2022 Can-am Ryker
Problems, recalls and owner-reported issues
Steering is the leading concern among 33 owner complaints filed for this model year. This is the 3rd highest complaint count among 6 Ryker model years with reports.
Of the 2022 reports, 4 involved a crash. 2 people were injured.
What owners report most often
Recalls and investigations
Fuel system, gasoline, delivery, fuel pumpDec 15, 2023
Bombardier Recreational Products, Inc. (Bombardier) is recalling certain 2019-2023 Can-Am Ryker motorcycles. The impeller may swell, causing the high-pressure fuel pump to fail.
A fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Dealers will inspect and replace the fuel pump as necessary, free of charge. Owner notification letters were mailed February 27, 2024. Owners may contact Bombardier customer service at 1-888-272-9222. Bombardier's number for this recall is Bulletin 2023-10.
Campaign 23V855000 on NHTSA.gov
Exterior lighting, brake lightsMar 17, 2023
Bombardier Recreational Products, Inc. (BRP) is recalling certain 2020-2023 Spyder RT and 2022-2023 Ryker motorcycles. The brake lights may stay illuminated even if the brake pedal is not pressed. As such, these motorcycles fail to comply with Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and associated Equipment."
Brake lights that remain illuminated can fail to alert other motorists of the rider's intention and increase the risk of a crash.
Depending on the model, dealers will replace the brake light switch, adjust the brake light switch, and/or add a spring to the brake light switch, as necessary, free of charge. Owner notification letters were mailed March 17, 2023. Owners may contact BRP Customer Service at 1-888-272-9222. BRP's number for this recall is 2023-6.
Campaign 23V175000 on NHTSA.gov
Electrical system, wiringOct 22, 2022
Bombardier Recreational Products (BRP) is recalling certain 2019-2023 Ryker motorcycles. The position light and flasher electrical harnesses in the front fenders may loosen and rub on the tire, leading to a short circuit and resulting in an engine stall while driving.
An engine stall while driving increases the risk of a crash.
Dealers will secure the two harnesses, free of charge. Owner notification letters were mailed December 9, 2022. Owners may contact Bombardier customer service at 1-888-272-9222.
Campaign 22V799000 on NHTSA.gov
Steering, steering wheel/handle barDo not drive until repairedJul 13, 2022
Bombardier Recreational Products Inc. (BRP) is recalling certain 2022 Can-Am Ryker motorcycles. The handlebar stem bolt may break unexpectedly due to insufficient thread length.
A broken handlebar stem bolt can cause a sudden loss of steering control, increasing the risk of a crash.
Owners are advised to not ride their motorcycle until the remedy is complete. Dealers will clean the threads of the steering column and install a new steering stem bolt, free of charge. Owner notification letters were mailed July 14, 2022. Owners may contact BRP customer service at 1-888-272-9222. BRP's number for this recall is 2022-16.
Campaign 22V503000 on NHTSA.gov
Representative owner complaints: engine
3 reports, newest first. Show all
Suspension, Service brakes, Engine, Feb 13, 2023
I had a VSS Fault and engine power cut off while coming in a left turn. Rear tire became wobbly and almost threw me off. Bike went to limp mode and slowed down. Had engine codes C006C and C0063 which are common problems with the steering and engine going to limp mode
Steering, Electrical system, Engine, Oct 10, 2022
Rear uncontrollable shaking, swaying on slow low 40mph gradual cornering. Caused VSS Limp mode fault. Codes C0063 and C006C. Almost lost control of the Ryker, Seems traction control or the yaw sensor is intermittently active when cornering. This time it went into limp mode.
Vehicle speed control, Engine, Sep 16, 2022
This motorcycle continues to go into "Limp Mode". This has happened now two times with no explanation from the manufacture as to why. The bike will lose engine power and immediately drop to speeds no higher than 55mph. This was advised to dealer and they were very familiar with this, and initially told me the repairs were denied by BRP, but that they covered the issue and fixed it. Less than 1 week later, the same thing happened. The check engine light comes on and the gauges read VSS Fault, Limp Mode. This is very unsafe as there is no explanation as to why this happens and engine power is loss at any given moment. I fear riding the bike on the freeway at high speeds and this happening and potentially causing me to be hit by another vehicle from the immediate loss of power. This is a well known issue and I don't feel this bike is safe for the road.