2022 Can-am Ryker

Problems, recalls and owner-reported issues

Steering is the leading concern among 33 owner complaints filed for this model year. This is the 3rd highest complaint count among 6 Ryker model years with reports.

Complaints by model year
  1. 33

Of the 2022 reports, 4 involved a crash. 2 people were injured.

Primary concernSteering17 reports · 52% of complaints
Owner complaints33Filed with NHTSA
Recall relationship4 safety recallsNHTSA campaign records

What owners report most often

  1. Steering17
  2. Other or unspecified7
  3. Electrical system6
  4. Suspension6
  5. Service brakes5
  6. Vehicle speed control5
  7. Engine3
  8. Power train3

Recalls and investigations

  1. Fuel system, gasoline, delivery, fuel pumpDec 15, 2023

    Bombardier Recreational Products, Inc. (Bombardier) is recalling certain 2019-2023 Can-Am Ryker motorcycles. The impeller may swell, causing the high-pressure fuel pump to fail.

    A fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.

    Dealers will inspect and replace the fuel pump as necessary, free of charge. Owner notification letters were mailed February 27, 2024. Owners may contact Bombardier customer service at 1-888-272-9222. Bombardier's number for this recall is Bulletin 2023-10.

    Campaign 23V855000 on NHTSA.gov

  2. Exterior lighting, brake lightsMar 17, 2023

    Bombardier Recreational Products, Inc. (BRP) is recalling certain 2020-2023 Spyder RT and 2022-2023 Ryker motorcycles. The brake lights may stay illuminated even if the brake pedal is not pressed. As such, these motorcycles fail to comply with Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and associated Equipment."

    Brake lights that remain illuminated can fail to alert other motorists of the rider's intention and increase the risk of a crash.

    Depending on the model, dealers will replace the brake light switch, adjust the brake light switch, and/or add a spring to the brake light switch, as necessary, free of charge. Owner notification letters were mailed March 17, 2023. Owners may contact BRP Customer Service at 1-888-272-9222. BRP's number for this recall is 2023-6.

    Campaign 23V175000 on NHTSA.gov

  3. Electrical system, wiringOct 22, 2022

    Bombardier Recreational Products (BRP) is recalling certain 2019-2023 Ryker motorcycles. The position light and flasher electrical harnesses in the front fenders may loosen and rub on the tire, leading to a short circuit and resulting in an engine stall while driving.

    An engine stall while driving increases the risk of a crash.

    Dealers will secure the two harnesses, free of charge. Owner notification letters were mailed December 9, 2022. Owners may contact Bombardier customer service at 1-888-272-9222.

    Campaign 22V799000 on NHTSA.gov

  4. Steering, steering wheel/handle barDo not drive until repairedJul 13, 2022

    Bombardier Recreational Products Inc. (BRP) is recalling certain 2022 Can-Am Ryker motorcycles. The handlebar stem bolt may break unexpectedly due to insufficient thread length.

    A broken handlebar stem bolt can cause a sudden loss of steering control, increasing the risk of a crash.

    Owners are advised to not ride their motorcycle until the remedy is complete. Dealers will clean the threads of the steering column and install a new steering stem bolt, free of charge. Owner notification letters were mailed July 14, 2022. Owners may contact BRP customer service at 1-888-272-9222. BRP's number for this recall is 2022-16.

    Campaign 22V503000 on NHTSA.gov

Representative owner complaints: suspension

6 reports, newest first. Show all

  1. Steering, Suspension, Other or unspecified, May 27, 2025

    When entering a left hand turn at moderate speed, the vehicle will go into a lurching, bucking, hesitation period, usually when under slight or moderate acceleration. This results in an uncontrolled wobble that will eventually smooth out but can also result in a sudden burst of power that tends to rapidly propel the vehicle further to the left unless the throttle is quickly relaxed. Hard to describe, but the sensation feels like you are being “squirted” out of the turn. I first noticed this barely a month after I took possession of the machine and thought it might be a normal handling trait. As I became more acquainted with the various user’s groups, I find it was not normal and a much more serious problem that apparently hasn’t been successfully addressed by the manufacturer over the years it has been reported. Unlike some of the others who have reported similar occurrences, my vehicle has not displayed any error codes on the display screen, nor has it gone into a limp mode. Due to these conditions, I will not take this vehicle on any road trips for fear of being stranded or involved in an accident being caused by this dangerous handling anomaly. I love this vehicle, but due to this issue, I don’t feel it is safe.

  2. Steering, Suspension, Other or unspecified, Sep 14, 2024

    Vehicle repeatedly goes in to limp mode for VSS faults related to steering codes. Dealers are unable to repair and report that many other of the same model have the same problem. Many other owners in the online community report the same issue with no fix in sight. The vehicle is essentially unusable and the manufacturer does not appear to have any intent to remedy the situation.

  3. Steering, Suspension, Service brakes, Aug 6, 2023, crash

    I have a 2022 Can-Am Ryker 900 sport. when I purchased it around a week or two later, my left brake and wheel started squeaking loud. I returned it to the dealer. One of the service men said its brand new brakes and tires give it time to wear down.low brake warning came across the screen and my handlebars started feeling loose,a lot of play. I returned it again. They checked my handlebars and fixed my front truck and said my brand new brakes were fine. It wasn’t my handlebars. It was my suspension starting to malfunction making my left brake pad wear uneven low brake warning came across again. I returned it again for the recalls the service man assured me this will fix my problem. last night August 5,2023 I was out, riding with friends, proceeded into a curve, and my handlebars would not allow me to turn my wheels. My left wheel seemed as though it was trying to lock up. I could not turn the curve.it started to do what they call the Death turn. Two of my friends almost ran into the back of me because the bike slowed itself down, My check engine light started flashing VVS fault code came across the screen, I end up hitting the curb scratching my rim, and now the bike is on limp mode.

  4. Suspension, Service brakes, Engine, Feb 13, 2023

    I had a VSS Fault and engine power cut off while coming in a left turn. Rear tire became wobbly and almost threw me off. Bike went to limp mode and slowed down. Had engine codes C006C and C0063 which are common problems with the steering and engine going to limp mode

  5. Steering, Suspension, Other or unspecified, Jan 6, 2023

    I purchased my Ryker in June of 2022. Since my purchase I have been dealing with a death wobble in the front during left turns, a serious wobble in the rear during left turns, and continuous vss fault/Limp home mode failure. I reported the issue to the dealer and they attempted to correct the issue, but it has continued to fail. I contacted BRP the parent company, and they refused to respond. There have been 2 safety recalls and I am no longer feeling safe to ride the vehicle.

  6. Suspension, Other or unspecified, Oct 11, 2022

    I got a VSS fault code (C0063) that sent my Ryker into a limp home mode which greatly reduced the speed at which I could travel. This code indicates a problem reported from the yaw sensor. Had I been on an Interstate highway, this could have possibly been a serious situation. I was about 10 miles from home but made it home safely. This fault code seems to be a recurring problem to many Ryker owners and I feel that BRP should either make a new sensor, eliminate it completely or look at the overall design of the vehicle to possibly discover a flaw in the frame, etc. This code can only be removed by taking the vehicle to a reputable dealer that has the proper equipment to do it and unfortunately these dealers are few and far between. The closest one to me is 50 miles.