to the fluid leak causing me to not be able to shift gears and the clutch pedal not returning.
Power train, Mar 9, 2026
2019 Toyota Corolla hatchback. Complete transmission failure.
Power train, Dec 27, 2025
Clutch stopped working while driving. Car has 61,000 miles.
Power train, Other or unspecified, Nov 25, 2025
My 2019 hatchback clutch failed Clutch Release Bearing and Slave Cylinder Assembly is leaking. Toyota part # 31400-19027
Power train, Nov 20, 2025
rattle in transmission. Car hesitates to accelerate randomly leading to unpredictable acceleration sometimes. Transmission is failing.
Power train, Nov 10, 2025
All 2019-2022 Toyota Corolla 6 Speed Manual Transmission cars are affected. The slave cylinder is a defective part that fails prematurely anywhere between the 20,000-70,000 mile range. The slave cylinder on this car is made out of plastic and is located inside of the transmission, when the slave cylinder fails, it leaks brake fluid all over causing the car to lock into gear and not be able to shift which is a major safety risk when there is no signs of failure. My car locked up in the middle of a busy highway and had to be pushed off the side of the road. Not only is this a safety risk, but since the part is located inside of the transmission, which is not normal, it leaks brake fluid all over the clutch and flywheel, which will all need replacement. The dealership quotes between 4-5 thousand dollars to repair, and is not covered under warranty. Toyota knows that this part is a defective part because the new models received an updated slave cylinder made out of metal, rather than plastic, but no cars have been recalled. The car was towed to my local dealership and it is currently being worked on. The incident was reported to Toyota Corporate and a case was opened to investigate this issue. Every single model made between those years are effected and has caused thousands of people to be left with an expensive repair that is unavoidable.
Power train, Nov 8, 2025
Manual transmission intermittent failure to/rough to engage first gear and reverse. Clutch slave cylinder high rate of failure/total failure of manual transmission. Transmission incidents happen at least once per day.
Power train, Other or unspecified, Sep 25, 2025
My clutch slave cylinder broke. This is a known problem for 6mt toyota corolla hatchbacks yet there hasn't been a recall. Some go bad as soon as 40,000 miles which is very premature.
Power train, Engine, Fuel/propulsion system, Aug 17, 2025
I have a 2019 Toyota Corolla Hatchback. The problems started on July 21st, 2025. While driving my 2019 Toyota Corolla Hatchback, I noted white exhaust smoke, even after the engine was warm. One week prior, I had filled the coolant reservoir, but when I checked it, the coolant was almost gone again. There were no visible leaks or puddles under the car. I refilled the coolant, but within days the car began shaking severely upon startup and emitted a coolant-burning smell. 5 minutes after, multiple warning lights illuminated on the dashboard simultaneously. I replaced the car battery, and the warnings disappeared. However, while merging onto the freeway, the same warning lights came back, the car lost power, and I could not accelerate above ~25 mph. If this occurred in heavy traffic, it could lead to a serious collision. I exited the freeway and had the car towed. DTCs from the independent mechanic and the Toyota dealer included: P11ED00 P030085 P030027 P030200 (Cylinder 2 misfire) C142571 (Stop light relay actuator stuck) U1117 B2284 B15AD The Toyota dealer identified a “Port Injector #2 malfunction” and recommended replacing all four injectors (~$2,000) but could not confirm this would fix it. They noted a coolant-burning smell but advised addressing the misfire first before further diagnosis. There is an active class action lawsuit alleging that 2019–2023 Toyota Corolla and RAV4 models have defective coolant bypass valves that may cause engine issues, overheating, or coolant loss without visible leaks. This matches the coolant loss, white exhaust smoke, and eventual power loss while driving. I request that NHTSA investigate this issue in connection to the reported coolant bypass valve defects affecting 2019–2023 Toyota Corolla models.
Power train, Jul 25, 2025
Slave cylinder failure. 90,000 miles. Multiple complaints about the issue.
Power train, Feb 26, 2025
The contact owns a 2019 Toyota Corolla Hatchback. The contact stated that while approaching a stop light, the contact depressed the brake pedal and the clutch pedal; however, while attempting to release the clutch pedal, the clutch pedal lowered to the floorboard independently. There were no warning lights illuminated. The contact coasted to the side of the road, maneuvered the gear shifter into second gear, and drove the vehicle to the residence without the proper use of the clutch. The vehicle was not taken to the dealer to be diagnosed or repaired. The manufacturer was not made aware. The failure mileage was 80,000. 04/15/2025: The contact wanted add to the complaint the vehicle had been taken two independent mechanics and the vehicle was diagnosed with slave cylinder failure. The vehicle had been repaired.
Power train, Dec 22, 2024
premature failure of clutch components: throwout bearing, clutch slave cylinder (which doubles as master brake cylinder). This type of failure, particularly when vehicle is in motion, will prevent the ability to change gears, as well as potential for brake failure if loss of fluid is great enough. This is a clear and obvious road hazard and the failure occurs within or just outside of factory warranty period and Toyota corp has been unwilling to pay for repairs on this particular failure. This system will fail without warning and there's no indication as to when this part will fail
Power train, Dec 10, 2024
Clutch throwout bearing went out at 69,000. Clutch pedal began getting stuck half way through pedal travel, then got stuck to floor. Lost all clutch operation.
Power train, Vehicle speed control, Engine, Nov 24, 2024
As I was driving my check engine light turned and also another message saying “Drive-Start control malfunction”. A few second after another light came one showing “Engine coolant Temp high. On 11/24/24 I experienced this mechanical failure as I was driving. I was driving behind another car, where my car suddenly lost power and randomly accelerated almost causing me to crash behind the car in front of me. Thankfully I had time to press on the brakes to prevent me from crashing. I also did some research to see if other drivers also experienced this fault and seems that a lot of people with these Toyota Corolla and RAV4 models. I also found that an active lawsuit is ongoing against Toyota regarding this same issue. This definitely should be something that needs to be recalled as it puts our lives at risks to either crash or even catch on fire due to overheating. My vehicle gets serviced regularly.
Power train, Nov 21, 2024
The transmission slave cylinder on this vehicle leaks and causes multiple issues with the transmission. it is a known issue among all manual transmission owners and resulting on average 4000 dollar repair.
Power train, Nov 13, 2024
No warning lamps, and no accident yet; however, I believe if I continue driving it without repair, it is a safety risk. The sound I can hear coming from CVT torque converter, impeller blades is getting louder the more I drive them vehicle. This was confirmed by a transmission service center (see photo) who identified a toyota recall J17/J07 (NHTSA recall campaign 18V901000), which lists the 2019 Toyota Corolla hatchback with the same CVT as my vehicle. When I contacted Toyota (see screenshot), I was told I would be responsible for the repair because there's no recall associated with my vehicle VIN pertaining to CVT torque converter.
Power train, Other or unspecified, Engine, Sep 4, 2024
Engine coolant bypass valve
Power train, Jul 29, 2024
Transmission is in sport mode stopped at red light loud snapping sound and car lunged forward. Revs up with the transmission slipping with out forward movement acceleration after switching to drive mode it runs normally. Drove home didn't want to push my luck out on the road 38,683 miles on the vehicle