2021 GMC Sierra 1500
Problems, recalls and owner-reported issues
Engine is the leading concern among 572 owner complaints filed for this model year. This is the 5th highest complaint count among 26 Sierra 1500 model years with reports.
Of the 2021 reports, 5 involved a crash and 6 involved a fire. 2 people were injured.
What owners report most often
Recalls and investigations
Power train, automatic transmission, control module, softwareFeb 12, 2026
General Motors, LLC is recalling certain 2020 Chevrolet Silverado 2500, 3500, GMC Sierra 2500, 3500, and 2020-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles that may have been repaired incorrectly under recall 24V797. The transmission control valve may fail and cause the rear wheels to lock up.
Rear wheel lock up increases the risk of a crash.
Dealers will inspect the vehicles and update the transmission control software, free of charge. Owner notification letters were mailed March 6, 2026. Owners may contact GMC customer service at 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N252516560. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 12, 2026.
Campaign 26V083000 on NHTSA.gov
Engine and engine cooling, engine, hard parts internal/mechanicalApr 24, 2025
General Motors LLC (GM) is recalling certain 2021-2024 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, and Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles equipped with a 6.2L V8 gas engine. The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure.
Engine failure increases the risk of a crash.
Dealers will inspect the engine, and as necessary, repair or replace the engine. For vehicles that pass inspection, dealers will add higher viscosity oil, install 6 oil fill cap, replace the oil filter, and update the owner's manual. Repairs will be performed free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Cadillac customer service at 1-800-333-4223, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is N252494000.
Campaign 25V274000 on NHTSA.gov
Power train, automatic transmission, control module, softwareOct 24, 2024
General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up.
Rear wheel lock-up can increase the risk of a crash.
Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.
Campaign 24V797000 on NHTSA.gov
Tires, temporary/emergency spare tireDec 16, 2021
General Motors (GM) is recalling certain 2019-2021 GMC Sierra 1500 and Silverado 1500 vehicles equipped with certain accessory road tires and a 17" spare tire. The 17" spare tire provided with the vehicle is not compatible for use with the accessory wheels, which can cause the anti-lock brake system (ABS) to not function properly under certain conditions.
An ABS system that does not function properly can increase the risk of a crash.
Dealers will provide a new 17" spare tire and wheel assembly that is compatible with the accessory wheels, free of charge. Dealers will also apply a new spare tire information label, and provide owners with an owner's manual insert clarifying which spare tire to use with the accessory road tires and with the 17" original tires. Owner notification letters were mailed February 7, 2022. Owners may contact GM customer service at 1-800-462-8782 or GMC customer service at 1-800-462-8782. GM's number for this recall is N212346510.
Campaign 21V985000 on NHTSA.gov
Seat beltsDec 23, 2020
General Motors, LLC (GM) is recalling certain 2020 Chevrolet Bolt EV and 2021 GMC Canyon and Sierra 1500, 2500 and 3500, Yukon, Yukon XL, Cadillac Escalade and Escalade ESV and Chevrolet Blazer, Camaro, Colorado, Equinox, Silverado 1500, 2500 and 3500, Suburban and Tahoe vehicles. Incorrect bolts may have been used at one or more fastening locations to secure the seat belts to the vehicle. If an incorrect bolt was used, the seat belt may not be properly attached to the vehicle.
If a seat belt assembly is not properly attached to the vehicle, the seat belt may not properly restrain an occupant in the event of a crash, increasing the risk of injury.
GM will notify owners, and dealers will replace the suspect bolts, free of charge. The recall began January 29, 2021. Owners may contact GMC customer service at 1-800-462-8785, Cadillac customer service at 1-800-458-8006, or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202322230.
Campaign 20V811000 on NHTSA.gov
Seat beltsDec 17, 2020
General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position.
If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash.
GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.
Campaign 20V792000 on NHTSA.gov
TiresNov 5, 2020
General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5, GMC Acadia and Chevrolet Traverse vehicles and 2020-2021 Chevrolet Silverado 1500, GMC Sierra 1500 vehicles. The vehicles may have been manufactured with Continental tires that were overcured.
Overcured tires may experience a carcass break in the sidewall resulting in a sudden air loss or could develop a belt edge separation which could lead to partial or full tread/belt loss. Either condition increases the risk of a crash.
GM will notify owners, and dealers will inspect vehicles and replace tires that have DOT number and production mold number combinations identified by Continental, free of charge. The recall began December 17, 2020. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202319030.
Campaign 20V684000 on NHTSA.gov
Representative owner complaints: engine
349 reports, newest first. Show all
Engine and engine cooling, Jun 22, 2026
The contact owns a 2021 GMC Sierra. The contact stated that while driving at approximately 40-45, the engine warning light illuminated. There was an abnormal sound coming from the fan. The vehicle was taken to the local dealer, where it was diagnosed and determined that the coolant flow valve needed to be replaced. The vehicle was not included in a special coverage program. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 50,000.
Engine, Jun 18, 2026
My vehicle began exhibiting symptoms consistent with a failed Engine Coolant Flow Control Valve. The check engine light illuminated, and diagnostic testing indicated a fault related to the coolant control valve system. In addition, I experienced abnormal cooling system operation, including the engine cooling fans continuing to run after the vehicle was shut off. Vehicle was tested few times in Auto Zone These symptoms affected the normal operation of the vehicle and are consistent with the condition described in Special Coverage N252508341. Based on the diagnostic findings and vehicle symptoms, I believe my vehicle qualifies for coverage under this program. I respectfully request that my vehicle be inspected and evaluated under Special Coverage N252508341 and that any eligible repairs be performed according to the terms of the coverage program.
Power train, Engine, Fuel/propulsion system, Jun 17, 2026
While driving my vehicle, the engine and transmission lost power and the check engine light came on. The vehicle went into limp mode and engine propulsion was limited. Had I been traveling at a faster speed, this would have been very unsafe. After coming to a stop, placing the transmission in reverse did not move the vehicle and there was a grinding noise. I was able to savely move forward in limp mode, but the shifting was harsh. I was able to find an empty parking lot to safely park. The truck was towed to Jim Winter dealership in Jackson MI for inspection.
Engine and engine cooling, Jun 16, 2026
The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the reduced power mode and Check Engine warning lights illuminated. The vehicle was taken to the dealer, where it was diagnosed with coolant control valve failure. The contact was informed that the coolant control valve needed to be replaced. The vehicle was not repaired. The contact was informed that the failure was like the failure description in Special Coverage Bulletin: N252508341. The manufacturer was made aware of the failure but provided no assistance. The contact was informed that the VIN was not associated with the Special Coverage. The failure mileage was approximately 58,500.
Engine, Jun 15, 2026
Engine Coolant Control Valve Position Sensor Minimum Stop Performance, and Chevy recalled this on this same motor and GMC needs to pays for this as it’s a major problem!
Power train, Exterior lighting, Engine, Jun 13, 2026
While coasting down or under very light acceleration between 12-20 mph the vehicle has a shudder like driving over a highway rumble strip. While cruising on the highway at 65+ mph, the vehicle has a light shudder or vibration. Vehicle has been checked numerous times for wheel and tire inconsistencies. Brake pads and rotors have also been replaced with no change in issue. Headlights daytime running light changes color from bright white to purple during warm weather. The vehicle has been to 3 different GM dealerships and they acknowledge the issues but do not provide a resolve.
Engine, Jun 8, 2026
While driving home, the engine began to run very rough with decreased acceleration, obvious overall loss of power and a significant amount of white smoke being emitted from exhausts. Several alarm indicators and codes started flashing on instrument panel including Check Engine, Service ESC, Steering Assist Reduced, and Service Parking Brake. Had truck towed to dealership. From Dealership Repair Invoice: Truck scanned with diagnostic codes 0300, 0302 present. Dealership removed right side valve cover and found rocker does not move when engine running. They removed the right side head and found cam and lifter damage. Camshaft, and all 16 lifters were replaced as per document 5659832 under warranty. Labor was 23.3 hours plus 1.2 hours to recover and recharge A/C system.
Engine and engine cooling, Jun 3, 2026
The contact owns a 2021 GMC Sierra 1500. The contact stated that while The vehicle while operating the vehicle a knocking noise was present coming from the engine and the check engine warning light had remained illuminated. The vehicle was examined by an independent mechanic who diagnosed that the engine valves had malfunctioned and engine needed to be repaired. The vehicle was not yet repaired. The manufacturer was notified of the failure but no assistance was offered. The manufacturer was notified of the failure. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 25V274000(ENGINE AND ENGINE COOLING). The contact indicated that the vehicle had experienced that same failure listed in the recall. The failure mileage was 98,000.
Engine, Jun 1, 2026
Catastrophic engine failure the connecting rod went through the block. It is my understanding that Defective Components: Manufacturing defects in the connecting rods and crankshafts can reduce oil film strength, leading to severe wear, metal debris, and catastrophic engine could be the proiblem
Power train, Engine, Forward collision avoidance, May 30, 2026
The truck randomly will not detect that it was shifted into park. Shifting between gears and back to park does not automatically fix the the issue and has taken up to 10 mins to turn the truck off. The adaptive cruise controls stopped working and can still use regular cruise control. Just not adaptive. It appears greyed out. The truck has thrown the error code: P1098, Engine Coolant Control Valve Position Sensor Minimum Stop Performance. The truck would go into limp mode until the error was cleared. This error has appeared 4 times over the past five months. The most recent date of it happening was today. 06/30/2026
Engine, May 23, 2026
While driving at normal highway speeds, I got a warning light for engine overheat condition and cooling fans came on. I also got a warning that the engine would go to reduced power. I reported this issue to my local GMC dealer. Was told that this was a comm problem with this engine however: my vin number indicated that this vehicle was not covered under warranty N252508341. I was advised to bring it in for a $250 diagnostic check and repairs could not be made for at least 2 months because of backlog. Took my truck to a local vehicle repair shop where they diagnosed a faulty coolant control valve and replaced it for me for $2388.43. Why did GMC desert me?
Electrical system, Engine, Fuel/propulsion system, May 19, 2026
Coolant Control Valve
Electrical system, Engine, Forward collision avoidance, May 19, 2026
2021 GMC Sierra AT4, VIN [XXX] , NHTSA Campaign 25V-274, GM Case XXX. Brake pad monitor failed at 128,923 miles -- 24 miles after leaving Penske Chevrolet (released at 128,899, RO XXX, 04/17/2026). Brakes became spongy immediately following service. Monitor disabled entirely to stop recurring red Service System alert. Root cause is a burnt fuse block ground fault confirmed in writing by two GM-authorized dealers. Ray Skillman (RO XXX, 06/05/2025) documented the fault then deleted Labor Operation 14BUZ ENGINE ELECTRICAL from the recall repair work order. Penske documented verbatim: "all of these other faults share this same ground circuit." The recall repair at Ray Skillman used a remanufactured short block instead of a complete engine per N252494002. The original seized-engine oil pan has never been replaced across three dealerships and 128,000 miles. GM's own Part 573 filing states this defect "increases the risk of a crash." I drove 300 miles on an interstate on 04/22/2026 with active brake warning and no loaner because GM Executive Resolution refused to authorize one. Three GM dealers have inspected this vehicle. GM Executive Resolution Team [XXX] ) has not returned calls or emails and has not confirmed in writing this vehicle is safe to operate. OnStar issued a Critical Alert for P0617 on 04/15/2026. Zero brake faults existed in the 13 months prior to the Penske visit. This is a direct continuation of unresolved electrical damage from a botched federal safety recall repair at 384 days and counting. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Engine, May 12, 2026
Engine has a terrible shake, and I was informed by a mechanic that it has a misfire and no compression in piston number seven
Power train, Engine, May 12, 2026
Right after i bought the car I had a very bad misfire on cylinder 1, the car would shake at idle. Took to dealership and they said they replaced all the spark plugs and replaced cylinder 1 coil. about a week later the misfire and shaking started again but this time it would come and go. the check engine light would be on then it would go away for a bit and then come back on over and over again. The only thing that seemed to work is if i disabled the stop and go start system and put the car in L9 to disable the AFM. This seems to work and I have since bought a disabler for these systems. However, there is still a vibration at idle and i feel that its a temporary fix to a bigger issue. This is my daily driver and constantly have my children in the car and just want the car to be safe for everyone. The transmission downshifts rough and at times seems to slip/lock up while driving. I haven't brought it to the dealership for this as of yet.
Engine, May 7, 2026
I have the same model and year for GMC as bulletin 25NA-185, Engine Coolant Control Valve Failures on 3.0L Duramax (Dec 4, 2025), and am experiencing the same exact issue. Apparently my VIN is not included and I can't get an answer from GMC or the local dealer why it's not covered or how to have it reviewed to be added.
Engine, May 5, 2026
Coolant control valve not working correctly exhaust fan on high all the time but is never overheating this has been going on for a week it shows there is a 150000 mile warranty on it but not for mine
Engine, May 2, 2026
Engine coolant control valve needed to be replaced. Special coverage (N252508341) was issued out by GM to fix this problem on 2021 GMC Sierra 1500 vehicles.
Engine, Apr 29, 2026
Driving normal traffic . Started hearing ticking . Check engine light flashing ,service esc and braking system light up. Parking not loud ticking from engine bay
Other or unspecified, Engine, Apr 22, 2026
Driving and lost all power to truck annd lost control. Was able to coast truck with no accidents. all lights turned on dash board. Engine stating to make horrible noise. Cylinder 1 had a collapsed lifter which cause the failure. They replaced all lifters on the left side. They stated that batch of lifters were faulty. Requested to have the lifters on the right side replaced since they are the same batch but they refused. They would fix once or if they collapse but since they working they would not change them. Called GMC, reported it to them. The three people I spoke with had no idea about lifter problems and it was the first they had heard of it. Multiple complaints have been reported by customers. They did not want to give permission to replace the right side or extend the warranty. When the right side give out, if I am going at high speeds on the freeway, an accident could occur causing injury or death. I know they have a recall on prior GMC but my truck is not included.
Other or unspecified, Engine, Apr 20, 2026
Coolant control valve failing. Warranty not covering this part. Seems to be a manufactured issue. Happening on a lot of 2021 GMNC Sierras with the 3.0l Duramax.
Engine, Apr 18, 2026
My L87 engine has failed due to a manufacturing issue. The recall number for this issue is N252494000. Upon contacting GMC, they state that my VIN number is not included in this recall despite having the same exact issues. I took the vehicle into a mechanic as soon as a problem had arose.
Power train, Engine, Fuel/propulsion system, Apr 16, 2026
While driving into work, I noticed a knocking sound from the outside of the vehicle. Once parked, upon further inspection I narrowed down the area of the noise to the bottom rear of the engine/front of transmission. Fortunately, I was able to park in front of my office building and wasn’t stranded on the side of the road but under different circumstances it could've been the side of a busy highway or hours from home. I had the vehicle towed to the dealership I originally purchased from, the dealership was able to duplicate the issue with me present. Later that afternoon I was informed that the engine had failed and a replacement would be ordered. There was no prior indication of a problem or warning/CEL’s. The engine failed after the dealership had completed the engine recall ( pico test and 0-40W oil change ) related to the vehicle. I am reporting this in hopes that it helps with the investigation. This has been very disappointing for me as I have supported the brand of vehicle for many years. Only to have many issues under 80,000 miles and to lose confidence in the vehicle I purchased and the company.
Power train, Engine, Apr 13, 2026
The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving approximately 45 MPH, the transmission inadvertently shifted from drive (D) to first gear. The check engine warning light was illuminated. The vehicle was pulled over to the side of the road and then towed to the dealer, where it was diagnosed, and it was determined that the valve body needed to be replaced. The vehicle was not repaired because parts were not available. The manufacturer was notified of the failure. The failure mileage was approximately 103,000.
Engine and engine cooling, Apr 9, 2026
See attached document for complaint. INFORMATION, DETAILS, COMMENTS, DATES, AND NUMBERS ON RECALL 20211500 DENALI Recall Vehicle Information: All models of GM's with 6.2L gas engine (My personal truck I owned} • Recall date: April 23, 2025 650,000 + GM vehicles with 6.2L gas engine, years 2019-2023 • Manufacturer Recall Number: N2524944000 (letter issued by State of Washington Dept. of Licensing, PO Box 9020 Olympia, WA. 98507-9020 • NHTSA Recall Number: 25V274 • 2021 GMC 1500 Sierra Denali, x-tended cab, 4wh dr, 6.2 L gas engine • Vin #: WITH 6,400 MILES ON MY TRUCK May 15, 2025 • Went to local dealer, Becker Buick-GMC in Spokane, WA., to verify there was a recall on my truck and vin. #. Confirmed with there service department and sales person Jon Stone. • I was informed that the Dealership, service dept., and salesman Jon Stone, and Sales Mgr. Cameron could only say the following: "GMC DOES NOT have the tools made yet to verify if the engine will need to be replaced and would add me too the list and keep me posted." • I was informed at this time that t he issues with the engine were: engine could stop and start again at random; the engine start to smoke and stop; the engine could catch fi re whether it was running or not, or the engine could do ALL THREE things. • I was told to just keep driving the truck but watch for any of these issues. May 28, 2025 • Stopped in local dealer, Becker Buick-GMC, again to see if any updates. • Told GMC still had done nothing to develop the necessary tools to evaluate the engine and had no date to report or share with me on when they co uld. • Again, I was told to keep driving the truck and if I had a problem, Becker Buick would come and tow me. • Salespeople did ask if I wanted to just buy a new truck several times. They were impressed my truck only had 6400 miles on it and in such excellent shape. This was to be my retirement truck. June 5, 6, 7, 2025 • I visited several car dealers in the Spokane, WA. Area. Ford, Chevy, Dodge and Toyota. While looking at new/different vehicles to buy/trade I got much the same responses. "Sorry, we CAN" TTAKE YOUR TRUCK IN TRADE, until GM releases it off the recall list and states it is repaired. Everyone was aware of this massive recall by GM. June 18, 2025 • Not getting ANY ANSWERS, I called GMC Customer Service at 800.462.8782 and spoke with Cust. Service Manager, Brandy. • After long conversations, Brandy informed me that the tool(s) to check and evaluate the engine had NOT been developed yet and she could not give me a time line as to when that would be. She further confirmed that NO DEALER in the USA had the tools yet, even after I volunteered to drive to one. • I then said what I was wanting at this point, as their GMC dealer (Becker Buick) had told me to keep driving the truck, was I wanted either a long block engine replacement at NO CHARGE or at minimum and extended warranty of 125,000 miles on the complete engine and running gear. • I was informed by her that she could not honor either, and that any of her managers would tell me that I had to work directly with my local dealer. She offered no other solutions or advice, other then GMC would keep all the dealers updated on the tools, actions, and results. • I asked for the phone info and name of the Spokane area rep and requested a meeting with him. I was told I had to do that at local dealer level. June 24, 2025 • I met with salespeople Jon Stone and his manager to discuss options, if any, that I might have. • Told them about my full conversation with Cust. Service Brandy and how upset I was. • She {Brandy) stated that I would need to get the area rep info from them. They said he was due in town the next week and would give me a call so we could have discussions. (NOTE: next week came and went and I did NOT get a call. I was told he had to change his schedule last minute) • Now, I had two trips coming up in Sept. and Oct. that I was driving the truck to. One in Havasau A:Z.. And