2013 Ford Focus
Problems, recalls and owner-reported issues
Power train is the leading concern among 2,112 owner complaints filed for this model year. This is the 4th highest complaint count among 19 Focus model years with reports.
Of the 2013 reports, 49 involved a crash and 12 involved a fire. 28 people were injured and 3 people died.
What owners report most often
Recalls and investigations
Fuel system, gasoline, storage, evaporative emissions, canisterJun 9, 2026
Ford Motor Company (Ford) is recalling certain 2012-2018 Focus vehicles previously repaired incorrectly under recall number 18V735. The Canister Purge Valve (CPV) may malfunction, causing the engine to stall unexpectedly while driving.
An engine that stalls while driving increases the risk of a crash.
Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed July 29, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S40. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Campaign 26V369000 on NHTSA.gov
Equipment, electrical, engine block heaterJan 15, 2026
Ford Motor Company (Ford) is recalling certain 2013-2018 Focus, 2013-2019 Escape, and 2015-2016 MKC vehicles equipped with a 2.0L engine. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
An electrical short circuit can increase the risk of a fire.
Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed March 6, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S01. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026.
Campaign 26V011000 on NHTSA.gov
Latches/locks/linkages, doors, latchJun 8, 2020
Ford Motor Company (Ford) is recalling certain 2011-2014 Fiesta, 2013-2014 Fusion, 2015 Mustang, 2013-2015 Escape and C-Max, 2012-2015 Focus, 2014-2016 Transit Connect, 2013-2014 Lincoln MKZ, and 2015 MKC vehicles. These vehicles were previously recalled and repaired under recalls 15V-246, 16V-643 or 17V-210, however the repair may not have been completed properly. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Ford will notify owners, and dealers will inspect the latch date codes to confirm if the repair was done correctly, and replace the side door latches if necessary, free of charge. Owners will also have the option to inspect their own vehicle's door latches and enter the date codes into a website to determine if the latches are correct. Owner notification letters were mailed on July 27, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S30.
Campaign 20V331000 on NHTSA.gov
Fuel system, gasoline, storageJul 5, 2019
Ford Motor Company (Ford) is recalling certain 2012 and 2017 Focus vehicles equipped with 2.0L GDI gasoline engines and 2013-2014 Focus ST vehicles equipped with 2.0L GTDI engines, previously recalled under 18V-735. The affected vehicles did not have the Powertrain Control Module (PCM) updated as intended. Therefore, the Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in the fuel vapor management system.
The excessive vacuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began July 29, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S22.
Campaign 19V515000 on NHTSA.gov
Fuel system, gasoline, storageOct 22, 2018
Ford Motor Company (Ford) is recalling certain 2012-2018 Ford Focus vehicles with a 2.0L GDI or 2.0L GTDI engine. The Canister Purge Valve (CPV) may malfunction, possibly causing excessive vacuum in fuel vapor management system.
The excessive vaccuum may result in an engine stall while driving, without warning and without the ability to restart the vehicle, increasing the risk of a crash.
Ford will notify owners, and dealers will reprogram the Powertrain Control Module. Dealers will also check for fault codes and replace the CPV as needed. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. The recall began August 19, 2019. Owners may contact Ford Customer service at 1-866-436-7332. Ford's number for this recall is 18S32. Note: Until the vehicle is serviced for this concern, owners are advised to keep the fuel tank at least halfway full.
Campaign 18V735000 on NHTSA.gov
Latches/locks/linkages, hatchback/liftgate, lockSep 28, 2016
Ford Motor Company (Ford) is recalling certain model year 2013-2017 Ford Focus hatchback vehicles manufactured February 14, 2012, to August 26, 2016 and equipped with a manual transmission. The hatchback of the affected vehicles may be unlatched with a single press of the interior latch release button. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
With only a single press needed, the driver may accidently unlatch the hatchback, increasing the risk of injury to any unsecured passengers in the back.
Ford will notify owners, and dealers will reprogram the Body Control Module with updated software, free of charge. The recall began February 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16C13.
Campaign 16V698000 on NHTSA.gov
Latches/locks/linkages, doors, latchSep 6, 2016
Ford Motor Company (Ford) is recalling certain model year 2012-2015 Ford Focus, 2013-2015 Ford Escape and Ford C-MAX, 2015 Lincoln MKC and Ford Mustang, and 2014-2016 Ford Transit Connect vehicles. A component within the door latches may break, preventing the doors from latching and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Ford will notify owners, and dealers will replace the door latches with an improved part, free of charge. The recall began on January 27, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S30.
Campaign 16V643000 on NHTSA.gov
Electrical system, wiringDec 2, 2015
Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM).
The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.
Ford will notify owners, and dealers will replace the current crimped splices with new splices, free of charge. The recall began on January 7, 2016. Owners may contact Ford customer service 1-866-436-7332. Ford's number for this recall is 14S17-S1.
Campaign 15V813000 on NHTSA.gov
Electrical system, wiringAug 11, 2014
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Escape vehicles manufactured October 5, 2011, to April 1, 2013, and equipped with 2.0 liter engines and Focus ST vehicles manufactured February 14, 2012, to October 14, 2013, and equipped with 2.0 liter engines. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM).
The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.
Ford will notify owners, and dealers will replace the current crimped splices with new splices, free of charge. The recall began in October 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S17.
Campaign 14V495000 on NHTSA.gov
Exterior lightingAug 1, 2013
Ford is recalling certain model year 2012-2013 Focus BEV vehicles equipped with High Intensity Discharge (HID) headlights, manufactured September 15, 2011, through May 6, 2013; and model year 2013 Focus ST vehicles equipped with High Intensity Discharge (HID) headlights, manufactured February 16, 2012, through May 7, 2013. Due to a wiring incompatability, the front side marker lamps may not function. Thus, these vehicles fail to comply to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."
Without the proper illumination of the side maker lamps, the vehicle may be less visible in night time conditions, increasing the risk of a crash.
Ford will notify owners, and dealers will modify the headlamp assembly wiring, free of charge. The recall began on August 16, 2013. Owners may contact the Ford customer relationship center at 1-866-436-7332. Ford's recall number is 13C04.
Campaign 13V335000 on NHTSA.gov
Latches/locks/linkagesMar 7, 2013
Ford is recalling certain model year 2013 Focus and C-Max vehicles built from November 16, 2012, through November 21, 2012; and model year 2013 Escape vehicles manufactured from November 14, 2012, through November 21, 2012. The left rear door child lock was built incorrectly. As a result, the child lock may not engage when the operator uses normal force to activate the child lock.
The operator may incorrectly believe the child lock is engaged. However, the door may be opened from the inside, increasing the risk of injury to an unrestrained child.
Ford will notify owners, and dealers will inspect the affected rear door latches, and replace them as necessary, free of charge. The recall began on March 27, 2013. Owners may contact Ford Motor Company Customer Relationship Center at 1-866-436-7332.
Campaign 13V085000 on NHTSA.gov
EquipmentOct 2, 2012
This recall involves aftermarket parts sold by Yakima Products, Inc. for use on model year 2012 and 2013 Ford Focus vehicles. This recall is being conducted by Yakima, not by Ford. Certain combined Q-Tower and Q128 Clip rooftop rack systems, part numbers 8000124 and 8000728, do not fully contact the door frame.
Without proper contact of the rooftop rack clip to the door frame, there is insufficient clamping pressure and friction. The system may slide off the vehicle when loaded with accessories, possibly becoming a road hazard to other vehicles or causing injury to pedestrians.
Yakima will notify owners, and Yakima or a Yakima dealer will refund the purchase of the Q-Tower and Q-128 Clip system. There is no replacement system available for the 2012-2013 model year Ford Focus. The safety recall began on October 15, 2012. Only vehicles equipped with the vehicle rack system are affected. This recall is being conducted by Yakima, not Ford. Owners may contact Yakima at 1-888-925-4621.
Campaign 12E035000 on NHTSA.gov
Representative owner complaints
2,112 reports, newest first.
Power train, Vehicle speed control, Other or unspecified, Sep 25, 2026
Transmission error stating clutch A engaged. Yes, the vehicle is available for inspection. My safety and the safety of others were put at risk because the vehicle would not move after being stopped at the stop light or stop sign or stop during traffic.
Electrical system, Engine, Fuel/propulsion system, Sep 23, 2026
The vehicle suffered a major mechanical and electrical failure on July 28, 2026, and was immediately towed to an authorized dealership. After a multi-day delay awaiting a senior technician's analysis, the dealership issued a single service ticket grouping two distinct issues: a failed Canister Purge Valve (active Safety Recall 26S40) and localized wiring damage. The dealership fraudulently drafted the ticket to imply that external rodent damage caused the recall component failure. However, forensic photographic proof uploaded to the manufacturer database on August 13, 2026, reveals a classic consequential engineering failure: the wiring insulation is severely bubbled and thermally fused from extreme internal circuit resistance caused entirely by the defective recall component. An adjacent plastic snack wrapper remains completely pristine and untouched, disproving the rodent narrative. The vehicle has now been held in safety detention for 57 consecutive days. A corporate supervisor explicitly confirmed on a recorded line that the manufacturer has possessed these forensic photos since mid-August but left the safety file stagnant due to an internal database text-field error. Their software is failing to match the vehicle's engine string '2.0L I4 DI Ti-VCT' to the recall applicability screen 'GDI', creating a data-entry roadblock to deny a free safety remedy. I am requesting an immediate federal audit of the manufacturer's database alignment for Recall 26S40 and a manual technical override directive to initiate repairs. Manufacturer Master Case: CHX-09386351-T9Y5H1.
Electrical system, Sep 9, 2026
RE: FAULTY THROTTLE WIRING / LOCATION CAUSING CORROSION 2013 FORD FOCUS - RECALL NEEDED To Whom It May Concern: My 2013 Ford Focus SE Flex with VIN [XXX] lost power while traveling from [XXX] to [XXX] a couple times before completely dying. My code reader was getting fixed throttle codes 2112, 2111 and pending codes 122, 223. I switched out the throttle body AND accelerator pedal position sensor. This did NOT resolve the issue. I had the Focus towed to Downey Ford in [XXX] where they found a Technical Service Bulletin stating endless Focuses had this issue with corroded wiring, which appears to be caused by TSB 15-0036, which is regarding the wiring harness rubbing against a sharp part of the intake, which can cause shorts in the cables. This Ford Dealership repair cost me $845.80 + grief + an extended stay at my hospitable parents in [XXX]. This concern should be escalated to RECALL status as it leaves your loyal customers stranded on the roadside. My request is a full refund from Ford for $845.80 CAD. See Downey Ford Invoice # SO # XXX attached. Source: [XXX] [XXX]: Bear with me, this is going to be a bit long. TL;DR: Car will not accelerate, CEL/MTC states problem with "accelerator pedal position sensor". Wiring harness has been cut into by rubbing on intake. I want to splice it to fix it, but need advice due to length/resistance requirements. Two weeks ago, my wife was driving my 2013 Ford Focus SE Hatchback and right as she got off the freeway, it instantly lost power, a message appeared on the screen stating "Engine Fault - Repair Now", and it idled super rough. She restarted the engine and it was fine until she tried accelerating more than a tiny bit, at which point the same symptoms occurred again. She was able to limp the car home. Having misplaced my OBD2 scanner, I limped it over to the local auto parts store and they read the code as INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Power train, Electrical system, Sep 2, 2026
I purchased a 2013 Ford Focus from Boucher Ford of Menomonee Falls, WI in February, 2026. A few months later, Ford issued a recall on this car that requires the Powertrain Control Module to be reprogrammed to avoid issues like a collapsed fuel tank or stalling while driving, potentially causing an accident. I had been informed by a mechanic that this car was sold to me with a custom tune on the PCM. This tune was not disclosed to me when I purchased the car and due to the PCM being modified, the recall cannot be performed without damage to the PCM rendering the car undriveable. I tried working with Jeff Samp (General Manager) at the dealership but he told me they were not required by law to check for tunes when a car is traded in and that he could have someone "look at the car" but if they damage the PCM performing the recall, they will not be held responsible. I opened a case with Ford Motor Company and was informed that they would escalate to some kind of dealership oversight department and that it might take a couple weeks to get a response. I never received a response so I called Ford to inquire and was told that they are not sure why I was told that, that no such department exists, and that all they can do is call the dealership on my behalf and "ask" them to deal with it. Facts: 1. They sold me a car with a modified Powertrain Control Module which can affect many things, even falsely disabling check engine lights. 2. A FEDERAL RECALL for my own safety cannot be performed on this vehicle IN THE CONDITION THEY SOLD IT TO ME, putting my safety, my passengers' safety, and the safety of other motorists at risk. 3. Boucher Ford will not remedy this issue or even contact the previous owner as I requested to find out what kind of tune is on this vehicle so that I can get it removed and this safety recall performed. I want the PCM replaced with a new unit, with the new software that complies with this recall.
Power train, Sep 2, 2026
The contact owns a 2013 Ford Focus. The contact stated that the transmission failed, and the vehicle lost motive power, and the vehicle was stuck in the middle of traffic. The contact referenced several satisfaction programs for the issue; however, the VIN was not included in the repair. The vehicle was towed back to the residence due to it not being able to operate. The contact stated there was an unknown warning light on the instrument panel. The contact stated that the transmission had overheated. The manufacturer was notified of the failure. The vehicle was taken to an independent mechanic, and it was confirmed with transmission failure.
Structure, Aug 31, 2026
Issue happened in November 2016. The glass sunroof exploded while driving NE on I-44 just SW of Springfield MO. The reason I am reporting this now, is that I saw a news article about this happening often. Until I saw the news article I thought it was a one of event. We did not witness anything hitting the car/sunroof. I don't expect anything from this report. I just wanted report that a Ford Focus experienced this type of event.
Power train, Aug 21, 2026
See attached document for complaint.
Electrical system, Engine, Fuel/propulsion system, Jul 14, 2026
The evap canister purge valve has been a recurring problem for this vehicle. The canister was replaced in 2021, but continued having problems, as it pulled a vacuum on the fuel tank in upwards of 3/8 inch. (Documented by Murray Ford in 2023 and reassuredthere was no issue by them) the vehicle has displayed inaccurate fuel readings and caused our family to be disabled and then stranded in the night on highway 95. It put the safety of my family, and other motorists at risk The problem hasn't been duplicated because their "software fix" essentially ignored the problem altogether. There were no warnings. According to my vehicle it had at least 50 miles til empty. The fuel sending unit is displaying innacurqte fuel readings, and the fuel pump has displayed symptoms, characterized by surging, stalled when accelerating from a stop, and of course, completely shutting off, while on the highway. I've tried my best to trust and be patient with Ford and for them to do the right thing, but have been brushed off.
Engine, Fuel/propulsion system, Jul 14, 2026
I am reporting a severe vehicle safety hazard and engine stalling incident on my 2013 Ford Focus caused by an un-remedied factory emissions safety defect (related to Ford Recall 26S40 / 18S32). Due to an incomplete factory software monitoring patch, the canister purge valve stuck open and allowed continuous, unchecked engine vacuum to pull straight out of the plastic fuel tank. This heavy vacuum physically collapsed and deformed the bottom of the plastic fuel tank inward by approximately 0.25 to 0.375 inches. This structural collapse compressed the internal fuel pump assembly and mechanical float arm, falsifying the dashboard fuel gauge and distance-to-empty calculations. On April 2nd, while driving on Interstate 95 at midnight, the vehicle displayed an inaccurate fuel level, ran completely dry, and suffered a sudden engine stall in high-speed traffic without warning. My family and I were trapped in a highly hazardous situation and were forced to physically push the disabled vehicle 3 miles down the highway in total darkness. We ultimately had to enlist the emergency intervention of the Florida State Patrol Road Rangers to dispatch a unit and supply fuel so we could safely clear the interstate. The vehicle has since thrown a hard diagnostic trouble code P0443, confirming a complete electrical circuit malfunction of the EVAP system. Ford's failure to successfully deploy a functional software monitor has caused severe structural damage to my fuel system and created an imminent, life-threatening safety risk to my family on public highways. I am requesting a federal record of this incident to compel a full vehicle inspection and complete fuel system component replacement by the manufacturer."
Fuel/propulsion system, Jun 4, 2026
I had my purge valve replaced under 24N07 ford costumer satisfactory program and the faulty purge valve damaged my catalytic converter and caused my engine light to illuminate with P0420.
Other or unspecified, May 20, 2026
Transmission problems and my car is still under 100000 and it’s a 2013 ford focus
Other or unspecified, May 17, 2026
While driving home from work, I was attempting to accelerate my RPMs showed 4000. However, my speed did not match the car. He hesitated and was doing a lot of jerking after I got home turned off the car turned it back on my check engine light came on and it threw a code P07A5.
Power train, Other or unspecified, Engine, May 8, 2026
The "shift tower" typically refers to the external mechanism on top of the transmission where the shifter cables connect. Problems with this part, which is a broken internal pin, result in a shifter that moves freely without engaging any gears. The gear become in operatable when driving down the highway, which is a hazard on the road. There were no warning light just not ale to change gears.
Other or unspecified, Engine, Fuel/propulsion system, Apr 14, 2026
The vehicle began to experience issues where it was difficult to start and ran rough. Multiple times after turning off vehicle and attempting to restart later it would not restart. Had vehicle towed to dealership for repairs, they conducted a recall repair and test over multiple days. Picked up vehicle, drove approximately 7 miles. Went into store came back and vehicle would not start. Multiple other recalls are listed for this date range and motor that likely could be impacting my current vehicle. However, this VIN is not listed as a specific recall. Current situation places driver and passenger at risk as the vehicle does not run properly and does not restart
Steering, Mar 20, 2026
Steering wheel became hard to turn and then no steering and steering loss Stop safely came on the instrument panel, had car towed home and have had no one look at it yet
Electrical system, Mar 18, 2026, fire
The vehicle was serviced at Bartow Ford in Bartow, Florida, where approximately $1,100 was paid for the installation of a Body Control Module (BCM). Less than two weeks after this repair, the vehicle was returned to the same dealership due to issues involving the windshield wipers. According to the dealership’s own written statement, their technician began diagnosing the issue by replacing a blown fuse and tracing the wiring harness. While inspecting the wiring harness near the heater hose area, the technician observed coolant dripping onto the harness. When the technician touched the harness, it immediately caught fire. The shop foreman then had to disconnect the battery to prevent further damage. This fire occurred while the vehicle was in the possession and control of the dealership and during active diagnosis by their technician. Despite this, the dealership is now attempting to charge approximately $3,700 to repair the wiring harness and related components. We find this unacceptable. It is unreasonable to expect the customer to pay for repairs to damage that occurred during dealership service and inspection. This situation raises serious concerns, particularly because the dealership had recently performed electrical work on the vehicle involving the BCM only two weeks earlier.
Steering, Feb 11, 2026
During recent freezing weather, upon starting the car and attempting to turn, I realized that the steering wheel was frozen solid. While researching what could have happened, the war warmed up enough to melt the water in the electric power assisted steering motor, allowing the vehicle to turn. Now, the EPAS is seized up completely. If I had been driving when it locked up completely, it could have proved fatal. The problem has not been reproduced, as it just happened in the last couple of weeks. I never got any check engine light pertaining to this issue. OBDII showed not errors for the EPAS.
Latches/locks/linkages, Dec 1, 2025
The contact owns a 2013 Ford Focus. The contact received notification of NHTSA Campaign Number: 20V331000 (Latches/Locks/Linkages) and would like to be removed from the recall distribution list. The local dealer was contacted. The vehicle was repaired. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Power train, Electrical system, Nov 18, 2025
Our 2013 ford focus has had the shudder clutch replaced 3 times in 4 years. We paid $2500 for them to replace the clutch, forks, and adjust the tcm module. Within a year it went again. They replaced under our warranty from the first fix. Then a year later, it went again, warranty was out but ford sent a letter to replace for free. They did.. and now it’s broke again. It shudders and jerks so bad. My college daughter takes it to and from school and relies on it. I don’t understand how Ford gets away with this as it is an ongoing issue with this year make and model vehicle. It’s dangerous, will stall… and jerk. They charge to fix and all it is a bandaid for an ongoing inevitable failure again. On top of that all the electrical to the radio, speakers and such went as well. The vehicle has less than 98k miles on it. It is well taken care of. This transmission issue is Fords negligence. It’s dangerous, deadly; and I cannot believe they continue to charge for an issue they know about.
Fuel system, Gasoline, Nov 17, 2025
The contact owns a 2013 Ford Focus. The contact stated that while driving at an undisclosed speed, the vehicle stalled, the RPM decreased, and the vehicle turned off independently. While attempting to restart the vehicle, the vehicle failed to respond. The contact stated that a dealer was contacted. The contact stated that the failure had occurred on several occasions. The vehicle was taken to the dealer to be diagnosed, and it was determined that the fuel line and fuel system needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 19V515000 (FUEL SYSTEM, GASOLINE); however, the VIN was not included in the recall. The manufacturer was not notified of the failure. The failure mileage was 178,391.
Other or unspecified, Oct 9, 2025
The reverse Camera assist and alerts are faulty. The camera when you put the car into Reverse is upside down all of a sudden. The alerts continue to beep when I put the car in reverse as well. It's very dangerous because you think something is behind you even though there is nothing. Because the camera is upside down you can see anything behind you as well it just beeps non stop with no assistance.
Power train, Electrical system, Vehicle speed control, Sep 9, 2025, crash
erratic shifting and eratic slipping gears , first happened while on highway and then it wouldnt go in any gear besides reverse and would say transmission overheat wait 5 min . caused another veihcal behind me to slam on there brakes and they ended up getting rear ended from the car behind them ..... all becouse of my cars tcm or transmission issues>!!!! also not too mention ` random unusual noises coming from clutch or shifter when not even start car yet _delayed start and delayed shifting .. i could go on and on this car is a nightmare
Steering, Electrical system, Aug 19, 2025
While driving, the electric power steering went out. I purchased this vehicle on Aug 15 2025 and the Carfax report did not have any information pertaining to an issue with EPAS. To have this repaired will cost me over $3k which I was not prepared for. Being that other Ford vehicles have this EPAS recall, shouldn't a recall be made on the 2013 Ford Focus as well.
Power train, Aug 11, 2025
The contact owns a 2013 Ford Focus. The contact stated while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the failure persisted. No warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the transmission after finding metal shavings inside the transmission fluid. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA hotline for assistance. The failure mileage was 105,000.
Power train, Jul 31, 2025
The contact owns a 2013 Ford Focus. The contact stated while driving approximately 20 MPH on two occasions, the vehicle lost motive power. The check engine warning light was illuminated. The vehicle was steered to the side of the roadway and restarted. The contact stated that after the first failure, the vehicle was taken to a dealer however, the failure could not be replicated; however, the failure recurred. The contact stated that on the second failure, the vehicle was able to restart; however, the failure persisted upon restarting the vehicle. The vehicle was towed to another unknown dealer, where it was diagnosed that the Transmission Control Module had failed and needed to be replaced. The vehicle was not repaired. The contact related the failure to an unknown recall. The manufacturer was notified of the failure. The failure mileage was approximately 60,000.