2021 Winnebago Adventurer

Problems, recalls and owner-reported issues

Vehicle speed control is the leading concern among 8 owner complaints filed for this model year. This is the highest complaint count among 4 Adventurer model years with reports.

Complaints by model year
  1. 8
Primary concernVehicle speed control5 reports · 63% of complaints
Owner complaints8Filed with NHTSA
Recall relationship3 safety recallsNHTSA campaign records

What owners report most often

  1. Vehicle speed control5
  2. Service brakes4
  3. Equipment2
  4. Other or unspecified2
  5. Forward collision avoidance1
  6. Other/i am not sure1
  7. Steering1

Recalls and investigations

  1. Exterior lighting, turn signalMar 23, 2026

    Winnebago Industries, Inc. (Winnebago) is recalling certain 2017 Brave, 2019 Itasca Sunova, 2019-2022 Adventurer, and 2022 Sunstar motorhomes. The front turn signals may have a smaller than required luminous lens area. As such these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 108, "Lamps, Reflective Devices, and Associated Equipment."

    A small lens can make it difficult for other drivers to see the turn signal, increasing the risk of a crash.

    Dealers will replace the turn signals, free of charge. Owner notification letters were mailed May 8, 2026. Owners may contact Winnebago Customer Care at 1-800-537-1885. Winnebago's number for this recall is 203.

    Campaign 26V177000 on NHTSA.gov

  2. Latches/locks/linkages, hood, latchNov 1, 2024

    Winnebago Industries, Inc. (Winnebago) is recalling certain 2014-2018 Sightseer, Itasca Sunova, 2016-2025 Forza, Vista, and Itasca/Winnebago Sunstar, 2015-2025 Adventurer, 2015-2024 Commercial Vehicle, 2015-2028 Itasca Suncruiser, and 2016-2017 Itasca Solei recreational vehicles. The hood bracket adhesive may have been incorrectly applied which can allow the bracket to detach.

    A detached hood bracket may become a road hazard and increase the risk of a crash.

    Dealers will inspect and repair as necessary, free of charge. Owner notification letters began being mailed January 31, 2025. Owners may contact Winnebago at 1-800-537-1885. Winnebago's number for this recall is 192.

    Campaign 24V826000 on NHTSA.gov

  3. EquipmentNov 13, 2020

    Winnebago Industries, Inc. (Winnebago) is recalling certain 2021 Revel, Vista, Sunstar, and Adventurer Motorhomes. The power bed motor may experience an internal gear failure, causing the bed to extend prior to the safety strap engaging.

    A bed that falls unexpectedly increases the risk of injury or death.

    Winnebago will notify owners, and dealers will replace the power bed motor, free of charge. The recall began December 16, 2020. Owners may contact Winnebago customer service at 1-641-585-6939 or 1-800-537-1885. Winnebago's number for this recall is 164.

    Campaign 20V703000 on NHTSA.gov

Representative owner complaints: service brakes

4 reports, newest first. Show all

  1. Service brakes, May 18, 2023

    Advances Service Trac lights illuminates and disengages Anti-Lock Brake System and Hill Assist Feature. Ford has issued TSB SSM 51210 but refuses to reprogram the ABS Module. This is per Ford Pro Customer Service Supervision.

  2. Vehicle speed control, Service brakes, Forward collision avoidance, May 5, 2023

    Ford has known of a Service Trac fault appearing which disables the Anti Lock Brake, Hill Assist Control , and Cruise Control. Ford issued TSB 51210. However within that TSB the fault code must be active in order to complete the reprogramming thus there lies the problem. Once the fault code appears and the ignition switch is turned off the fault code resets. Ford has no solution for the problem allowing hundreds of F53 Motorhome Chassis on the road where the anti brake system is failing thus causing a safety problem in the right conditions. I will be submitting for a congressional inquiring into Ford Motor Company.

  3. Steering, Service brakes, Vehicle speed control, Apr 27, 2023

    The Ford F53 Chassis built for motorhomes has a Ford Factory Advance Trac Warning System. When this system detects a fault the chassis looses Cruise Control, Hill Assists Feature, and Anti Lock Brakes. The Ford Pass App records the faults; however once the Ignition is turned off it erases the fault from the onboard computer. Ford has issue a TSB SSM51210 to reprogram the ASB Module only when the code is active. As stated before once the ignition is turned off the codes are erased. The problem with that scenario is that there are very limited dealerships and companies that will work or have the capability of diagnosis of the system. The safety problem comes when transiting a step grade and Hill Assist and ABS becomes inactive or during wet/icy conditions when Anti Lock Brake System become unexpected in active with no warning. 1. Advance Trac Service Required 2. Cruise Control, ABS, Hill Assists becomes inactive 3. Iginition switch turned off clears fault 4. Limited service facilities for motorhomes 5. Safety when transiting steep grades and wet/icy conditions

  4. Vehicle speed control, Service brakes, Aug 15, 2022

    Failure ABS, Advanced Trac and Cruise Control. Available for inspection. Braking and Trac control safety. Confirmed by McRee Ford Dickenson, TX. Only inspected by Ford Dealer. Dash lights came on and cruise control loss a couple of hundred miles after we left the dealership. Dealer replaced sensor. Everything working until we hit a rough road and all of the above stopped working. This is not a new problem, if you read the Ford Forums, is not addressing.