2007 Ford Escape

Problems, recalls and owner-reported issues

Service brakes is the leading concern among 393 owner complaints filed for this model year. This is the 20th highest complaint count among 26 Escape model years with reports.

Complaints by model year
  1. 393

Of the 2007 reports, 16 involved a crash and 3 involved a fire. 9 people were injured and 2 people died.

Primary concernService brakes103 reports · 26% of complaints
Owner complaints393Filed with NHTSA
Recall relationship4 safety recallsNHTSA campaign records

What owners report most often

  1. Service brakes103
  2. Power train59
  3. Engine54
  4. Electrical system50
  5. Vehicle speed control44
  6. Hydraulic32
  7. Steering28
  8. Suspension21

Recalls and investigations

  1. Power train, automatic transmission, lever and linkage, floor shiftSep 29, 2015

    Ford Motor Company (Ford) is recalling certain model year 2001-2008 Ford Escape and Mercury Mariner vehicles manufactured March 31, 2001, to September 1, 2009. The affected vehicles are equipped with either a 2.3L or 3.0L engine and have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning.

    If the shift lever disengages from the transmission, a driver may be unable to shift gear positions and the indicated shift position may not represent the gear position the vehicle is in. Should a disengagement occur while the vehicle is being driven, when the driver goes to stop and park the vehicle, the gear selection indicator may show that the transmission is in the "PARK" position, but the vehicle transmission may not actually be in the "PARK" gear position. If the vehicle is not in the "PARK" position there is a risk the vehicle will roll away as the driver and other occupants exit the vehicle or anytime thereafter. A vehicle rollaway increases the risk of injury to exiting occupants and bystanders.

    Ford will notify owners, and dealers will inspect the transmissions and either tighten the manual shift lever bolt or replace the manual shift lever assembly. These repairs will be performed free of charge. The recall began on October 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S28.

    Campaign 15V606000 on NHTSA.gov

  2. Suspension, front, wheel bearingJun 3, 2015

    The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.

    Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.

    Timken has begun notifying distributors who will offer purchasers replacement wheel bearings, free of charge. The recall began on May 21, 2015. Owners may contact Timken customer service at 1-866-984-6536.

    Campaign 15E045000 on NHTSA.gov

  3. Hybrid propulsion systemSep 3, 2014

    Ford Motor Company (Ford) is recalling certain model year 2005-2008 Ford Escape hybrid electric vehicles manufactured October 13, 2003, to June 20, 2008, and 2006-2008 Mercury Mariner hybrid electric vehicles manufactured June 10, 2005, to June 20, 2008. The coolant pump for the hybrid system may fail resulting in the hybrid electronics overheating.

    If the hybrid electronics system overheats, it may shut down the powertrain, resulting in a stall-like condition, increasing the risk of a crash.

    Ford will notify owners, and dealers will inspect and replace the original Motor Electronics Coolant (MEC) Pump with an improved brushless pump, free of charge. The recall is expected to begin on October 27, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S19.

    Campaign 14V526000 on NHTSA.gov

  4. EquipmentSep 3, 2010

    MARATHON IS RECALLING CERTAIN SEAT COVERS, BRAND SUPERHIDES WITH PART NUMBERS 593, 594, 578, 960, 228, 228-09, 267-08, 333, 625, AND 630, SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE SEAT COVERS ARE MADE OF HEAVIER THREAD AND ARE NOT COMPATIBLE WITH SEATS CONTAINING SIDE AIRBAGS. THE HEAVIER SEAT COVER COULD INTERFERE WITH FULL DEPLOYMENT OF THE AIRBAG IN THE EVENT OF A CRASH.

    AN IMPROPERLY DEPLOYED AIRBAG COULD RESULT IN SERIOUS INJURY.

    MARATHON WILL NOTIFY OWNERS OF RECORD AND REPLACE THE SEAT COVER FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 14, 2010. OWNERS MAY CONTACT MARATHON AT 1-800-735-2769.

    Campaign 10E043000 on NHTSA.gov

Representative owner complaints: service brakes

102 reports, newest first. Show all

  1. Service brakes, Hydraulic, Feb 5, 2007

    TL* - THE CONTACT CALLED REGARDING A 2006 FORD ESCAPE HYBRID. THE CONTACT WAS TRAVELING AT 60 MPH WHEN THERE WAS A COMPLETE BRAKE FAILURE. THE ROAD CONDITIONS WERE DRY. THE ABS LIGHT AND THE BRAKE LIGHT TURNED ON. THE CONTACT STATED THAT HE APPLIED GREAT FORCE TO THE BRAKE PEDAL AND THE BRAKES WOULD NOT STOP THE VEHICLE. HE ENGAGED THE EMERGENCY BRAKE. THE VEHICLE FISHTAILED, AND HE HAD TO DRIVE INTO THE MEDIAN TO AVOID HITTING OTHER VEHICLES. THE VEHICLE EVENTUALLY STOPPED. THE CONTACT HAD THE VEHICLE TOWED TO HIS HOME. *AK UPDATED 2/22/2007- THE DEALER DETERMINED THAT THE BRAKE MODULE FAILED. *NM

  2. Service brakes, Hydraulic, Dec 6, 2006

    DT*: THE CONTACT STATED THE BRAKES HAD FAILED ON FOUR SEPARATE OCCASIONS. EACH TIME, THE VEHICLE WAS RETURNED TO THE SALES/SERVICE DEALER. THE RIGHT BRAKE SENSOR WAS REPLACED THE FIRST TIME. ON THE 2ND VISIT, THE MASTER COMPUTER SWITCH WAS REPLACED. ON THE 3RD VISIT, ALL SENSORS WERE REPLACED. ALSO, WHILE TRAVELING 22 MPH, THE BRAKES FAILED FOR THE 4TH TIME. ALL SENSORS, MASTER CYLINDER AND ELECTRICAL SYSTEM OF THE BRAKES WERE REPLACED, BUT THE BRAKES STILL FAILED TO WORK PROPERLY. THE MANUFACTURER WAS NOTIFIED.*AK