2014 Jeep Wrangler
Problems, recalls and owner-reported issues
Engine is the leading concern among 654 owner complaints filed for this model year. This is the 9th highest complaint count among 26 Wrangler model years with reports.
Of the 2014 reports, 21 involved a crash and 24 involved a fire. 13 people were injured.
What owners report most often
Recalls and investigations
Seat belts, front, anchorageSep 26, 2019
Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.
Campaign 19V680000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 15, 2019
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Campaign 19V018000 on NHTSA.gov
Air bags, frontal, driver side, inflator moduleMay 11, 2016
Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.
Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.
Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.
Campaign 16V288000 on NHTSA.gov
Tires, pressure monitoring and regulating systemsOct 8, 2014
Chrysler Group LLC (Chrysler) is recalling certain model year 2014 Chrysler Town and Country and Dodge Grand Caravan vehicles manufactured March 20, 2014, to April 22, 2014, and 2014 Jeep Wrangler vehicles manufactured March 21, 2014, to April 22, 2014. Due to a software error, the Tire Pressure Monitoring System (TPMS) may fail to learn the locations of the individual sensors while the vehicle is being driven. As a result, the low tire pressure warning light will illuminate, despite the the tire pressures being within specification. Should one of the tires lose air pressure, the driver would not be notified of the change in air pressure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 138, "Tire Pressure Monitoring Systems."
If the TPMS light illuminates because the sensors cannot be located, it could mask an actual low tire pressure condition, possibly resulting in tire failure, increasing the risk of a crash.
Chrysler has notified owners, and dealers will reprogram the TPMS module, free of charge. The recall began on October 23, 2014. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P63.
Campaign 14V632000 on NHTSA.gov
Representative owner complaints: engine
330 reports, newest first. Show all
Engine, Feb 9, 2023, fire
Oil Filter Housing cracked. Oil pools on top of engine and under intake manifold. Oil runs down the right side of engine - taking out an oxygen sensor in the process as the wiring harness gets soaked in oil. Oil ran down onto transmission and exhaust manifolds creating odor and a lot of smoke - not to mention the oil all over my driveway and street. Evidently, this is a known problem to the manufacturer. It is reported hundreds of times on this site and thousands of times on various internet sites. Clearly there are manufacturing problems that are at fault and creating serious safety and economic impacts to owners. Research across various platforms indicates that it is not a matter of "if this will happen," but "when" it will happen. Where is the accountability to the manufacturer? Why is NHTSA NOT doing something to protect the consumer and the public?
Engine, Feb 8, 2023
Hello my jeeps oil filter housing has been repaired twice it's about 900 both times their needs to be a safety recall it smoke and causes alot of issues this is a poor design and needs attention my jeep is parked until further notice
Engine, Feb 3, 2023
Oil cooler cracked, very common with this engine. Needs to be a recall. My shop said they were doing around 2 a week? Poor design, plastic mounted to aluminum. It cost me $1285.00 to get this fixed. The engine only has 46000 miles on it. The vehicle has never been off-road and has the oil changed every 3000 miles.
Engine, Jan 21, 2023
The oil filter housing was cracked and leaking and replaced under warranty a few years back. The same problem is happening again because it is a plastic oil filter housing. Chrysler knows its a defective part. Make them issue a recall please We shouldn't have to pay 800 plus to have it fixed with the same defective part. They're profiting from their mistake.
Engine, Jan 16, 2023
The oil housing is leaking oil on the engine and exhaust it smells terrible when engine is on , maybe a risk of fire !! Looks like to be a well know important problem at jeep . There should be a recall!! Thx Looks like jerp want 1200$ to fix a known problem!
Engine, Dec 16, 2022
Oil cooler broke due to being made out of plastic. I had to have a new one installed made out of metal. Labor and parts were 855.00. I don’t think this should have happened both engine and driveway are covered in oil?
Engine, Dec 9, 2022
Warped and leaking oil filter housing. The housing is made of plastic and unsuitable for this use. Newer models they have corrected this and the housings are made of aluminum. Mine is plastic and very unsafe. Having leaking oil is an enviromental and safety hazard. Jeep refuses to repair this issue even though it is a well know problem for all Penstar engies with the plastic housing. The leaking housing was brought to my attention during a normal oil change.
Engine, Nov 30, 2022
I smell burning oil in my vehicle after short or extended drives and discovered that this issue was widely reported for 2014 Jeep Wanglers. The fumes have the potential to diminish my health and should be addressed immediately.
Engine, Aug 10, 2022
Greetings, My 2014 Jeep Wrangler has developed a ticking sound that is progressively getting worse. I have addressed this with my professional mechanic and noted to me after checking the engine that there is an issue with the engine and Chrysler knows about it yet no recall has been published. The issue has to do with the 3. 6l Pentastar engine is notorious for having a camshaft or lifter go bad. The answer is apparently to replace the headers. I have contacted Customer service at Chrysler and they are now claiming not to know about it. My mechanic stated that repairs can run about $2000. I would appreciate it if you would appropriately deal with this and inform me on the outcome. Thank you kindly, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Engine, May 26, 2022
At approx 45,000 miles the rocker arm bearing failed causing a ticking noise in the engine. Upon researching this issue, I have found multiple complaints and confirmation that this issue is due to poor manufacturing.
Vehicle speed control, Service brakes, Engine, May 16, 2022
The antilock brake module shorted out causing the line to melt and shut down my vehicle
Engine, Fuel/propulsion system, May 2, 2022
The vehicle stalls, losing power steering and brakes in the middle of the road. It is critical to have this addressed before someone dies in a wreck. It also over heats to the point it will catch on fire.
Engine, Apr 20, 2022
oil filter housing unit leaks oil causing fire hazard and engine seizure, had to have repaired 2 times in a one year period.
Engine, Apr 12, 2022
The contact owns a 2014 Jeep Wrangler. The contact stated that while the vehicle was running there was a ticking sound coming from the engine. The contact stated that there were no warning lights illuminated. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the engine needed to be replaced. The manufacturer was contacted and informed the contact that the vehicle was not covered under an unknown Extended Warranty. The contact was referred to NHTSA for assistance. The failure mileage was 98,000.
Engine, Mar 16, 2022
Oil cool on the top of the motor failed filling top of motor with oil and spilling over in back and front. This is a very common problem that should be looked at closer could easily get on exhaust causing a potential fire.
Engine, Mar 1, 2022
2014 jeep wrangler unlimited Sahara oil filter housing fail twice already. Causes oil to leak all over top of engine and then drips onto other components. Could cause fire, could cause engine to sieze, no warning lights to indicate an issue.
Engine, Feb 28, 2022
Engine oil cooler failed. No warning lights or chimes. Problem found by smell of burning oil covering the intake valley and drainage from there onto the exhaust pipe throughout the underside of the vehicle. Can result in a vehicle fire.This is a known problem with the 3.6l jeep engine. This is a costly repair and replacement part of OEM quality or better is difficult to locate because of so many failures.
Engine, Feb 24, 2022
Oil Filter Housing failed leaking oil onto top of motor and hot exhaust manifold nearly causing a fire and catastrophic engine failure in heavy traffic. Dealer has confirmed this is a known issue on the 3.6 pentastar engines from after 2014. Currently replacement part has a 58000 unit back order. Failed with no warning until oil light and temp lights triggered.
Engine and engine cooling, Feb 11, 2022, fire
The contact owns a 2014 Jeep Wrangler. The contact stated that the oil filter cap blew off the housing. As a result, the vehicle was losing oil. The contact noticed oil on the engine and smoke was detected. There were no warning lights illuminated. The vehicle was towed to the contact's residence. The contact called the local dealer. However, the vehicle was not diagnosed. The manufacturer was contacted but no further assistance was provided. The approximate failure mileage was 140,000.
Engine, Feb 11, 2022
After a short drive to town I could smell oil burning .. Oil was Pouring on the the ground from under my jeep. I was told from the dealer it is a common problem on that motor and it was the OIL COOLER . It was cracked on the plastic part . I had it repaired and it cost me 800$ . There were no warning lamps . If I did not catch the problem in time the motor would have locked up.. the oil hitting the hot manifold could have caught fire .
Engine, Feb 5, 2022
3.6l Pentastar V6, vehicle had a failed oil cooler housing. This caused the vehicle to leak a considerable amount (more than a quart) of oil into the valley between the cylinder heads, but showed no outward signs of leaking oil. This has the potential to ignite a vehicle fire during operation. Could also potentially cause catastrophic engine failure secondary to oil starvation at highway speeds.
Engine, Jan 9, 2022
Engine oil leak, front of engine, under/at bottom of oil filter housing. Loss of oil from motor, oil all over under carriage of Jeep, found first on garage floor. Jeep has 62,000 miles on it. Oil on engine, transmission, transfer case and exhaust. Unit smoking, fire hazard. No warning lamps for low oil or low oil pressure.12
Engine, Dec 28, 2021
Engine light on when change in oil needed @ 50%. Oil pressure fluctuates when driving 2% to 30%. Noticed oil leaks in my driveway and had it checked by mechanic. Found out it was the oil filter housing/oil cooler and that it is a common problem with 3. 6 motor also, found out the part is on back order due to a lot of customers having same issue. Found the following in my search: " ATTENTION - 2014 Wranglers have bad oil leak problems! ________________________________________ For 2014, Chrysler made a change to a part called the "oil filter adapter" which sits on top of the engine, under the intake manifold. There are now a parade of people with various Chrysler vehicles that use the 3.6L reporting that the new part cracks, causing a major oil leak, potentially a fire, and can cause your engine to be drained of all oil. If you have had an oil leak, and the dealership told you the issue was the oil filter adapter, the oil cooler or the oil cooler cover, post up here. We are going to try to get pressure on Chrysler to at least redesign the part. Part number is 68105583AA and it applies only to 2014 3.6L Chrysler V6 engines, at least so far. Similar issues have been reported with the new 3.2L V6 used in the Cherokee, but it apparently has a different part number. This is a MAJOR issue if you own a 2014 Wrangler. There is no way to know if/when the part will crack, and if it does, it is not a trail repair. The adapter is buried under the intake manifold, and ever getting to it with some putty would be nearly impossible. You had better have extra oil with you at all times if you are trail riding a 2014 Wrangler. Post here if you have the issue, and go to safercar.gov and file a complaint. If Chrysler doesn't fix this issue, you will never feel safe wheeling your 2014 Jeep in the backcountry. They need to fix this, NOW. ALL 3.6L vehicles are affected"
Engine, Dec 19, 2021
Concerning all Jeep Wrangler vehicles with the Pentastar 3.6L V-6 engine. These engines utilize variable valve timing with DOHC’s. Jeep dealers and owners are aware of a very common issue with bearing failures in these assemblies, resulting in damage to the camshafts requiring replacement of all 4 camshafts, 24 hydraulic lifters and 24 rocker assemblies. Approximate labor for this work is $1,220 plus parts cost of approximately $2,770. The issue is signaled by a loud tapping noise from one or both engine banks and typically occurs around or shortly after 80,000 miles though there are a number of reports that can be found where this issue appeared earlier. Jeep technicians diagnose the issue using a stethoscope and automatically assume all components will require replacement without further disassembly or investigation. An internet search will indicate just how prevalent this issue is. My vehicle is currently in the shop and I am told there are currently a total of three Jeep Wrangler Unlimited vehicles in said shop with the SAME issue.
Engine, Dec 8, 2021
Smelled burning oil coming from the engine bay. Noticed a large amount of oil under the engine. Inspected the engine bay and there was a pool of oil under the oil filter housing. There was no CEL or warning. Checked oil and it was over a quart low. Oil spill under vehicle was large and dissipated in a wide area. A quick web search shows this is a common issue on the Chrysler Pentastar 3.6 engine. It is the OIL COOLANT HOUSING ASSEMBLY which is faulty. This causes oil to spill out and drip on the transmission and exhaust which causes the oil burning smell. There was a backorder on this part and I was informed that over 65K parts were manufactured and sold this past year which demonstrates that this is a known issue. Attempted to have dealership repair but could not book a date for months due to backlog and lack of availability. Took the vehicle to an independent shop that was very familiar with the issue and confirmed it was the oil coolant housing assembly without me mentioning what I thought it was. This was a $975 repair. Contacted manufacturer and they said they could not assist me as I need to take the vehicle to the dealership (only). However, I can't be without my vehicle for 60 days until they are able to "fit me in". Concerned about the burning of oil on the exhaust from a safety/fire perspective.