2016 Ford F-150
Problems, recalls and owner-reported issues
Power train is the leading concern among 73 owner complaints filed for this model year. This is the 12th highest complaint count among 26 F-150 model years with reports.
Of the 2016 reports, 3 involved a crash and 1 involved a fire. 1 person was injured.
What owners report most often
Recalls and investigations
Power train, automatic transmissionApr 14, 2026
Ford Motor Company (Ford) is recalling certain 2015-2017 F-150 vehicles. A loss of signal between the transmission range sensor and the powertrain control module can cause the transmission to unexpectedly downshift into second gear.
Unexpectedly downshifting into second gear may result in a loss of vehicle control, increasing the risk of a crash.
Dealers will update the powertrain control module software, free of charge. Owner notification letters were mailed July 24, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S28. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on April 15, 2026.
Campaign 26V237000 on NHTSA.gov
Service brakes, hydraulic, power assistMar 11, 2022
Ford Motor Company (Ford) is recalling certain 2016-2017 Ford Expedition, Lincoln Navigator, and 2016-2018 F-150 vehicles equipped with 3.5L Ecoboost engines. The brake master cylinder may allow brake fluid to leak from the front wheel circuit into the brake booster.
A loss of brake fluid may result in a change in brake pedal travel, increased pedal effort and reduced front brake function, requiring greater effort and distance to stop the vehicle. These conditions can increase the risk of a crash.
Dealers will replace the brake master cylinder. If the master cylinder is leaking, the brake booster will also be replaced. Repairs will be performed free of charge. An interim owner notification letter notifying customers of the safety defect were mailed on April 29, 2022. Owner notification letters were mailed April 29, 2022. This recall is an expansion of NHTSA recall number 20V-332. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S11.
Campaign 22V150000 on NHTSA.gov
Suspension, front, control arm, upper ball jointApr 12, 2021
Tenneco Automotive (DRiV) is recalling certain MOOG K500359 ball joints, for aftermarket installation on 2015-2018 Ford F-150 trucks. The ball joint may have a misaligned dust boot and may be missing alignment hole and installation warning tag, which may lead to improper alignment of the ball joint.
An incorrectly installed ball joint may cause the ball joint stud to break, which can compromise front wheel control, increasing the risk of a crash.
DRiV will notify owners, and dealers will inspect, and if necessary replace the ball joint, free of charge. Owner letters were mailed May 5, 2021. Owners may contact Tenneco Automotive customer service at 1-877-489-6659.
Campaign 21E027000 on NHTSA.gov
Service brakes, hydraulic, foundation components, master cylinderJun 8, 2020
Ford Motor Company (Ford) is recalling certain 2014-2017 F-150 pickup trucks equipped with 3.5L Ecoboost engines. The brake master cylinder may leak brake fluid into the brake booster.
A loss of brake fluid may result in a change in brake pedal travel and feel, increased pedal effort and reduced front brake function, possibly requiring greater effort and distance to stop the vehicle. These conditions can increase the risk of a crash.
Ford will notify owners, and dealers will replace the brake master cylinder and inspect the brake booster, replacing it as necessary, free of charge. Ford issued owners an interim notification on June 30, 2020. The recall began on October 28, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S31.
Campaign 20V332000 on NHTSA.gov
EngineFeb 21, 2020
Ford Motor Company (Ford) is recalling certain 2015-2016 F-150 pick-up trucks equipped with 3.5L GTDI engines and block immersion heaters that were potentially relocated from their originally installed location. The incorrect location could put the heater too close to hot engine components, possibly resulting in a damaged cable.
A damaged cable could cause a resistive short, increasing the risk of overheated or melted wiring, increasing the risk of a fire.
Ford will notify owners, and dealers will inspect the block heater's location and its cable, replacing components as necessary, free of charge. If the replacement parts are not available, dealers will disable the existing block heater cable from being used until parts become available. The recall began April 9, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S08.
Campaign 20V098000 on NHTSA.gov
EngineApr 8, 2019
Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater and previously remedied under recall 18V894. During the previous repair, the block heater cable's splice connector may have been damaged.
A damaged cable could cause a resistive short, increasing the risk of overheated or melted wiring, increasing the risk of a fire.
Ford will notify owners, and dealers will disable the engine block heater from being used. When replacement cables become available, a second notice will be mailed and dealers will replace the engine block heater cord, free of charge. The recall began May 31, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S11.
Campaign 19V278000 on NHTSA.gov
EngineDec 18, 2018
Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater. Water and contaminants may get into the block heater cable's splice connector causing corrosion and damage.
When the heater is plugged in, prolonged corrosion could cause a resistive short, increasing the risk of overheated or melted wiring which can increase the risk of a fire.
Ford will notify owners, and dealers will disable the block heater cable, free of charge. Once parts are available, Dealers will replace the engine block heater cable, free of charge. The recall began June 3, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S45.
Campaign 18V894000 on NHTSA.gov
Seat belts, pretensionerAug 31, 2018
Ford Motor Company (Ford) is recalling certain 2015-2018 Ford F-150 Regular Cab and SuperCrew Cab vehicles. If a front seat belt pretensioner deploys as the result of a crash, the sparks may ignite materials such as carpeting or insulation within the B-pillar area.
A vehicle fire could result if materials ignite inside the vehicle.
Ford will notify owners, and dealers will remove the B-pillar insulation material and wiring harness tape, and install heat resistant tape, free of charge. The recall began September 28, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S27.
Campaign 18V568000 on NHTSA.gov
SeatsNov 29, 2017
Ford Motor Company (Ford) is recalling certain 2016 F-150 and Explorer vehicles. Loose power seat adjuster pivot bolts may cause the front seat cushions to detach and not properly restrain the seat occupant in the event of a crash.
In the event of a crash, a seat occupant that is not properly restrained has an increased risk of injury.
Ford will notify owners, and dealers will inspect the tightness of the power seat track upper pivot link bolt, either applying threadlocker or replacing the lift link and hardware, free of charge. Interim letters are expected to go out January 15, 2018. Owners will receive a second notice when the remedy becomes available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S40.
Campaign 17V767000 on NHTSA.gov
Latches/locks/linkages, doors, latchOct 16, 2017
Ford Motor Company (Ford) is recalling certain 2015-2017 Ford F-150, and 2017 F-250, F-350, F-450, and F-550 Super Duty trucks. The doors on these vehicles may have a bent or kinked actuation cable or the door latches may freeze after water gets into the latch. Either condition can result in the doors opening while driving although they appear to be closed.
A door that opens while driving can increase the risk of injury.
Ford will notify owners, and dealers will inspect the door latch actuation cables and repair if necessary, and install water shields over the door latches, free of charge. The recall began October 12, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S33.
Campaign 17V652000 on NHTSA.gov
Seat belts, rear/otherAug 28, 2017
Ford Motor Company (Ford) is recalling certain 2015-2017 F-150, and 2017 F-250 and F-350 trucks equipped with a crew cab. The left rear inflatable seat belt buckle assembly may be inadequately attached to its mounting bracket. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."
If the left rear inflatable seat belt buckle separates from it's mounting bracket, the seat occupant may not be adequately restrained, increasing their risk of injury.
Ford will notify owners, and dealers will inspect the seat belt assembly, replacing the attaching rivet as necessary, free of charge. Interim notices informing owners of the safety risk were mailed October 18, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 17C12.
Campaign 17V526000 on NHTSA.gov
Latches/locks/linkages, doors, latchMay 22, 2017
Ford Motor Company (Ford) is recalling certain 2015-2017 F-150, and 2017 F-250, F-350, F-450, and F-550 vehicles originally produced with black or body colored exterior door handles that may have been subsequently equipped with a chrome exterior door handle cover accessory kit purchased from a Ford dealer. These accessory door handle covers may cause the doors to unlatch in a side impact collision. As such, these vehicles may fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
If the doors unlatch and open in a side impact collision, the occupants have an increased risk of injury.
Ford will notify owners, and dealers will remove the accessory covers and refund the purchase price. The recall began July 13, 2017. Owners may contact Ford at 1-866-436-7332. Ford's number for the recall is 17C09.
Campaign 17V331000 on NHTSA.gov
Seats, front assembly, reclinerJun 28, 2016
Ford Motor Company (Ford) is recalling certain model year 2016 Ford Explorer and F-150 vehicles equipped with a manual recline driver's seat. The seat back frame may have insufficient welds which may not meet the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 202, "Head Restraints" and 207, "Seating Systems."
The seat back may not adequately restrain the occupant during a crash, increasing the risk of injury.
Ford will notify owners, and dealers will inspect and, if necessary, replace the seat back frame, free of charge. The recall begin on August 18, 2016. Owners may contact Ford at 1-800-392-3673. Ford's number for this recall is 16C11.
Campaign 16V475000 on NHTSA.gov
Air bags, sensor, occupant classificationFeb 25, 2016
Ford Motor Company (Ford) is recalling certain model year 2016 F-150 trucks manufactured April 27, 2015, to November 22, 2015, and equipped with Multi-Contour Seats (MCS). The front passenger seat Occupant Classification System (OCS) that calibrates the air bag deployment level may incorrectly classify an adult as a child when the seat massage feature is activated.
If an adult is incorrectly classified as a child, the passenger frontal air bag will not deploy during a crash, increasing the risk of injury.
Ford will notify owners, and dealers will update the Occupant Classification System Module (OCSM) with new software, free of charge. The recall began on March 11, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S05.
Campaign 16V110000 on NHTSA.gov
Representative owner complaints: power train
57 reports, newest first. Show all
Power train, Sep 24, 2026
2016 Ford F-150, 5.0L, 6R80 transmission, 112,083 miles. Safety Recall 26S28 was performed on 08/05/26 at an authorized Ford dealer. The wrench/powertrain warning recurred on 08/15/26. On 08/20/26, at 111,998 miles, the dealer found DTCs P0720 and P0722 (output shaft speed sensor) and stated in writing that the transmission molded leadframe must be replaced. Ford denied coverage under Customer Satisfaction Program 26N04 because those codes are not on the program's list. The transmission then failed on two consecutive days, within about 85 miles of driving since the dealer visit. On 09/23/26, while I was accelerating across two lanes of traffic, the engine revved abnormally high during an upshift, as if the transmission failed to engage a gear. It then stayed in 3rd, and I had to make a left turn from a stop at an intersection in 3rd gear with greatly reduced power. On 09/24/26, after crossing a four-lane highway intersection, the warning appeared while I was accelerating uphill. The transmission stayed in 3rd at a complete stop and would not downshift to 1st. Shifting through Park and using manual mode did not restore 1st gear; only an engine restart did. In both events the warning light cleared itself while the fault continued, so the dashboard gave no indication of the problem. Turning left across oncoming traffic and pulling away from stops near highway traffic with reduced power is a safety risk. The recall remedy did not prevent this failure, and the repair the dealer says is required is being denied under the related program.
Power train, Sep 23, 2026
I am reporting that the Corporate Ford Company is knowingly requiring a software update that minimizes a safety hazard instead of eliminating a safety hazard (NHTSA Recall 26V237). Here are the facts: ---Lebanon Ford service said that they cannot tell me what the software update 26S28 will do to fix the danger of driving my vehicle. The mechanic (Michael) said that the software update is meant to fix the transmission molded lead frame, but that it does not. My research about this software update states that the truck will unexpectedly downshift to 4th gear (instead of downshifting to 1st gear without the update). This downshifting issue poses a danger to people driving on the highway! Consider trucks suddenly downshifting to 4th gear in front of you on the highway (some towing)! Ford Recall: 26N04 is a fix that will eliminate danger, but Ford is NOT fully implementing it! Molded Lead Frame Failure The Issue: The internal wiring harness (the lead frame) holds the speed and temperature sensors. When it fails, it sends bad data to the computer. Symptoms: Erratic shifting, a wrench light on the dash, or a check engine light with speed sensor codes. Unexpected Downshifts (Recall 26V-237) --THIS IS THE SOFTWARE UPDATE THAT DOES NOT SOLVE THE DANGEROUS RISK. On XXX, Ford did NOT complete the Recall 26N04 (Ford #), only the NHTSA 26V237 software update, which does not eliminate dangerous driving on the highway. I am attaching the event information that I gave to Lebanon Ford at the time of service. ALTHOUGH THERE WAS NO CRASH AND NO CASUALTIES, I CANNOT, IN GOOD CONSCIENCE, DRIVE MY 2016 FORD F-150 ON THE HIGHWAY BECAUSE FORD IS ONLY LESSENING THE SYMPTOM, WHICH IS STILL A DANGER TO PEOPLE. FORD CAN FIX THE PROBLEM TO ELIMINATE DANGER, BUT THEY CHOOSE NOT TO DO SO.
Power train, Vehicle speed control, Sep 21, 2026
XXX: I scheduled an oil change online and selected the open transmission safety recall. [XXX] Ford executed Recall 26S28 (PCM Programming) under verification code RGLKT7MASIPIJ. The truck had absolutely no shifting issues prior to this flash. XXX: Within two weeks of the software update, the truck began experiencing the exact erratic shifting and violent gear-dropping safety hazards described in the recall. I returned the truck to the dealer. XXX: After days of complete silence, I had to initiate contact. First by phone, then by physically walking into the service desk on XXX to get answers because the dealer ignored my vehicle. Mid-XXX: After the truck sat on their lot for three weeks, they finally scanned it and retrieved code P2701. The dealer stated the recall wouldn't cover it and immediately quoted me $8,000 to rebuild or $10,000 to replace the transmission. They claimed they would submit the case to Ford Corporate. XXX: Having heard nothing, I returned to the dealership in person. I was told they still had no response from corporate. The Paperwork Contradiction: The technician's notes on Page 3 explicitly state: "No update so that one recall cannot be performed, must been updated at some point." This proves the technician failed to look at their own shop's service history from XXX (Page 2), where they signed off on completing the update. Furthermore, they condemned the entire transmission based strictly on a digital code scan; they never dropped the pan or performed any physical diagnostic work. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Power train, Sep 18, 2026
The contact owns a 2016 Ford F-150. The contact stated that while driving 65 MPH, the transmission unexpectedly downshifted, and the vehicle lost motive power and decelerated. Additionally, there was an abnormally loud sound coming from the vehicle with the power train warning light illuminated. The dealer was contacted by phone and made aware of the failure. The vehicle was taken to the dealer where the failure was confirmed. The contact was informed that an unknown PCM software update was completed. The vehicle was repaired but the failure reoccurred. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The contact stated that the vehicle was unsafe to drive. The manufacturer was contacted by phone and made aware of the failure. The failure mileage was approximately 100,000.
Power train, Sep 18, 2026
There is currently a recall on 4 of the sensors on the same rail n the transmission due to it locking in 3rd or 5th gear. When I took the truck in they pulled the codes and it was not one of the 4 so Ford does not have an active recall. There was another person in line in front of me who had the same issue on the same two codes.
Power train, Sep 18, 2026
I participated in Safety Recall 26V237 -2016 F-150 Ford Truck transmission issues. Under the recall, Ford completed a transmission programming update to resolve the safety concerns. The campaign DID NOT resolve the transmission issues. The truck is still a hazzard to drive & needs further repairs or transmission replacement. Please do not allow Ford to remain unaccountable for the failure to correct the issue.
Power train, Engine, Sep 17, 2026
Driving down Highway 6/34. Cruise set at 65 mph. The truck on its own Shifted into 2nd gear and revving up the engine caused the vehicle to slow uncontrollably, which is very unsafe driving. The 2016 has a safety recall to prevent this from happening. I am writing this to report that my truck has had the recall done, and this still happened. I will park the truck until Ford can fix it. But they are trying to get out of fixing this safety issue with all these trucks. At 65 mph, I lost control of the truck, and thank goodness there were no other vehicles on the road around me
Power train, Sep 16, 2026
Performance Ford in Utah falsified a federal safety recall completion for Recall 26S28/19V446000 on my 2016 F-150. They only performed a software flash, manually wiped the transmission's safety fault codes from the memory cache, and joyrode my vehicle for 200 unauthorized miles. They returned the vehicle to me unrepaired, where it immediately suffered an erratic downshifting hazard and engine limp mode, endangering my safety.
Power train, Sep 15, 2026
Powertrain recall stated because the code didn’t show on a SAFETY RECALL that can cause vehicle to shift from 5th to 1st gear while driving per stated recall Ford will not honor because it’s not one of the codes they state but the recall doesn’t specify a code. We had it at the dealership twice and they said they would fix it for $ 1400.00 well we didn’t cause the recall and we should not be responsible for paying. Would just like someone to contact us before my husband or someone else gets hurt in an accident.
Power train, Sep 15, 2026
Ford mailed me a XXX Customer Satisfaction Program 26N04 letter for my 2016 F-150, VIN [XXX]. That letter offered a one-time, no-charge replacement of the transmission molded lead frame if the dealer determined replacement was needed, and it described a malfunction indicator lamp and/or wrench light when that part fails. My truck did exactly that. It stored P0715 and P0717, went into limp mode, and the wrench came on. Titus-Will Ford in Tacoma confirmed the turbine speed sensor is part of the lead frame and replaced it (part AL3Z-7G276-D). They denied 26N04 because those codes are not P0705, P0706, P0707, or P1702 — a code list the customer letter never disclosed. The failed part is the part named in your letter. The symptoms are the symptoms named in your letter. I paid invoice XXX dated XXX. The lead-frame line was $1,630.02. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Power train, Sep 8, 2026
The contact owns a 2016 Ford F-150. The contact stated that while driving 70 MPH, the transmission unexpectedly downshifted to 3rd gear. The contact received notification of NHTSA Campaign Number: 26V237000 (Power Train); however, the dealer and manufacturer stated that the VIN was not included in the recall, and the fault code listed in the recall was not retrieved from the vehicle. The contact stated that after the vehicle skidded on the roadway after the unexpected downshift, there was an orange WRENCH light illuminated on the instrument panel. The manufacturer was notified of the failure. The vehicle was not repaired.
Power train, Sep 7, 2026
In April of this year my 2016 F150 began having issues related to the automatic transmission. Symptoms included unexpected and irregular downshifting from 6th gear into 4th gear while traveling on the highway, random and irregular shifting from gear to gear, and not gearing down below 3rd gear when coming to a complete stop. While these symptoms were happening the truck displayed the MIL and powertrain warning lamp. These issues put myself and others at risk because having the vehicle unexpectedly downshift while traveling at a high speed causes the vehicle to become difficult to control, increasing the risk of a crash. It is also difficult for the vehicle to increase speed in a timely and safe manner when it is starting out in 3rd gear. In May I received a recall notice from Ford, eventually in July having the dealer closest to me perform a PCM software upgrade. While waiting for Ford to make this software upgrade available I received a notice from Ford referencing Customer Satisfaction Program 26N04. This notice states that if my vehicle set a MIL and/or powertrain warning light (which my vehicle did both) I may need to get the transmission molded leadframe replaced as part of this recall program. When I picked up my vehicle from servicing dealership I was informed my vehicle "did not have the appropriate code" to warrant this repair. However, the software upgrade performed has done nothing to fix the problem I am experiencing. My vehicle still downshifts randomly and unexpectedly while displaying a powertrain warning light, and making my vehicle unsafe for highway travel.
Power train, Sep 4, 2026
The contact owns a 2016 Ford F-150. The contact received an unknown recall notification. The dealer was contacted by phone and scheduled an appointment for a technician to pick up the vehicle. The technician drove the vehicle to the dealer. The unknown recall repair was completed. The contact received a phone call from the dealer and was informed that while the technician was in route and driving the vehicle back to the residence, the transmission independently shifted from fourth gear to first gear. The technician drove the vehicle to the dealer. The vehicle was with the dealer for two weeks. The contact received a phone call and was informed that no warning lights were displayed, and the failure could not be duplicated. The contact was informed to pick up the vehicle. The dealer informed the contact that there was no fix available. The contact was informed that the dealer would not be offering any additional repairs. The contact stated that the vehicle had no issues prior to the unknown recall repair. The failure mileage was approximately 128,000.
Power train, Sep 3, 2026
The contact owns a 2016 Ford F-150. The contact stated that the vehicle was repaired under an undisclosed recall; however, the recall repair failed to prevent a failure. The contact stated that while driving at an undisclosed speed, the vehicle hesitated while upshifting or downshifting between 4th and 6th gear. The same local dealer was contacted and advised the contact that the 4th and 6th clutches were burned. The manufacturer was made aware of the failure. The failure mileage was approximately 249,000.
Power train, Engine, Sep 3, 2026
The contact owns a 2016 Ford F-150. The contact stated that vehicle was taken to the local dealer for a recall repair associated with the PCM reprogramming. Upon retrieval, the vehicle went into LIMP Mode while driving. The contact stated that while driving at an undisclosed speed, the transmission unexpectedly downshifted to a lower gear, and the vehicle lost motive power. The dealer was contacted and provided the contact with an estimate for a diagnostic test. The contact spoke with a supervisor, but no additional assistance was provided.
Power train, Electrical system, Sep 2, 2026
I would like to file complaint against Ford for their latest recall (26N041) and how they are not doing replacing the defective Lead Frame in customers vehicles. It's a big scam and a waste of time. I brought my 2016 Ford F-150 in for Ford’s latest recall (26N04) affecting 2015–2017 models due to the transmission leadframe issue. I explained that I’ve been dealing with an intermittent problem for the past seven months: while driving, the gear indicator lights on the dash begin to flicker, and when that happens, the transmission shifts extremely hard and slams into the next gear. Ford kept my truck for a week and told me they were unable to duplicate the issue. They stated that multiple technicians drove the vehicle and none of them observed any problems. When I arrived to pick it up, I was handed a bill for more than $250 for a diagnostic fee. Within four miles of leaving the dealership, the gear indicator lights began flickering again. It’s difficult to accept that several technicians drove the truck over multiple days and never encountered the issue I experienced almost immediately. The entire process felt like a waste of time and money, and I’m left without any resolution to a problem that clearly still exists. They are not honoring the recall, they are trying to charge customers for the repair.
Power train, Sep 1, 2026
Truck downshifts into low gear, yellow wrench and engine light come on and the truck goes into limp mode, no warnings or anything. These symptoms first started about 5 months ago and I have stopped driving the truck for that time. I took it to the dealer after looking it up and seeing there was a recall 26S28 for the molded leadframe. At the dealer they told me they couldn't perform the service because my truck was showing codes: P061A-00, P0720-00, and P0722-00 and they needed: P0705, P0706, P0707, P1702 to perform the recall service. My codes also point to the molded leadframe but the speed sensors instead of the range sensors.
Power train, Aug 31, 2026
XXX, my Ford F-150 began experiencing serious and unpredictable transmission shifting problems. The truck would downshift unexpectedly while traveling at various speeds. At times, it would not downshift properly when coming to a complete stop, and it would sometimes shift back up into third gear from a complete stop at a stoplight.On one occasion, while traveling approximately 65 mph, the truck unexpectedly downshifted. The sudden change in the vehicle's behavior was extremely unsettling and made me concerned about maintaining control. What made the situation even more frightening was that I had no center lane or safe area to pull over without potentially becoming a hazard to the traffic around me. I had nowhere to simply get out of the way and figure out what was happening. That is an extremely unsettling feeling when you are traveling at highway speeds. Another incident was even more frightening. While traveling approximately 55 mph on the highway, the truck unexpectedly downshifted while a logging truck was traveling directly behind me. Fortunately, I was able to maintain control of the vehicle and safely pull onto the shoulder. I contacted my local Ford dealer and was told that its a Software repair, was not yet available and that I would need to wait for Ford's software fix. Extremely concerned about continuing to drive a vehicle that was behaving this way, I contacted Ford directly and asked Is it safe to continue driving the vehicle? Response -Ford was not advising owners to discontinue operation of the vehicle. Took place on XXX, at approximately 8:11 a.m. with Ford representative [XXX]. On XXX, I bring the truck to the Ford dealership for the software update. I received the vehicle back the same day, expected the problem had finally been corrected. Like I never had the truck "software" fix. Back to dealership - they redid the software fix, not fixed. No codes, and still no fix for the transmission shifting. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Power train, Aug 27, 2026
The contact owns a 2016 Ford F-150. The contact had received notification of NHTSA Campaign Number : 26V237000 (POWER TRAIN) and the vehicle was taken to a local dealer where it was remedied. The contact contact continued to drive the vehicle when the failure occurred while driving at 60 MPH the transmission downshifted from 5th gear into 3rd gear, the service vehicle soon warning light was illuminated. The vehicle was taken back to the dealer where it was diagnosed and the contact was advised that the molded plastic lead frame was faulty and would need to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 116,000.
Power train, Aug 27, 2026
On August 21, 2026, my 2016 Ford F-150 was serviced at Five Star Ford to perform safety recall 26S28 (Powertrain Control Module software update). Immediately following this software flash, the transmission's shifting logic became severely corrupted and unsafe to drive. The vehicle currently acts as if it has completely lost 2nd gear, experiences a severe lag when shifting up into 6th gear, and repeatedly fails to lock itself into 3rd, 4th, or 5th gears. The dealership is currently using a temporary lack of hard Diagnostic Trouble Codes (DTCs) to deny coverage for an internal physical lead frame component replacement under the 26S28 extended warranty guidelines, claiming instead that a complete, out-of-pocket transmission replacement assembly is required. The safety update has directly induced a severe driving hazard, leaving the vehicle unable to properly find or maintain standard highway gears.
Power train, Aug 27, 2026
The contact owns a 2016 Ford F-150. The contact stated that the vehicle was taken to a dealer to be serviced under NHTSA Campaign Number: 26V237000 (Power Train). The vehicle was not experiencing any failure prior to the recall repair; however, after the recall repair was completed, the transmission started downshifting roughly and would not shift beyond second or third gear, creating a severe road hazard while driving on the highway. The vehicle was driven to the contact's residence. The dealer was notified of the failure but informed the contact that the issue could not be resolved. The vehicle was not repaired. The manufacturer was notified of the failure and advised the contact to reach out to the dealer; however, the dealer was unwilling to assist. The failure mileage was 200,000.
Power train, Aug 27, 2026, crash
The contact owns a 2016 Ford F-150. The contact stated that while driving at approximately 30 MPH, the vehicle hesitated to maintain acceleration while the accelerator pedal was depressed, which caused the vehicle to jerk forward into the rear bumper of another vehicle in traffic. The front bumper struck the rear bumper of the other vehicle. A warning message reading "Cannot Exceed 80 MPH" and an additional unknown warning message were displayed. The air bags did not deploy. No injuries were reported. A police report was not filed. The vehicle was taken to an independent mechanic, where the front bumper was replaced at the contact's expense. The vehicle was later repaired under NHTSA Campaign Number: 26V237000 (Powertrain); however, the repair failed to prevent the failure from recurring. The vehicle was taken back to the same dealer, where it was determined that the vehicle needed further diagnostic testing for a possible transmission repair. The vehicle was not repaired due to cost and remained at the dealer. The manufacturer was notified of the failure. The failure mileage was approximately 88,000.
Power train, Aug 26, 2026
Vehicle transmission downshift to a lower gear while traveling at city and highway speeds without any prior warning or driver input. Diagnostic showed codes P0715 and P0717. The following day we received notification from Ford of the recall "Transmission molded leadframe replacement" (Campaign 26N04)" - which was investigated by NHTSA as part of Part 573 Safety Recall Report 26V237. When we spoke to our local dealership in [XXX] they felt it was the same issues as the recall describes. However, when we submitted the vehicle for repairs, they reported that these specific diagnostic codes (P0715 and P0717) are NOT considered part of the recall and are therefore NOT covered by the recall. But the repair needed for our codes are the SAME remedy as recall indicates. So, we are left with out-of-pocket expenses of over $2,000 because the code is one digit off. We would like to confirm with the NHTSA if these codes are actually covered, and if not, WHY? Our vehicle is experiencing the exact same issues as reported in your evaluation and my [XXX] old son is not safe in this vehicle. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Power train, Aug 21, 2026
My truck at 45 mph suddenly downshifted to first gear. It locked my tires causing me to fish tail. Luckily I lost control beside a shoulder and not into a ditch or another vehicle. I was near my home and turned onto a country road and was able to drive 20 mph or less to get it home. It is due to a recall that currently has no clear repair. Ford is aware of this issue and has done next to nothing to assist me. I have no vehicle and have not had one for nearly a month. The service team manager called to tell me the parts were not available but are ordered. He also mentioned his mechanics were afraid to drive my truck from the lot to the garage because the truck is acting so erratically. There is no way this should not be addressed. I’ve only been asking for Ford to do the right thing. They’ve done nothing. It is dangerous I could have been killed in an accident because of this. My truck could have also fish tailed into oncoming traffic endangering others as well. I am not sure what else can be done. I’m out of options. Ford has refused to give me a loaner vehicle or pay for a rental due to company policy. I’m looking for any assistance at this point. I look forward to hearing your thoughts.
Power train, Aug 21, 2026
The contact owns a 2016 Ford F-150. The contact stated that while operating the vehicle, the vehicle lunged forward. Additionally, while attempting to slow down to stop the vehicle, the transmission unexpectedly downshifted while driving. The vehicle was taken to the local dealer and serviced under NHTSA Campaign Number: 26V237000 (POWER TRAIN). After retrieving the vehicle, the vehicle lunged forward and independently accelerated, and the transmission failed to properly shift into the intended gear. During the failures, the vehicle was restarted, and the failure was self-corrected. The cause of the failures was not yet determined. The manufacturer and local dealer were notified of the failures, but no assistance was offered. The contact was later sent a letter from the manufacturer stating that additional service to the powertrain leadframe might be needed after the recall remedy was performed. The contact was informed that the additional service was not covered under the recall. No additional information was available. The failure mileage was 148,000.