2017 Mazda MAZDA3

Problems, recalls and owner-reported issues

Electrical system is the leading concern among 83 owner complaints filed for this model year. This is the 15th highest complaint count among 22 MAZDA3 model years with reports.

Complaints by model year
  1. 83

Of the 2017 reports, 6 involved a crash. 1 person was injured.

Primary concernElectrical system20 reports · 24% of complaints
Owner complaints83Filed with NHTSA
Recall relationship2 safety recallsNHTSA campaign records

What owners report most often

  1. Other or unspecified27
  2. Electrical system20
  3. Back over prevention11
  4. Service brakes7
  5. Engine5
  6. Visibility/wiper5
  7. Structure4
  8. Forward collision avoidance3

Recalls and investigations

  1. Back over prevention, sensing system, cameraJul 14, 2023

    Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.

    A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.

    Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.

    Campaign 23V487000 on NHTSA.gov

  2. Visibility, windshield wiper/washerApr 4, 2019

    Mazda North American Operations (Mazda) is recalling certain 2016-2018 Mazda3 vehicles. A defective windshield wiper relay may cause the windshield wipers to become inoperative, reducing the driver's visibility.

    Reduced visibility while driving can increase the risk of crash.

    Mazda will notify owners, and dealers will replace the front body control module with a new module which uses an improved wiper relay design, free of charge. The recall began May 7, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3219D.

    Campaign 19V272000 on NHTSA.gov

Representative owner complaints: back over prevention

11 reports, newest first. Show all

  1. Back over prevention, Mar 31, 2025

    Hello frustrated people! Second time back to the dealership...backup camera they say got wet from moisture, (after 2 drained batteries in less than 2 years), my cost. I think that this is a very dangerous vehicle that I am driving now!!!! Besides the fact, at my age, being stuck in a parking lot in 20 degree weather for 3 hours waiting for roadside assistance. The camera goes haywire...I cannot connect to the phone or navigation system. I can't leave my house for fear that my car is not going to start! Now I have to pay for a backup camera??? WE think that is the problem, they told me! So far the quote is $600.00...... A DANGER to drive! Can you imagine , pulling off the side of the road, when your navigation goes out! And now warmer weather, it doesnt do that. So how are they going to know now????

  2. Back over prevention, Nov 8, 2024

    The contact owns a 2017 Mazda Mazda3. The contact stated that while in reverse(R), the rearview camera would intermittently display a distorted or blank image. The vehicle was taken to a dealer where the camera was replaced under warranty; however, the failure returned almost a year later after the repair. The contact then received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed parts were not available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 55,000. VIN tool confirms parts not available.

  3. Back over prevention, Oct 7, 2024

    The contact owns a 2017 Mazda Mazda3. The contact stated that while reversing, the rearview camera image was distorted or showed a black screen occasionally and failed to engage on other occasions. The vehicle was taken to the dealer, where the rearview camera was replaced several times; however, the failure persisted. Additionally, the contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 42,098. VIN tool confirms parts not available.

  4. Back over prevention, Aug 9, 2024

    The contact owns a 2017 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

  5. Back over prevention, Jul 22, 2024

    The contact owns a 2017 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated while the vehicle was parked, the rear-view camera screen failed to display an image. There was no warning light illuminated. The vehicle was taken to the dealer but was not diagnosed. The vehicle was not repaired. The manufacturer was not made of the failure. The failure mileage was approximately 50,000. VIN tool confirms parts not available.

  6. Back over prevention, May 22, 2024

    The contact owns a 2017 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention). The contact stated that on several occasions while the vehicle was shifted into reverse(R), the rearview camera image was distorted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was 30,000. VIN tool confirms parts not available.

  7. Electrical system, Forward collision avoidance, Back over prevention, Apr 22, 2024

    The contact owns a 2017 Mazda Mazda3. The contact stated while driving at various speeds in the rain or in the snow, the instrument cluster, the instrument panel, and the infotainment system became inoperable, causing the Forward Sensing Camera system to become inoperable. Additionally, the contact stated that the rearview camera was inoperable while reversing in the rain or in the snow. The contact stated that the failure had been recurring while operating the vehicle in inclement weather. The dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 23V487000 (Back Over Prevention). The manufacturer was notified of the failure and informed the contact that that the VIN was not included in the recall. The failure mileage was approximately 30,000.

  8. Back over prevention, Apr 15, 2024

    The contact owns a 2017 Mazda Mazda3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

  9. Other or unspecified, Back over prevention, Oct 24, 2023

    My car has a recall on the backup camera. Manufacturer Recall Number6023G NHTSA Recall Number23V-487 The recall issued in July. But I'm being told they cannot fix it. And as I'm trying to sell my car, I'm being told by buyers that the car has less value because of the unrepaired recall.

  10. Electrical system, Back over prevention, Nov 18, 2022

    The contact owns a 2017 Mazda Mazda3. The contact stated that while operating the vehicle, the main display screen malfunctioned, and the back-up camera failed to display an image. Additionally, the display provided erroneous warnings included the low tire pressure information. The cause of the failure was not yet determined. The local dealer was notified of the failure and indicated that the display interface was faulty and needed to the replaced. The vehicle was not yet repaired. The manufacturer was not yet contacted. The failure mileage was 80,000.

  11. Back over prevention, Nov 15, 2022

    The contact owns a 2017 Mazda Mazda3. The contact stated that the Mazda Connect touch screen in the center display was operating independently; however, there was no visible damage to the touch screen. The contact stated that the failure was significantly distracting while driving. The dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and informed the contact that it was a known failure. The manufacturer referred the contact to the dealer. The contact related the failure to Mazda Warranty Extension Number: SSPB6. The failure mileage was approximately 61,000.