2006 BMW 3 Series
Problems, recalls and owner-reported issues
Air bags is the leading concern among 1,243 owner complaints filed for this model year. This is the highest complaint count among 21 3 Series model years with reports.
Of the 2006 reports, 29 involved a crash and 40 involved a fire. 23 people were injured.
What owners report most often
Recalls and investigations
Engine and engine cooling, exhaust system, emission control, crankcase (pcv)Mar 2, 2022
BMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
An electrical short can cause the PCV valve heater to overheat, increasing the risk of a fire while driving or, soon after driving when parked.
This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Dealers will install an electrical wiring harness with fuse protection for the PCV Valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on April 1, 2022. Owner notification letters were mailed on July 22, 2022. Owners may contact BMW customer service at 1-800-525-7417.
Campaign 22V119000 on NHTSA.gov
Engine and engine cooling, cooling system, fanAug 10, 2012
This recall involves aftermarket parts sold by Valeo. Valeo is recalling certain engine cooling fans, part numbers 696121, 696273, and 696275, used as service replacement parts for model year 2008-2011 BMW 1-Series, 2006-2011 BMW 3-Series, 2000-2009 BMW 5-Series, 2004-2005 BMW 6-Series, and 2006-2007 BMW 7-Series vehicles. A metal-oxide semiconductor may overheat due to insufficient screwing of the semiconductor on the aluminum heat sink. This primary failure could cause adjacent components on the fan assembly motor circuit board to overheat and short.
This condition could cause the fan motor to become inoperative, or cause the motor circuit board in the assembly to overheat, potentially leading to a fire in the engine compartment.
Valeo will notify owners and replace the fans free of charge. The safety recall began on August 22, 2012. This recall is being conducted by Valeo, not by BMW. For further information, owners may contact Valeo at 1-888-718-2536.
Campaign 12E029000 on NHTSA.gov
Air bags, frontalAug 5, 2008
BMW IS RECALLING 200,000 MY 2006 3 SERIES SPORT SEAT, MY 2004-2006 5 SERIES STANDARD AND SPORT SEAT, AND MY 2004-2006 X3 PASSENGER VEHICLES. DEPENDING ON THE MANNER AND FREQUENCY OF THE FRONT PASSENGER'S ENTRY AND EXIT, SMALL CRACKS HAVE DEVELOPED IN THE MAT. IF THIS OCCURS, THE FRONT PASSENGER AIR BAGS, WITH THE EXCEPTION OF THE HEAD PROTECTION SYSTEM, WILL BE DEACTIVATED AND THE AIR BAG WARNING LAMP AS WELL AS THE PASSENGER AIR BAG "ON-OFF" LAMP WILL BE ILLUMINATED.
IN THIS SITUATION THE FRONT PASSENGER AIR BAGS WILL NOT DEPLOY EVEN IF A SUFFICIENTLY SEVERE ACCIDENT WOULD OCCUR AND OCCUPANT PROTECTION PROVIDED BY THE SYSTEM WOULD NOT BE POSSIBLE.
DEALERS WILL REWORK THE FRONT PASSENGER SEAT SENSOR MAT SO THAT EXTERNAL FORCE APPLICATION TO THE SEAT DOES NOT CAUSE A CRACK TO THE MAT. THE RECALL BEGAN ON NOVEMBER 6, 2008. BMW WILL ALSO EXTEND THE WARRANTY ON THESE VEHICLES TO 10 YEARS FROM FIRST REGISTRATION WITHOUT ANY MILEAGE LIMIT. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
Campaign 08V384000 on NHTSA.gov
Suspension, front, control armOct 18, 2006
ON CERTAIN VEHICLES, ONE OF THE SUSPENSION CONTROL ARM AND SWIVEL BEARING CONNECTION BOLTS WAS NOT TIGHTENED CORRECTLY. THE BOLTED CONNECTION COULD LOOSEN.
THE BOLTED CONNECTION COULD BREAK WHICH COULD IMPAIR VEHICLE HANDLING AND CONTROL, INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT THE BOLTED CONNECTION AND, IF NECESSARY, ADJUST THE CONNECTION. IN SOME CASES, IT MAY BE NECESSARY TO REPLACE THE SUSPENSION CONTROL ARM AND THE SWIVEL BEARING. THE RECALL BEGAN ON NOVEMBER 21, 2006. OWNERS MAY CONTACT BMW AT 1-800-831-1117.
Campaign 06V400000 on NHTSA.gov
Representative owner complaints: engine
144 reports, newest first. Show all
Engine, Sep 12, 2016
MY 2006 BMW 325I LEAKS OIL. THE MANUFACTURER BOLTS ARE DEFECTIVE AND THERE ARE OTHERS WITH SIMILAR ISSUES. I'M CONCERNED MY CAR MY CATCH ON FIRE DUE TO THE OIL LEAKS
Engine, Jul 27, 2016
ENGINE VALVE COVER GASKET LEAKING OIL AND OIL FILTER HOUSING LEAKING OIL SINCE LAST YEAR.
Engine, Jul 27, 2016
THERE IS A CLEAR MANUFACTURER DEFECT CONCERNING THE ALUMINUM BOLTS ASSOCIATED WITH THE VALVE COVER GASKET AND CYLINDER HEAD ON THE BMW 2006 325I'S. THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION HAS RECEIVED SEVERAL COMPLAINTS REGARDING THIS MANUFACTURER DEFECT. THE ALUMINUM BOLTS HAVE BEEN REDESIGNED SINCE DISCOVERING THE MANUFACTURER DEFECT. BMWNA HAVE HAD NUMEROUS SERVICE ISSUES RELATED TO THESE DEFECTIVE ALUMINUM BOLTS. THEY HAVE ALL OPENLY ADMITTED THAT THE BOLTS IN QUESTION WERE DEFECTIVE IN NATURE AND PRODUCTION, AND THAT THE BOLTS HAVE BEEN REDESIGNED TO AVOID FUTURE FAILURES. SOME OF THESE COMPLAINTS INCLUDED, AND RESULTED IN, VEHICLES LEAKING OIL IN THE ENGINE AREA CAUSING FIRES IN THE VEHICLE. THE DEFECTIVE BOLTS POSE A SERIOUS POTENTIAL RISK TO THE SAFETY OF THE OWNERS OF THESE VEHICLES, AS WELL AS TO OTHER DRIVERS WHO SHARE THE ROADWAY WITH THEM. IT IS MY STRONG BELIEF THAT THIS TYPE OF PUBLIC SAFETY RISK CANNOT GO ON ANY FURTHER WITHOUT PROPER INTERVENTION FROM THE GOVERNMENTAL AGENCIES WE EMPLOY AS TAXPAYERS. I RESPECTFULLY REQUEST THAT BMW NORTH AMERICA ISSUE A VOLUNTARY RECALL OF THE BMW 2006 325I'S AFFECTED BY THIS MANUFACTURER DEFECT. I AM NOT PRIVY TO WHAT CONSTITUTES A VEHICLE'S DEFECTIVE COMPONENTS TO REACH A "RECALL STATUS".I HAVE DILIGENTLY MAINTAINED MY VEHICLE AS PRESCRIBED BY THE SERVICE MANUALS, AS WELL AS THE ON BOARD COMPUTER IN THE VEHICLE. MY CONTENTION IS EXTREMELY CLEAR; THE ALUMINUM BOLTS ARE A MANUFACTURER DEFECT! PLEASE FIX THEM ALL AT NO COST TO THE CONSUMER.
Engine, Jul 18, 2016
I AM YET ANOTHER BMW OWNER REPORTING VALVE VMCOVER GASKET ISSUES. BMW IS NOT BEING MADE TO RECALL THIS PART. ALUMINUM BOLTS THAT NEVER SHOULD HAVE BEEN USED AND WERE LATER REPLACED GOING FORWARD BUT HAVE NOT BEEN ADDRESSED. THIS IS A SERIOUS CONCERN FINANCIALLY FOR COUNTLESS OWNERS THAT HAVE HAD TO GET THESE FIXED, AND IS A SAFETY CONCERN AS LEAKING OIL COULD CAUSE ENGINE FIRES. MAKE THIS RIGHT NHTSA BY HOLDING BMW RESPONSIBLE FOR THIS DEFECT THAT THEY HAVE BEEN WELL AWARE OF FOR TEN YEARS.
Air bags, Engine, Apr 11, 2016
TL* THE CONTACT OWNS A 2006 BMW 325I. WHILE DRIVING AT VARIOUS SPEEDS, THE AIR BAG WARNING LIGHT ILLUMINATED. THE FAILURE OCCURRED CONSTANTLY. IN ADDITION, THE CONTACT NOTICED OIL LEAKING FROM AN UNKNOWN SOURCE UNDER THE HOOD. THE VEHICLE WAS TAKEN TO A DEALER WHERE IT WAS DIAGNOSED THAT THE AIR BAG SENSOR FAILED AND NEEDED TO BE REPLACED. THE CONTACT COULD NOT PROVIDE DETAILS OF THE OIL LEAK FAILURE. THE VEHICLE WAS REPAIRED, BUT THE FAILURE RECURRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND ASSISTED IN REPAIRS DUE TO A WARRANTY. THE FAILURE MILEAGE WAS 16,000.
Engine, Jan 11, 2016
FIND ENGINE OIL LEAKING ON FLOOR AND SMILE OIL BURNING. THEN, FIND A BOLT FOR ENGINE VALVE COVER IS BROKEN. IT MAKE CATCHING FIRE!!!
Steering, Engine, Nov 21, 2015
BELT TENSIONER BOLT BROKE OFF CAUSING SERPENTINE BELT TO SLIP OFF CAUSING ENGINE TO FAIL. CAR WAS BEING DRIVEN WHEN CAR STARTED TO LOSE POWER AND POWER STEERING STOPPED WORKING. I HAVE NO DOCUMENTATION YET BECAUSE CAR HAS JUST BEEN DIAGNOSED AND IS IN REPAIR SHOP NOW. I FOUND ONLINE THAT THIS HAS HAPPENED TO OTHERS AS WELL.
Engine, Oct 25, 2015
FOUND OUT TODAY, AFTER MAY ATTEMPTS TO RESOLVE A NOISE IN THE FRONT END. THE RIGHT FRONT MOTOR MOUNTS BOLTS HAD BROKEN, CAUSING THE ENGINE TO MOVE VERY FREELY INSIDE THE ENGINE. THIS WAS ONLY FOUND OUT AFTER A COMPLETE RIGHT FROM DRIVE AXLE FAILURE DUE TOT HE POSITION OF THE ENGINE CAUSING THE CV BOOT TO RUB THE SUB FRAME. THIS CAUSED A COMPLETE LOSS OF CV GREASE, AND SUBSEQUENT FAILURE OF THE CV JOINT. THE CV JOINT THEN PROCEED TO GRENADE WHILE DRIVING OVER SOME RAIL ROAD TRACKS. THE OUTER AXLE THEN DROVE ITSELF INTO THE GROUND CAUSING THE VEHICLE TO RISE, AND LOSS OF CONTROL FOR A BRIEF MOMENT. THE CAR CAR TRAVELING AT APPROXIMATELY 25 MPH. UPON FURTHER INVESTIGASTION I FOUND THIS IS NOT AN ISOLATED INCIDENT WITHT HE MOTOR MOUNT BOLTS SHEERING OFF FLUSH TO THE ENGINE.
Engine, Oct 11, 2015
NOTED VIBRATION WITH VEHICLE RUNNING IN GEAR WHEN STOPPED, DURING INSPECTION NOTED BOLTS ON RIGHT SIDE MOTOR MOUNT BROKEN OFF FLUSH WITH THE ENGINE BLOCK, FOUND BOLT HEAD WITH ABOUT 1" OF THREADS LAYING ON TOP OF LOWER ENGINE COVER.
Engine, May 14, 2015
I HAVE 77,000 MILES ON THIS CAR AND THE WATER PUMP HAS BECOME DEFECTIVE AS I BEGAN TO SEACH ONLINE ABOUT THIS ISSUE I SEE THERE ARE THOUSANDS OF COMPLAINT ABOUT THE SAME YEAR AND MODEL OF MY CAR I BELEIVE THIS PART SHOULD BE RECALLED
Other or unspecified, Engine, Apr 19, 2015
FRONT TWO VALVE COVER BOLTS SHEERED OFF CAUSING OIL TO LEAK DIRECTLY ON THE EXHAUST. *TR
Engine, Jan 26, 2015
PLEASE WITHDRAW THE RECENTLY FILED COMPLAINT CONCERNING THIS 2006 BMW FROM YOUR RECORDS. THE CONFIRMATION NUMBER (ODI NUMBER) IS: 10678988. FURTHER RESEARCH HAS INDICATED THAT THE INFORMATION IN THE COMPLAINT WAS OBTAINED FROM AN INACCURATE SOURCE. THEREFORE, THE COMPLAINT IS BEING WITHDRAWN. THANK YOU FOR YOUR CONSIDERATION IN THIS MATTER. *TR
Engine, Jan 26, 2015
BROKEN CYLINDER HEAD BOLT NEAR OIL FILTER HOSING FOUND THIS TO BE A VERY VERY COMMON PROBLEM WITH (N52) ENGINES. *TR
Structure, Engine, Jan 26, 2015
THERE IS A CLEAR MANUFACTURING DEFECT CONCERNING THE ALUMINUM SCREWS ASSOCIATED WITH THE VALVE COVER GASKET AND THE ALUMINUM HEAD BOLTS ON 2006 BMW 325I'S. THE NHTSA HAS RECEIVED MANY COMPLAINTS REGARDING THIS DEFECT. THE ALUMINUM SCREWS/BOLTS HAVE BEEN REDESIGNED SINCE DISCOVERING THIS MANUFACTURING DEFECT. BMWNA HAVE HAD NUMEROUS SERVICE ISSUES RELATED TO THESE DEFECTIVE ALUMINUM SCREWS/BOLTS. THEY HAVE OPENLY ADMITTED THAT THE SCREWS/BOLTS IN QUESTION WERE DEFECTIVE IN NATURE AND PRODUCTION, AND THAT THE SCREWS/BOLTS HAVE BEEN REDESIGNED TO AVOID FUTURE FAILURES. SOME OF THESE COMPLAINTS INCLUDED, AND RESULTED IN, VEHICLES LEAKING OIL IN THE ENGINE AREA, POTENTIALLY CAUSING FIRES IN THE VEHICLE. THE DEFECTIVE SCREWS/BOLTS POSE A SERIOUS POTENTIAL RISK TO THE SAFETY OF THE OWNERS OF THESE VEHICLES, AS WELL AS TO OTHER DRIVERS WHO SHARE THE ROADWAY WITH THEM. IT IS MY STRONG BELIEF THAT THIS PUBLIC SAFETY RISK CANNOT GO ON ANY FURTHER WITHOUT PROPER INTERVENTION FROM THE GOVERNMENTAL AGENCIES WE EMPLOY AS TAXPAYERS. I RESPECTFULLY REQUEST THAT BMWNA ISSUE A VOLUNTARY RECALL OF THE BMW 2006 325I'S AFFECTED BY THIS MANUFACTURING DEFECT. IF BMWNA DECLINES TO ISSUE A VOLUNTARY RECALL, I RESPECTFULLY REQUEST THAT THE NHTSA ISSUE A MANDATORY RECALL FOR THIS DEFECT. I HAVE LEARNED THAT BMW OF NORTH AMERICA IS AWARE OF THE DEFECTIVE ALUMINUM SCREWS/BOLTS, AND HAS ISSUED AN INTERNAL "TECHNICAL SERVICE BULLETIN" (TSB) TO FOREWARN DEALERSHIPS OF THIS MANUFACTURING DEFECT, AND THE STEPS TO REMEDY THE ISSUE. I HAVE DILIGENTLY MAINTAINED MY VEHICLE AS PRESCRIBED BY THE SERVICE MANUALS, AS WELL AS THE ON BOARD COMPUTER IN THE VEHICLE. MY CONTENTION IS EXTREMELY CLEAR; THE ALUMINUM BOLTS ARE A MANUFACTURING DEFECT AND SHOULD BE FIXED AT NO COST TO THE CONSUMER! *TR
Engine, Jan 13, 2015
ONE OF MY VALVE COVER BOLTS BROKE CAUSING THE OIL TO LEAK EVERYWHERE. *TR
Engine, Dec 28, 2014
I HIT A BUMP IN THE ROAD, COMPLEMENTS OF MOONACHIE, NEW JERSEY ROUTE 120, NEW JERSEY HAS THE WORST ROADS IN THE COUNTRY AND ONE OF THE HIGHEST TAXES TOO. I HAD AN AUTO PARTS PLACE THAT SOLD ME 2-STRUTS-2 SHOCKS, WHICH THE ROADS RIPPED APART ON MY CAR TELL ME, HE'D BE OUT OF BUSINESS IF IT WASN'T FOR NEW JERSEY. AFTER I HIT THE CRATER IN THE ROAD I FELT A LOUD RATTLE BUMPING SOUND WHEN I SLOWED DOWNED AND ACCELERATED, THE ENGINE NEVER REALLY IDLED RIGHT AFTERWARDS. I HAD A FRIEND LOOK AT THE CAR AND HE TOLD ME ALL FOUR BOLTS CONNECTED TO THE MOTOR MOUNTS, ALL OF THE BOLTS SEPARATED AND BROKE OFF IN THE ENGINE, THEY SNAPPED OFF COMPLETELY AND BROKE THE MOTOR MOUNTS AS WELL. I HEAR FROM READING ON THIS SITE THE BOLTS WERE A MANUFACTURES REJECT, FAULTY BOLTS. THAT BEING SAID , I WISH I COULD LITIGATE AGAINST BMW FOR USING THE BOLTS AND THE STATE OF NEW JERSEY FOR NOT PROPERLY CARING FOR THE ROADS AND LEAVING HAZARDOUS CONDITIONS ON THE ROADS WHICH I MIGHT ADD BE FATAL FOR SOME UNFORTUNATE PERSON. VISIT HOBOKEN , NEW JERSEY AND CHECK OUT THEIR MAIN STREET, WASHINGTON, THE ROADS IN NEWARK, NEW JERSEY ARE MUCH BETTER THAN THERE.COULD NEW JERSEY'S POLITICIANS BE STEALING THIS MONEY SET ASIDE FOR ROAD REPAIR? NAH, OF COURSE NOT, IN NEW JERSEY? *TR
Engine and engine cooling, Nov 18, 2014
COOLANT LEAKING FROM RESERVOIR TANK. A COMMON ISSUE AMONG BMWS- AND IS CURRENTLY EFFECTING MY 330XI 2006. THE EXPANSION TANK IS FAULTY AND WONDERING IF THE TANK AND HOSES ARE TESTED TO EVEN WITHSTAND THE "BMW BRAND" NAME COOLANT. *TR
Engine, Oct 8, 2014
ENGINE VALVE COVER HEAD BOLTS SNAPPED. QTY. 3. *TR
Engine, Oct 2, 2014
A BOLT BROKE ON THE VALVE COVER. IT'S NOT FROM COLD WEATHER OR LACK OF MAINTENANCE, IT'S CLEARLY A MANUFACTURER DEFAULT. WHEN ADVISED BY VALLEY BMW IN MODESTO I LEARNED THIS HAPPENS IN MOST OF THESE MODELS THAT YEAR. IT'S FROM OVER TORQUING THE BOLT OR A FAULTY BOLT OR SOMETHING ELSE BUT IT'S CLEARLY NOT THE FAULT OF THE CONSUMER. MINE BROKE ON THE PASSENGER SIDE AND IT CAUSES THE OIL TO LEAK ON THE EXHAUST. THIS IS A SAFETY ISSUE AND MUST BE ADDRESSED IMMEDIATELY. THIS ALSO HAPPENS ON THE OIL PAN! HTTP://MSAUCEDA1.BLOGSPOT.COM/2013/07/BMW-330I-2006-BROKEN-BOLTS-VALVE-COVER.HTML IT COSTS OVER $1000 TO FIX AND AFTER RESEARCHING FURTHER, I FOUND THIS IS HAPPENING A LOT AND MANY CONSUMERS AS WELL AS REPAIR SERVICES ARE FRUSTRATED AND UNDERSTANDABLY ANGRY. PLEASE ADDRESS THIS AND MAKE BMW RECALL THESE VEHICLES FOR REPAIR BEFORE SOMEONE GETS KILLED! HTTPS://WWW.YOUTUBE.COM/WATCH?V=5CO92U-WA94. *TR
Engine, Sep 4, 2014
TL* THE CONTACT OWNS A 2006 BMW 330I. THE CONTACT STATED THAT FUEL WAS LEAKING FROM THE OIL FILTER HOUSING. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC. THE TECHNICIAN DIAGNOSED THAT THE BALL COVER GASKET NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 87,243.
Air bags, Engine, Aug 20, 2014
TL* THE CONTACT OWNS A 2006 BMW 330I. THE CONTACT STATED THE PASSENGER AIR BAG SENSOR ILLUMINATED ON THE INSTRUMENT PANEL. THE CONTACT MENTIONED THAT THE FAILURE PERSISTED EVEN WHEN THE SEAT WAS NOT OCCUPIED. THE DEALER STATED THE FRONT PASSENGER SEAT OCCUPANT SENSOR NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED. THE FAILURE MILEAGE WAS 70,000. UPDATED 10/29/14*LJ UPDATED 4/23/15 *JS
Engine, Aug 13, 2014
MY WIFE OWN A 2006 BMW 325I, WE BOUGHT IT NEW, AND SINCE DAY ONE WE COMPLAINT TO OUR DEALER THAT THE ENGINE KNOCKS. WE WERE TOLD THAT THEY HAD SIMILAR COMPLAINTS BUT CAN'T FIX THE PROBLEM. THUS, THEY GIVEN US A PAMPHLET ON HOW TO START THE CAR IN THE MORNING. OVER, THE YEARS I HAVE TAKEN IT BACK TO THE DEALER BUT TO NO AVAIL. WE PURCHASED OUR CAR AT BMW OF TOWNSON AND DO ALL OF OUR SERVICES AT RUSSELL BMW. BOTH DEALERS ARE IN THE STATE OF MARYLAND. THEY DO HAVE ALL THE RECORDS OF OUR SERVICES AND COMPLAINT PERTAIN TO ENGINE KNOCKS. RECENTLY, THERE ARE LOTS OF RECALLS WHICH INITIALLY CAR MAKERS WOULD NOT VOLUNTARY DO IT UNTIL IT IS SCRUTINIZE BY NHTSA. I WONDER IF YOU WOULD LOOK INTO THIS ISSUE. THANK YOU VERY MUCH FOR YOUR TIME AND ATTENTION. I CAN BE REACH AT [XXX] OR MY CELL [XXX]. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
Engine, Apr 17, 2014
BMW NA HAS ISSUED A RECALL TO ADDRESS BROKEN HEAD BOLTS IN A NUMBER OF 2010 MODELS, WHICH CAN RESULT IN ENGINE FAILURE. I HAVE SPOKEN WITH SEVERAL BMW OWNERS AND FOUND THAT THIS ISSUE EXTENDS BEYOND THEIR INITIAL RECALL INTO EARLIER MODELS, BUT BMW NA IS IGNORING THE ISSUE OUTRIGHT IN THE HOPES THAT IT WILL DISAPPEAR. I HAVE SPOKEN WITH BMW NA SEVERAL TIMES AND THEY HAVE GIVEN ME THE RUNAROUND FOR SEVERAL MONTHS AND PUT MAJOR SMOKESCREENS UP IN MY ATTEMPT FURTHER THE CONVERSATION/INVESTIGATION OF THE ISSUE. I'M REACHING OUT TO NHTSA BECAUSE I HAVE NO OTHER RECOURSE AND I KNOW THIS ISSUE IS NOT A LOCALIZED ISSUE WITH ONE YEAR MODEL, BUT SYMPTOMATIC OF SEVERAL YEARS AND MODELS. PLEASE HELP THE DRIVING PUBLIC BY ASSISTING ME IN ADDRESSING THIS ISSUE WITH BMW.
Engine, Apr 15, 2014
THERE IS A CLEAR MANUFACTURER DEFECT CONCERNING THE ALUMINUM BOLTS ASSOCIATED WITH THE VALVE COVER GASKET ON THE BMW 2006 325I'S. WITH RESEARCH THAT I HAVE BEEN DOING FROM OTHERS, I NOTICED THAT THIS IS A MANUFACTURE DEFECT AND BMW DOES KNOW ABOUT THE PROBLEM. THIS CAN BE A SAFETY CONCERN IF NOT CORRECTED QUICK DUE TO THE POSSIBILITY OF OIL FALLING ON TOP OF THE EXHAUST PIPE AND MAY CAUSE A FIRE.THE DEFECTIVE BOLTS POSE A SERIOUS POTENTIAL RISK TO THE SAFETY OF THE OWNERS OF THESE VEHICLES, AS WELL AS TO OTHER DRIVERS WHO SHARE THE ROADWAY WITH THEM. I RESPECTFULLY REQUEST THAT BMW NORTH AMERICA ISSUE A VOLUNTARY RECALL OF THE BMW 2006 325I'S AFFECTED BY THIS MANUFACTURER DEFECT. I AM NOT PRIVY TO WHAT CONSTITUTES A VEHICLE'S DEFECTIVE COMPONENTS TO REACH A "RECALL STATUS". *TT
Engine, Apr 3, 2014
I AM THE ORIGINAL OWNER OF 2006 325I WITH 42,000 MILES. ON JANUARY, THE CAR SUDDENLY ALARMED WARNING SIGNS ON CA HIGHWAY #5 AND STARTED TO MAKE LOUD NOISE AND SHAKINGS. AT THAT TIME, I WAS PREGNANT AND WITH MY 2 YEAR OLD BABY ON BACK SEAT. THE SITUATION WAS HAPPENING ON THE HIGHWAY! I WAS SO WORRIED ABOUT DRIVING SAFETY. TO SOLVE THE PROBLEM, THE DEALER SHOP ASKED ME TO REPLACE HEAD GASKET ALUMINUM VOLT AND HOUSING GASKET. IT DID COST OVER $4000. DURING THE REPAIR, THE TECHNICIAN SAID THAT THE PROBLEM IS COMMON ON THIS MODEL. I RESEARCHED ABOUT THIS PROBLEM AND READ MANY COMPLAINTS ABOUT SAME ISSUES FROM BMW 2006 325I OWNERS. THE OWNERS AGREE THAT THE HEAD GASKET ALUMINUM VOLT AND HOUSING GASKET ISSUE RESULT IN MANUFACTURE DEFECTS. LATER, BMW CHANGED THE VOLT MATERIALS AND PROVIDED GOOD WILL REPAIRS FOR SOME OWNERS. I STRONGLY ASSUME THAT THIS IS ONE OF MANUFACTURE DEFECTS COST CUSTOMERS TO REPAIR AS WELL AS THREATEN DRIVERS? SAFETY. SO I CALLED BMW CUSTOMER RELATION. BUT THEY SAID THAT ?KEEP THE RECEIPT AND YOU MAY GET REFUND WHEN ?THERE ARE ENOUGH PEOPLE COMPLAIN ABOUT IT???YOU ARE MORE THAN WELCOME TO REPORT THIS PROBLEM TO NHTSA?.? I ASKED ABOUT HOW MANY CUSTOMERS HAD SAME PROBLEMS. BUT THEY SAID "DO NOT KNOW". BASED ON THEIR RESPONSE, IT SEEMS THAT THEY KNEW AND UNDERSTOOD IT IS MANUFACTURE DEFECTS, BUT DO NOT CARE UNTIL THE ISSUE IS LOUSY OR HANDLED WITH POWERFUL AUTHORITY. IT IS THREATENING DRIVING SAFETY OF NOT ONLY THE OWNERS BUT ALL OTHER DRIVERS ON HIGHWAYS BECAUSE IT DOES NOT GIVE ANY SIGNS BEFORE BROKEN ON HIGHWAY. THEREFORE, I AM REPORTING THIS ISSUE WHILE HOPING THAT NO OTHER DRIVERS OR BABIES GET HURTS FROM THIS SUDDEN DEFECTS AND YOU COULD DO INVESTIGATE IT IN DEPTH SO THAT YOU COULD PROTECT ALL OTHER DRIVERS? LIFE. *TR