2020 GMC Sierra 1500
Problems, recalls and owner-reported issues
Engine is the leading concern among 468 owner complaints filed for this model year. This is the 7th highest complaint count among 26 Sierra 1500 model years with reports.
Of the 2020 reports, 12 involved a crash and 5 involved a fire. 13 people were injured.
What owners report most often
Recalls and investigations
Power train, automatic transmission, control module, softwareFeb 12, 2026
General Motors, LLC is recalling certain 2020 Chevrolet Silverado 2500, 3500, GMC Sierra 2500, 3500, and 2020-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles that may have been repaired incorrectly under recall 24V797. The transmission control valve may fail and cause the rear wheels to lock up.
Rear wheel lock up increases the risk of a crash.
Dealers will inspect the vehicles and update the transmission control software, free of charge. Owner notification letters were mailed March 6, 2026. Owners may contact GMC customer service at 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N252516560. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 12, 2026.
Campaign 26V083000 on NHTSA.gov
Power train, automatic transmission, control module, softwareOct 24, 2024
General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up.
Rear wheel lock-up can increase the risk of a crash.
Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.
Campaign 24V797000 on NHTSA.gov
Tires, temporary/emergency spare tireDec 16, 2021
General Motors (GM) is recalling certain 2019-2021 GMC Sierra 1500 and Silverado 1500 vehicles equipped with certain accessory road tires and a 17" spare tire. The 17" spare tire provided with the vehicle is not compatible for use with the accessory wheels, which can cause the anti-lock brake system (ABS) to not function properly under certain conditions.
An ABS system that does not function properly can increase the risk of a crash.
Dealers will provide a new 17" spare tire and wheel assembly that is compatible with the accessory wheels, free of charge. Dealers will also apply a new spare tire information label, and provide owners with an owner's manual insert clarifying which spare tire to use with the accessory road tires and with the 17" original tires. Owner notification letters were mailed February 7, 2022. Owners may contact GM customer service at 1-800-462-8782 or GMC customer service at 1-800-462-8782. GM's number for this recall is N212346510.
Campaign 21V985000 on NHTSA.gov
TiresFeb 25, 2021
General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT4, XT5, Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, Traverse, GMC Yukon, Yukon XL, 2018-2021 Chevrolet Express, GMC Savana, 2019-2020 Chevrolet Blazer, Silverado 1500, GMC Acadia, Sierra 1500, and certain Continental tires sold to the aftermarket for various model year 2018-2021 vehicles. The affected tires were cured for too long during production.
Over cured tires may develop a break in the sidewall resulting in sudden air loss or a belt edge separation which could lead to a tread/belt loss. Either condition can cause a loss of vehicle control, increasing the risk of a crash.
GM will notify owners, and dealers will inspect the tires, replacing them as necessary, free of charge. The recall began March 22, 2021. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N212329050.
Campaign 21V115000 on NHTSA.gov
Seat beltsDec 17, 2020
General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position.
If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash.
GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.
Campaign 20V792000 on NHTSA.gov
TiresNov 5, 2020
General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5, GMC Acadia and Chevrolet Traverse vehicles and 2020-2021 Chevrolet Silverado 1500, GMC Sierra 1500 vehicles. The vehicles may have been manufactured with Continental tires that were overcured.
Overcured tires may experience a carcass break in the sidewall resulting in a sudden air loss or could develop a belt edge separation which could lead to partial or full tread/belt loss. Either condition increases the risk of a crash.
GM will notify owners, and dealers will inspect vehicles and replace tires that have DOT number and production mold number combinations identified by Continental, free of charge. The recall began December 17, 2020. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202319030.
Campaign 20V684000 on NHTSA.gov
Power train, driveline, driveshaftOct 22, 2020
General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 and 2020 Chevrolet Silverado 2500 trucks. One of the driveshaft joints may not have been properly welded, causing the driveshaft to separate while the vehicle is moving.
If the driveshaft separates, there may be a loss of propulsion, increasing the risk of crash.
GM will notify owners, and dealers will replace the driveshaft, free of charge. The recall is expected to begin December 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N202314870.
Campaign 20V650000 on NHTSA.gov
Air bags, side/window, curtain, inflatorJul 30, 2020
General Motors, LLC. (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5 and XT6, Chevrolet Blazer, Silverado 1500, 2500 and 3500 and Traverse and GMC Acadia and Sierra 1500, 2500 and 3500 vehicles. The diffuser component of the Roof-Rail Air Bag (RRAB) inflator may not have been properly crimped to the inflator and could separate from the inflator during air bag deployment.
If the diffuser separates from the inflator during deployment, RRAB performance may be degraded, increasing the risk of injury in a crash.
GM will notify owners, and dealers will replace the suspect RRAB modules, free of charge. The recall began September 3, 2020. Owners may contact Chevrolet customer service at 1-800-630-2438, Cadillac customer service at 1-800-333-4223, or Buick customer service at 1-800-521-7300. GM's number for this recall is N202305380.
Campaign 20V446000 on NHTSA.gov
Service brakes, hydraulic, foundation components, disc, caliperFeb 27, 2020
General Motors LLC (GM) is recalling certain 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. The bolts used to attach the front and/or rear brake calipers may have not been heat treated and may break under load.
Broken caliper bolts can reduce brake performance or interfere with wheel rotation and increase the risk of a crash.
GM will notify owners, and dealers will replace the brake caliper bolts, free of charge. The recall began March 23, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-866-522-9559. GM's number for this recall is N202294420.
Campaign 20V116000 on NHTSA.gov
Electrical system, 12v/24v/48v battery, cablesDec 12, 2019
General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. The battery positive (B+) cable rings may have been manufactured with excessive glue, potentially causing an intermittent electrical connection between the B+ cable and alternator.
An intermittent electrical connection between the B+ battery cable and the alternator could cause the vehicle to stall, increasing the risk of a crash. The intermittent connection could also lead to electrical arcing, which could generate sufficient heat to damage surrounding material, increasing the risk of a fire.
GM will notify owners, and dealers will inspect for the presence of glue or other contamination at the B+ cable attachment to the alternator and clean the connection and reattach the B+ cable connection, as necessary. If arcing has damaged the cable, nut, or alternator, the dealer will replace the damaged components. All services will be performed free of charge. GM issued owners an interim notification on February 4, 2020. GM issued second notice and the recall began March 9, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192273510.
Campaign 19V888000 on NHTSA.gov
Fuel system, gasoline, delivery, fuel pumpNov 21, 2019
General Motors LLC (GM) is recalling certain 2020 Cadillac Escalade, Escalade ESV, Chevrolet Camaro, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The fuel pump may be missing a pressure regulator, allowing for over-pressurization of the fuel system.
Over-pressurization can crack the fuel pump and cause leaks, increasing the risk of a fire in the presence of an ignition source.
GM will notify owners, and dealers will replace the fuel pump, free of charge. The recall began December 18, 2019. Owners may contact Cadillac customer service at 1-800-333-4223, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-888-988-7267. GM's number for this recall is N192283991.
Campaign 19V837000 on NHTSA.gov
Seat belts, pretensionerNov 14, 2019
General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2020 Silverado 2500, Silverado 3500, Sierra 2500, and Sierra 3500 vehicles equipped with carpet floor covering. When the front seat belt pretensioners deploy, hot gas may vent through an opening in the pretensioner bracket, possibly igniting the carpet.
A vehicle fire could result if materials ignite inside the vehicle.
GM will notify owners, and dealers will close off the opening in the pretensioner bracket, free of charge. The recall began December 13, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192270600.
Campaign 19V814000 on NHTSA.gov
Representative owner complaints: engine
248 reports, newest first. Show all
Engine, May 9, 2025
Motor failed with no warning, motor was replaced at a GM dealer for $12,000. Mechanic stated he believed it was a main bearing failure. Not under warranty.
Seat belts, Engine, May 5, 2025
Our middle seat belt has stopped working in the back seat- we have not had it replaced yet. No damage was done on it by us, but will not click into the buckle. Driving on the hi-way engine started making awful noises. We pulled over and had the truck towed to Royal Moore GMC in Hillsboro Oregon as we didn't want to cause any more harm to the engine. Royal Moore GMC informed us the engine rod bearing failed on [XXX], leading to breaching of the engine block by the rod. This caused us to replace the entire engine at the cost of over 13,000$ and no vehicle for over 3 months. (Along with engine replaced they told us we had to replace the O2 sensor as the light came on after the engine was replaced). We had to take a hardship loan to get the engine replaced, and had the truck back for 1 day before we had a o2 error l light came back on. At this time (May 5th) we are still waiting for our truck back. Royal Moore doesn't know why the engine light is on- and contacted TAC for GMC. We also contacted GMC multiple times when we were waiting for the engine. They have offered no help to us besides empty promises to call us back later. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Engine, May 5, 2025
On [XXX] at around noon I was driving my 2020 GMC Sierra northbound on [XXX] 26 miles north of Moab Utah. My truck died and I attempted to coast to the next passing lane but did not make it. The shoulder was about 3 feet wide and then had a steep drop off. I pulled over as far as I could but the majority of my truck and trailer was still in the only northbound lane. The northbound traffic was forced to cross over the double yellow into the oncoming southbound traffic. The concern was getting rear-ended by northbound traffic behind me or a head-on collision with the northbound traffic veering into southbound traffic. I made several attempts to restart the truck and the dash just goes blank with no attempt from the starter. We waited for a tow-truck and about an hour into this wait Utah Highway Patrol arrived and parked behind us with his lights on warning traffic from both directions. There were no precursors to this failure or notifications. I didn’t even hear any noises. There was no physical damage or any leaking fluids. It just quietly stopped. John Elway Chevrolet informed me the bearings failed and the engine seized. I wanted to keep the core for evidence due to learning about the numerous catastrophic failures of the L87 engine I had. Keeping the seized core was going to cost me double the cost of a rebuilt one ($7000). When I asked the service Manager, Ben why its twice the cost? He said, “GM doesn't want you keeping the core and they can set whatever price they want .” I have had this truck since it was new (6 miles) and noticed unusual oil consumption early on. I would never make it to the next oil change without having to add oil, even with the very first oil change. I inquired about this with the dealer and told this extreme oil consumption was normal and given Bulletin 01-06-01-011M. I did not involve my insurance because they do not cover engine failure. I paid $12,653.97 for a remanufactured long block. Of that was $2469.93 was for parts not need INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Engine, May 4, 2025
I was driving on the frontage road that enters the freeway when then engine suddenly failed and stalled. It lost power and seemed like it was misfiring. All the warning lights on the dashboard came on as this happened but there were no warnings lights, messages, or symptoms before this happened. The sudden loss of power posed a risk to my safety because it could have caused a crash or left me stranded. I had my vehicle towed to the Freeway Chevrolet dealer in Chandler, AZ where they inspected the vehicle and confirmed the engine had a camshaft and lifter failure.
Engine, May 3, 2025
Engine Lifters failure. Problems with Dynamic Fuel Management System
Engine and engine cooling, May 2, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated that occasionally while driving at various speeds, several unknown warning lights remained illuminated, and the vehicle lost motive power. The vehicle was taken to a local dealer to be diagnosed, and the contact was informed that DTC: P0016 was retrieved, and it was confirmed that the engine had failed and needed to be replaced. The vehicle was not repaired. The contact referenced NHTSA Campaign Number: 25V274000 (ENGINE AND ENGINE COOLING). The contact expressed a concern that the remedy was the same engine that was prone to failure. The manufacturer was notified of the failure. The approximate failure mileage was 150,000.
Engine, May 1, 2025
1) Complete Engine Failure. Vehicle is no longer is in possession for inspection but pictures and video can be provided. 2) My Truck stalled at 70 MPH going down the interstate. I was lucky to be driving in the right lane to glide to a complete stop. This could have been way worse, not just for myself but for others. 3) Shortly after the loss of propulsion on the interstate. The engine started knocking very loud and I brought it into Boucher GMC of Brookfield. After about a week, the conclusion was I needed a new Engine. The Bearings, camshaft, rods and other components within the engine were damaged. The dealership said it was because of Bad Oil. 4) Parts were inspected and Dealership provided pictures. Not sure what they did with the junk parts. 5) I initially brought in the vehicle where it was purchased at Kunes of Stoughton WI for a Check engine light that read a P06DD error code at 56472 miles on the truck. They performed a software update and sent me on way. Since then, I was dealing with a on and off engine light which eventually brought me to a engine replacement at about 70,000 miles. None of this was covered under warranty and I had to pay for all of this out of pocket. In the events of all this. GMC had my truck for about 3 months. I had to purchase another vehicle because it was cheaper then renting one, GMC didn't have a loaner I could use. I could not perform my everyday work tasks besides getting to and from work, because I did not have a truck to carry my everyday work tools. Now understanding the full impact of this faulty engine and that I could have done harm to others or my self, has me worried about driving a GM vehicle. After I received the new engine, approximately 2000 miles later, The new engine, not rebuilt started making a knocking noise, only to find out, it was the same issue after bringing it to the dealership. No engine lights or nothing. People should be scared to drive a vehicle with the L87 engine from GM.
Engine, Apr 30, 2025
3.0 LM2 Duramax engine failed at 91,000 miles. It needs a new engine and they are available with a 2-3 week wait time. The engine failure has been inspected and confirmed by the dealer. No symptoms or check engine lights were on prior to the failure. Problem first appeared 03/2025.
Engine, Apr 30, 2025
I have had two engine failures within 2 years of buying a new GMC truck. The first occurred at 24,181 miles whereas i found engine failures is an all to common occurrence with these 5.3 liter engines, failures are wide spread, tons of complaints can be found with a simple internet or youtube search. The second engine failure occurred at 45,517 miles, again with lifer falling apart. Several service bulletins have been issues including reworking vehicles on dealers lots to replace faulty components but in my case i had over 16000 miles so they put the same parts in again and did not touch the other side which then failed two years later at in my case both were attributed collapsed lifter. This is a safety concern, there is no indication this is about to occur. The vehicle loses power, shakes, instrument panel lights up with various different warning lights. If you are passing another vehicle and this occurs it can be frightening as you have no idea what is happening and why you are no longer accelerating if you are passing some vehicles. The value of these vehicles is now also diminished, who wants a GM vehicle with two engine failures with 45k miles? No one, because it more than likely going to keep occurring until the engine is damaged beyond repair.
Engine, Apr 30, 2025
Engine locked up
Engine, Apr 30, 2025
Shut off in traffic twice
Engine, Apr 29, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated that while attempting to start the vehicle, the vehicle failed to start. There was no warning light illuminated. The contact pushed the vehicle out of the garage. The vehicle was towed to a dealer where it was diagnosed that the spun bearing had failed. The contact was advised that the engine needed to be replaced. The engine was replaced. The contact stated that recently there was an abnormal sound coming from the engine. The vehicle was not diagnosed or repaired after the most recent failure. The manufacturer was not made aware of the failure. The failure mileage was approximately 40,000.
Engine and engine cooling, Apr 29, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the low oil warning light illuminated even though an oil change had been performed within 1,000 miles. The vehicle was taken to the dealer, who diagnosed a failure with the piston O-rings, resulting in damages to the engine. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Action Number: PE25001 (Engine and Engine Cooling). The manufacturer was notified of the failure but provided no assistance. The failure mileage was 79,000.
Power train, Engine, Apr 28, 2025
Merging onto highway, lost engine power. Cylinder lifter failed, damaged cam shaft, caused damage to coolant system via metal debris, and engine needs to be replaced. 76,000 miles on vehicle, regularly serviced at dealership. I inspected the parts, and was shown the cylinder lifter that had failed and fragmented as well as the galled cam shaft. There were no prior indications of impending failure (no hard shifts, jumping, warning lights, etc). Warning lamps turned on after failure. I asked the mechanic at the GMC Dealership what caused the failure, and wasn't given a definitive answer.
Power train, Engine, Apr 28, 2025
1. Vehicle automatic transmission failed during routine highway driving. Significant drivetrain vibration and limited gear availability. Warning lights included: ESC. - Electronic Stability Control TSC - Traction System Control Emergency Brake Fault light Power Steering assist reduced Flashing Yellow Engine Warning light. 2. White exhaust smoke upon arrival at GMC dealership. GMC technician advised full diagnostic would be required to assess extent of transmission failure and cause of white exhaust smoke. Service technician subsequently communicated that the engine was “failed” and would have to be replaced. Vehicle could not be driven and so full extent of transmission failure could not be assessed UNTIL ENGINE IS REPLACED!?!
Electrical system, Engine, Fuel/propulsion system, Apr 23, 2025
I was about 45 miles or so from home on [XXX]. As I left a business my truck went about 100 feet and the engine stopped working . No warning. Truck was towed to a GM dealer in Wilmington Il. It was determined the cause was due to the wiring from the engine ECM that was run over the top of a very sharp plastic mounting bracket for the ECM. The wire had been cut because of the way this was done at the factory. In addition the fuel pump also needed to be replaced . At the time of this, the truck had 39,140 miles on it. I had no warning this was about to happen. No check engine light went on , etc. Most of my route home is on the highway . Had this not happened on a side street , I would have been involved in an accident. I ended up paying $865.42 plus towing for this repair I should not be paying for. The people at the GM dealer told me this has been happening on numerous GM pick up trucks. This is NOT a maintenance issue or an isolated case. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Engine, Apr 19, 2025
2020 GMC Sierra "Denali" 6.2L engine with only 64,000 all original well maintained at miles -- NO prior issues no unusual sounds or indications of any issues. Vehicle has had timely maintenance regularly. engine lost power and began shuddering severely. Immediately taken to GM certified dealership upon which charged almost $1600.00 for engine analysis. Diagnosis is cylinder # 5 had lifter collapse which in turn ruined the camshaft. Will have to wait 4 weeks for parts and since GM power train warranty (conveniently) only covers first 60,000 miles the total engine rebuild is out of my pocket. Total price $9,741.11. THIS IS RIDICULOUS AND GM NEEDS TO REPAIR OR REIMBURSE EVERY SINGLE OWNER THAT EXPERIENCES THIS ISSUE IN FULL. I think GM knew about this issues and hopes it will go away but this really pisses me and SHOULD everyone else too.
Engine, Apr 18, 2025
Second engine failure in 8 months. 1st with 97k miles and last after 15k on a brand new 6.2L engine.
Engine, Fuel/propulsion system, Apr 13, 2025
Number 5 cylinder failure. Engined has failed cylinder is scored causing the engine to miss and lock up. The engine which is a 6.2 l87 is now under investigation for a piston failure causing the engine to lockup. The piston and engine issue has been investigated by my local repair shop and I can provide written and bore scope pictures of the failure. Yes the engine light was on the ESC was disabled and needed replaced and the traction control was disabled also the emergency brake was enabled and then failed
Engine, Apr 8, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated while driving 70 MPH, the check engine warning light illuminated, and the vehicle lost motive power. The contact attempted to restart the vehicle however, the vehicle failed to restart. The contact stated that several nearby drivers assisted with pushing the vehicle off the roadway. The contact stated that the first failure occurred the day after the vehicle was purchased. In addition, the contact stated that the failure had also occurred three times within one week. The vehicle was towed to the dealer where the vehicle was purchased. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 123,000.
Engine, Mar 27, 2025
At 59000 miles my lifters were rebuilt on the 6.2 liter engine because of a failure in the 1 and 3 piston. Gm paid for the repairs and then At 79000 miles the motor completely blew resulting in complete failure and seizing the motor and heavy metal chips were reportedly found in oil pan. Gm claimed it was a result of me not doing regular oil changes however I suffer from OCD and I am automotive engineer and my oil was changed early in most cases with my truck. Gm will not take responsibility and at the time they wanted $16k to fix my truck. I was going through a very tumultuous divorce and had to pay atty $34k for that wnd could not pay $16k for a new engine resulting in me having to give my truck back to bank and I have not been able to buy a truck or vehicle since then as it ruined my once perfect credit of 820. It’s changed my life forever and GM should take responsibility. I will never buy another GM product again and my father worked for them my whole life and my family only drove their products.
Engine and engine cooling, Mar 25, 2025
The contact owns a 2020 GMC Sierra 1500. The contact stated while driving 70 MPH, the low oil pressure warning light illuminated. The contact pulled over to the side of the road and noticed that the oil level was abnormally low. The contact added oil to the vehicle and continued driving. The vehicle was taken to Mike's Garage, where it was diagnosed that the valve cover was fractured; however, the part to repair the vehicle was on backorder. The contact related the failure to TSB Number: 22-NA-027. The dealer was notified of the failure and informed the contact that the vehicle was not covered under the TSB. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 96,000.
Engine, Mar 24, 2025
The Lifter failure, bent rod, and basically ruined the the cam shaft, the vehicle has had engine replaced and the current engine is now acting up. once again.
Engine, Mar 20, 2025
While driving our 2020 Sierra AT4 down the highway at 65 mph, the engine suddenly cut out and started sputtering. Every light came on. We pulled off the highway and had the truck towed. Our highly trusted, family mechanic company diagnosed lifter 5 was twisted and stuck, along with another stuck lifter. The cost to replace the engine was one hundred dollars more than repairing the two lifters. They purchased a new engine through Van Chevrolet and were surprised the cost had recently decreased from $7-8k to $3900, to purchase a rebuilt engine. The engine appeared to be new, with the bolt threads unused. The new engine comes with a 3year 100k mile warranty through the dealership. We called GM, they said since we went to another mechanic they would not speak with us.
Engine, Mar 17, 2025
The engine, while driving down the road, incurred a failure to the pusher rod in the #5 cylinder. This occurred at 6750 total miles on engine. Engine failure was repaired by a dealership. The failure occurred again at 99,500 miles to the same #5 cylinder causing major engine damage leading to the replacement of the engine. Our safety was put at risk as the truck decelerated and began vibrating. The second failure occurred and the engine shutdown. These incidents occurred without warning, Yes, a dealer was involved in both incidents. Only a dealership has been involved. The warning occurred after the failure.