2020 GMC Sierra 1500
Problems, recalls and owner-reported issues
Engine is the leading concern among 468 owner complaints filed for this model year. This is the 7th highest complaint count among 26 Sierra 1500 model years with reports.
Of the 2020 reports, 12 involved a crash and 5 involved a fire. 13 people were injured.
What owners report most often
Recalls and investigations
Power train, automatic transmission, control module, softwareFeb 12, 2026
General Motors, LLC is recalling certain 2020 Chevrolet Silverado 2500, 3500, GMC Sierra 2500, 3500, and 2020-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles that may have been repaired incorrectly under recall 24V797. The transmission control valve may fail and cause the rear wheels to lock up.
Rear wheel lock up increases the risk of a crash.
Dealers will inspect the vehicles and update the transmission control software, free of charge. Owner notification letters were mailed March 6, 2026. Owners may contact GMC customer service at 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N252516560. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 12, 2026.
Campaign 26V083000 on NHTSA.gov
Power train, automatic transmission, control module, softwareOct 24, 2024
General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up.
Rear wheel lock-up can increase the risk of a crash.
Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.
Campaign 24V797000 on NHTSA.gov
Tires, temporary/emergency spare tireDec 16, 2021
General Motors (GM) is recalling certain 2019-2021 GMC Sierra 1500 and Silverado 1500 vehicles equipped with certain accessory road tires and a 17" spare tire. The 17" spare tire provided with the vehicle is not compatible for use with the accessory wheels, which can cause the anti-lock brake system (ABS) to not function properly under certain conditions.
An ABS system that does not function properly can increase the risk of a crash.
Dealers will provide a new 17" spare tire and wheel assembly that is compatible with the accessory wheels, free of charge. Dealers will also apply a new spare tire information label, and provide owners with an owner's manual insert clarifying which spare tire to use with the accessory road tires and with the 17" original tires. Owner notification letters were mailed February 7, 2022. Owners may contact GM customer service at 1-800-462-8782 or GMC customer service at 1-800-462-8782. GM's number for this recall is N212346510.
Campaign 21V985000 on NHTSA.gov
TiresFeb 25, 2021
General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT4, XT5, Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, Traverse, GMC Yukon, Yukon XL, 2018-2021 Chevrolet Express, GMC Savana, 2019-2020 Chevrolet Blazer, Silverado 1500, GMC Acadia, Sierra 1500, and certain Continental tires sold to the aftermarket for various model year 2018-2021 vehicles. The affected tires were cured for too long during production.
Over cured tires may develop a break in the sidewall resulting in sudden air loss or a belt edge separation which could lead to a tread/belt loss. Either condition can cause a loss of vehicle control, increasing the risk of a crash.
GM will notify owners, and dealers will inspect the tires, replacing them as necessary, free of charge. The recall began March 22, 2021. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N212329050.
Campaign 21V115000 on NHTSA.gov
Seat beltsDec 17, 2020
General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position.
If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash.
GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.
Campaign 20V792000 on NHTSA.gov
TiresNov 5, 2020
General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5, GMC Acadia and Chevrolet Traverse vehicles and 2020-2021 Chevrolet Silverado 1500, GMC Sierra 1500 vehicles. The vehicles may have been manufactured with Continental tires that were overcured.
Overcured tires may experience a carcass break in the sidewall resulting in a sudden air loss or could develop a belt edge separation which could lead to partial or full tread/belt loss. Either condition increases the risk of a crash.
GM will notify owners, and dealers will inspect vehicles and replace tires that have DOT number and production mold number combinations identified by Continental, free of charge. The recall began December 17, 2020. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202319030.
Campaign 20V684000 on NHTSA.gov
Power train, driveline, driveshaftOct 22, 2020
General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 and 2020 Chevrolet Silverado 2500 trucks. One of the driveshaft joints may not have been properly welded, causing the driveshaft to separate while the vehicle is moving.
If the driveshaft separates, there may be a loss of propulsion, increasing the risk of crash.
GM will notify owners, and dealers will replace the driveshaft, free of charge. The recall is expected to begin December 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N202314870.
Campaign 20V650000 on NHTSA.gov
Air bags, side/window, curtain, inflatorJul 30, 2020
General Motors, LLC. (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5 and XT6, Chevrolet Blazer, Silverado 1500, 2500 and 3500 and Traverse and GMC Acadia and Sierra 1500, 2500 and 3500 vehicles. The diffuser component of the Roof-Rail Air Bag (RRAB) inflator may not have been properly crimped to the inflator and could separate from the inflator during air bag deployment.
If the diffuser separates from the inflator during deployment, RRAB performance may be degraded, increasing the risk of injury in a crash.
GM will notify owners, and dealers will replace the suspect RRAB modules, free of charge. The recall began September 3, 2020. Owners may contact Chevrolet customer service at 1-800-630-2438, Cadillac customer service at 1-800-333-4223, or Buick customer service at 1-800-521-7300. GM's number for this recall is N202305380.
Campaign 20V446000 on NHTSA.gov
Service brakes, hydraulic, foundation components, disc, caliperFeb 27, 2020
General Motors LLC (GM) is recalling certain 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. The bolts used to attach the front and/or rear brake calipers may have not been heat treated and may break under load.
Broken caliper bolts can reduce brake performance or interfere with wheel rotation and increase the risk of a crash.
GM will notify owners, and dealers will replace the brake caliper bolts, free of charge. The recall began March 23, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-866-522-9559. GM's number for this recall is N202294420.
Campaign 20V116000 on NHTSA.gov
Electrical system, 12v/24v/48v battery, cablesDec 12, 2019
General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. The battery positive (B+) cable rings may have been manufactured with excessive glue, potentially causing an intermittent electrical connection between the B+ cable and alternator.
An intermittent electrical connection between the B+ battery cable and the alternator could cause the vehicle to stall, increasing the risk of a crash. The intermittent connection could also lead to electrical arcing, which could generate sufficient heat to damage surrounding material, increasing the risk of a fire.
GM will notify owners, and dealers will inspect for the presence of glue or other contamination at the B+ cable attachment to the alternator and clean the connection and reattach the B+ cable connection, as necessary. If arcing has damaged the cable, nut, or alternator, the dealer will replace the damaged components. All services will be performed free of charge. GM issued owners an interim notification on February 4, 2020. GM issued second notice and the recall began March 9, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192273510.
Campaign 19V888000 on NHTSA.gov
Fuel system, gasoline, delivery, fuel pumpNov 21, 2019
General Motors LLC (GM) is recalling certain 2020 Cadillac Escalade, Escalade ESV, Chevrolet Camaro, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The fuel pump may be missing a pressure regulator, allowing for over-pressurization of the fuel system.
Over-pressurization can crack the fuel pump and cause leaks, increasing the risk of a fire in the presence of an ignition source.
GM will notify owners, and dealers will replace the fuel pump, free of charge. The recall began December 18, 2019. Owners may contact Cadillac customer service at 1-800-333-4223, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-888-988-7267. GM's number for this recall is N192283991.
Campaign 19V837000 on NHTSA.gov
Seat belts, pretensionerNov 14, 2019
General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2020 Silverado 2500, Silverado 3500, Sierra 2500, and Sierra 3500 vehicles equipped with carpet floor covering. When the front seat belt pretensioners deploy, hot gas may vent through an opening in the pretensioner bracket, possibly igniting the carpet.
A vehicle fire could result if materials ignite inside the vehicle.
GM will notify owners, and dealers will close off the opening in the pretensioner bracket, free of charge. The recall began December 13, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192270600.
Campaign 19V814000 on NHTSA.gov
Representative owner complaints: engine
248 reports, newest first. Show all
Service brakes, Hydraulic, Engine and engine cooling, Nov 25, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated while driving 45-50 MPH, the check engine warning light and the brake warning light illuminated. Additionally, the contact heard an abnormal sound coming from the engine, and the vehicle decelerated. The vehicle was taken to the dealer, where it was diagnosed and determined that all the engine lifters and the camshaft needed to be replaced. The vehicle was repaired. The contact related the failure to NHTSA Action Number: EA25007 (Engine and Engine Cooling). The manufacturer was notified of the failure and informed the contact that the VIN was not under recall. The manufacturer offered to partially cover the cost of the repair. The failure mileage was 107,787.
Engine, Nov 24, 2025
Engine fan has been constantly running, with engine temp reading around 230 consistently. After driving 5 miles on the interstate it shot up to 260 and said “engine temp overheating, idle engine”.
Engine, Nov 22, 2025
I am Having direct issues with the engine when the vehicle is started and continues while idling or driving at any rate of speed.There's a continuous "Knocking" noise that has concerned me for a while now. My vehicle (2020 GMC Sierra 6.2 liter gas engine) with almost 100,000 miles has been doing this for a while now (at approximately 50,000 miles) and (was documented at the dealership when I made a complaint which included what I considered the vehicle to be using/losing more "oil consumption" than the normal 3-4 quarts between oil change) dating back to 2022 0r 2023 when I was told by the dealership that the amount of oil being used/ lost still fit within the manufacturers specifications.
Engine, Nov 19, 2025
The engine failed and started burning oil at a rate of 3 quarts every two weeks. The vehicle is currently at the GMC dealership having the engine rebuilt at a cost of over 15,000. The vehicle has approx. 116,000 miles at time of failure, so it is outside of the manufacturers warranty. The GMC dealership (Fred Anderson Greer) has photos. The engine is a 6.2L but not currently under recall as it is a 2020, the recall includes 2021 - 2024 models.
Engine, Nov 19, 2025
My 2020 GMC Sierra 1500 Denali with the 6.2L L87 V8 just began experiencing a new rough idle with intermittent RPM dips. There are no engine codes or warning lights. Idle drops are noticeable, suddenly began this week. I am concerned due to ongoing NHTSA Engineering Analysis EA25-007 involving this engine. Some owners reported engine failure with little warning. The truck has right over 68,000 miles on it and has had every oil changed performed at a GM dealer. I have had to top off the oil between cycles and always used the recommended oil, being the Dexos Gen 3 due to the truck burning a small amount of oil. More detail on a possible cause. I believe it would be worth investigating the DFM technology. I will be performing a fuel cleaner and possibly a lifter cleaner and/or additive. I would like to tune the truck and turn off the DFM since this is what I have read causes the truck to burn oil and damage the lifters. However, I will wait until this Analysis is completed before deciding to change the truck's stock tunes.
Engine, Nov 17, 2025
My engine is currently being torn down at the dealership.I heard a ticking noise coming from my engine so I took to the dealership I bought it from and when they did their diagnostics and inspection they said it was a connecting rod bearing failure.
Engine, Nov 17, 2025
This is the 3rd catastrophic engine failure since purchasing this new vehicle from the dealership, the vehicle is currently at the dealership and is available for inspection. The latest diagnostic report has been attached from the dealership for reference. My safety and the safety of others was at risk with each occurrence. The 1st occurred on the interstate when a lifter rod bent causing loss of power with no warning, engine was rebuilt by the dealership. The 2nd occurred on the interstate when a different lifter rod bent causing loss of power with no warning, engine was rebuilt again by the dealership. The 3rd occurred just recently while on a highway. The engine suddenly turned off with no warning. The dash told me to put it into neutral and start again. I had to coast the truck for a long distance after the sudden loss of power in order to attempt to restart the engine. The engine would not start. The diagnostic report from the dealership states "engine is seized tight, maxi fuse is blown, needs engine replacement."
Power train, Service brakes, Engine, Nov 15, 2025
First my torque converter went out, no warning lights only shaking wehn shifting, I got it replaced already it cost me 2400 Second Warning light service for Brakes, Traction and power steering come on and off. And sometimes truck doesn't brake well and steering wheel feels hard to drive, it has happened while on expressway with family. Third Engine oil low Add oil warning sign comes up alot and I have to add oil, engine has a rough idle now, also when I turn truck on smoke comes out while having a rough idle, recently it started knocking, I haven't moved the truck since than
Engine, Nov 12, 2025
This is a report on an incident that happened a year ago. Vehicle was taken to GMC dealer who replaced the engine at our expense. Seems to be consistent with the problem on newer GMC's that have been covered by a recall. This 2020 is one of three GMC's owned by our company. This expense was in the $12,000 range. (The 2019 experienced similar issues in 2022 and the expense was $2800 ish, and in 2024 another $1200 ish. ) Dash lit up like a Christmas tree, all warning lights on. Stalled, barely moved.
Engine, Nov 10, 2025
Engine ticking especially when cold, dealership claims they fixed it while it was under warranty but it has continued to do it.
Engine, Nov 7, 2025
At approximately 54,000 miles had a complete engine failure. Lifter blew apart and damaged crank shaft. Complete engine rebuild. Rebuilt in approximately 3 weeks. 2022 At approximately 138,000 miles had another complete engine failure. Lifter blew apart again, Entire engine was replaced. New engine took 10 weeks to get. Installed in 2 days after recieved. 2025 No symptoms or warning lights present prior to failure.
Engine, Nov 6, 2025
Engine knock, loss of power, engine failure warning, ticking
Engine, Nov 4, 2025
While driving at highway speed and attempting to pass another vehicle, I experienced an engine failure; loss of power, noise from engine, and numerous warning messages on the display. At the GM dealer, I was informed that a pushrod (cylinder #2) was bent, the source of the engine noise. Upon further inspection (removal of cylinder heads), it was determined that the cam shaft chrome had begun to flake causing pitting (lobe damage) which in turn caused the pushrod to fail. Had the pushrod broke instead of bent at highway speed, I feel there would have been a catastrophic failure with more severe consequences for my vehicle and others around me. Vehicle was diagnosed and repaired by a certified GM dealer. There were no prior warnings/indications of problem(s). I understand there is a current recall of the GM 6.2L L87 engine for model years 2021-2024. This incident occurred on a model year 2020 GM 6.2L L87, but the issues I experienced are identical to the 2021-2024 engines identified in the recall.
Engine, Nov 2, 2025
I experienced lifter and camshaft failure on my 2020 GMC Sierra equipped with the 6.2L V8 engine at approximately 72,000 km. GMC denied warranty coverage as my factory warranty had expired only four months earlier. The repair cost me nearly $10,000 out of pocket. My vehicle has been meticulously maintained with regular oil changes performed at my local GMC dealer every 5,000 km, and it has always been fueled with premium gasoline as recommended by the manufacturer. The engine failure was sudden and unexpected. All lifters and the camshaft were replaced during the repair. Since the repair, I have noticed intermittent RPM fluctuation under light load conditions. I am currently working with my dealer to diagnose whether this issue is related to the recent engine repair or a transmission flush that was performed at the same time. I am extremely disappointed in GMC’s handling of this situation. Despite this being a well-documented issue with the 6.2L engine, I received no goodwill assistance or warranty consideration from GMC. While my dealer provided a partial discount on parts and labor, I was still responsible for nearly the entire repair cost. I hope GMC and NHTSA will review this matter closely, as owners should not be facing such expensive failures on well-maintained vehicles with this engine.
Engine, Nov 1, 2025
A lifter in my cylinder is bad and damage to my cam shaft. This truck also has the 6.2L engine that was recalled for other GMC Vehicles.My safety was put at risk as I was driving it and it started smoking. I have had 2 different mechanics look at it. One mechanic was an independent business, the other was a certified GMC dealer. There was no warning lamps or messages.
Engine, Oct 29, 2025
Rod bearings spun and engine locked up while driving 70mph on the freeway. I was in traffic, and had to work my way over and off to the shoulder of the road. The engine was diagnosed and replaced by Hiley GMC at a cost of nearly $5,000 out of my pocket. This was at approximately 63,000 miles. Just out of warranty. No loaner vehicle provided. I was without my truck for 2 months. There were no warnings at all. No lights or noises of any kind. Rod bearings spun again on the replacement engine approximately 35,000 mile later. It happened same as before. Driving on the freeway at 70mph, and the engine seized. No power steering, no warning noises or lights. I had to coast across lanes through traffic and onto the shoulder. Diagnosed and replaced by Jerry's GMC. They replaced the motor at no charge except I had to provide the new radiator because it was on backorder. They had the truck for over 3 months and I had no loaner vehicle. With approximately 65,000 miles on the latest engine, a lifter went out. I put it in the shop to have all the lifters replaced, and motor mounts replaced at a cost of $6500. Upon taking the truck for a test drive, the engine seized in traffic under an overpass and blocked one lane of traffic. The shop dropped the oil pan to check it out, and, lo and behold, this engine has spun rod bearings again. There is definitely a serious and dangerous problem with the L87 6.2L. Being a 2020, it is not currently included in the recall, but it needs to be included. I spun bearings the first time in August of 2021. I was hoping it was just bad luck. I hadn't heard of all the instances at the time. I've never had a major engine failure prior to this model, and this one has failed 3 times in the same truck with meticulous maintenance.
Engine, Oct 28, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated that while driving 55 MPH, the vehicle failed to accelerate as intended while depressing the accelerator pedal. In addition, there was an abnormal sound coming from the engine. Multiple warning lights were illuminated. The contact was able to coast to the side of the road. The vehicle was towed to the dealer, where it was diagnosed with engine failure. The engine was repaired. Most recently, while driving 35 MPH, the vehicle failed to accelerate as intended while depressing the accelerator pedal, with an abnormal sound coming from the engine. Multiple warning lights were illuminated. The vehicle was towed to the dealer, where it was diagnosed with engine failure. The contact was informed that the camshaft, bearings, and lifters in cylinder #4 had failed. The vehicle remained at the dealer unrepaired. The manufacturer was notified of the failure. However, no assistance was provided. The failure mileage was approximately 19,000.
Engine, Oct 28, 2025
The check engine light went off and started blinking. The engine started making ticking noise. I pulled over. The check engine light kept blinking. I had the truck towed to the Chevy Dealership. They found damage to the lifter and camshaft. They had the truck for over 2 weeks. Luckily I purchased the extended warranty. But the repair still cost me 1,200.00 dollars out of pocket. And cost the warranty company over 9,000.00 dollars
Engine and engine cooling, Oct 27, 2025
Tick sound coming from underneath. Also fumes smell. Dealership found it to be the exhaust system. Said the muffler valve is bad. Quoted me $2000 for repair. Never heard of a exhaust system failure in only 5 years. Very unsatisfied with this.
Other or unspecified, Engine, Oct 26, 2025
I heard a ticking noise coming from the engine compartment. I took it to the dealership that I purchased the truck from and that have been using consistently for service. I was told that the noise was coming from a lifter on the driver's side of the engine and, on further investigation, it was determined that the camshaft had been damaged. I was told that it could seize up as I was driving and that my safety and those with and around me would be at risk. At 85,000 miles, the engine had failed and would have to be replaced. There was no prior warning or no check engine light and the vehicle has been in for oil changes and all maintenance at the dealership. The new engine cost me $15000 including diagnosis and towing.
Engine, Oct 20, 2025
I noticed a ticking sound in my 2020 GMC Sierra 1500 SLT 5.3 Liter on 10/15/2025 after it was serviced at an Authorize Buick GMC Dealership on 10/13/2025. I made an appointment and returned the vehicle to the dealership for further inspection on 10/17/2025. I was informed later that day that my truck has lifters and camshaft failure. If my truck had stalled or stopped on the express way, myself and others safety could have been at risk. My truck has only been looked at by the dealership at this time, and it is available for inspection upon request. There were no warning lights, check engine lights, messages or symptoms prior to the failure. I did get a low oil level message in April 2024 when the dealership stated they must not have put the correct amount of oil in my truck during an oil change on 1/29/2024. They inspected my truck and assured me there was no damage done to my Engine from this issue. I have recently learned there is a recall for GM Vehicles manufactured between 2021 and 2024 with the 6.2L engine installed. I am not sure why this recall does not include 2020 trucks with the 5.3L engines installed. Apparently, the same problems exist with these engines also. I received an estimate for repair approximately $13,000 which can increase once the engine is town down and inspected further. Any assistance you can provide would be greatly appreciated.
Engine, Oct 17, 2025
The engine failed completely while driving. On the day of the incident, I started my 2020 GMC Sierra 1500 AT4, and immediately upon cranking, the engine began knocking loudly. I shut the vehicle off right away to prevent further damage and called a wrecker service to have it towed to Marianna Chevrolet, GMC. No warning lights or messages prior to the incident. The weather was clear and dry, and the truck was parked on level ground at the time. There were no prior warning lights, leaks, or unusual noises before this event. The vehicle has been well-maintained, with oil changes performed regularly every 4,000 miles at a local auto shop (though receipts are not available). The brakes were replaced earlier in 2025. Marianna Chevrolet, GMC inspected the vehicle and estimated the repair cost at $12,700 due to what appears to be a major internal engine failure.
Engine, Oct 15, 2025
43000 miles 2020 gmc sierra with lifter engine issues. Oil change made every 3k miles
Engine, Oct 14, 2025
6.2L V8 engine in 2020 GMC Sierra 1500 AT4 suffered two lifter failures, which damaged crankshaft and sent metal shards throughout engine and oil. Total engine replacement required. This issue is subject to a recall for 2021 - 2024 model years and the recall should extend to 2020 model years. Vehicle was traded without functioning engine at a significant loss in value for new vehicle, and is not available for inspection. Vehicle was inspected by service department at GMC dealership and traded to a different GMC dealer. No prior indications of problems or warning lights until engine failure occurred while driving.
Parking brake, Engine and engine cooling, Electronic stability control (ESC), Oct 1, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated that while driving at approximately 35-40 MPH and hauling a trailer in stop-and-go traffic, there was white smoke coming from the exhaust pipe, and the vehicle started losing power. The contact was able to pull over to the side of the road, where the Electronic Stability Control (ESC) and the check engine warning lights illuminated. The parking brake was engaging and disengaging independently. After turning off the vehicle and waiting for approximately 15-20 minutes, the vehicle was restarted, and the contact drove to the nearest independent mechanic. The mechanic diagnosed the vehicle and determined that the ignition coils needed to be replaced. The vehicle was repaired; however, it was determined that the repair had not resolved the failure. The mechanic then diagnosed the vehicle's cylinder #4 failure. The mechanic was in the process of determining whether the lifter or camshaft had failed. The mechanic determined that the engine might need to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 93,000.