2018 Jeep Wrangler

Problems, recalls and owner-reported issues

Steering is the leading concern among 1,822 owner complaints filed for this model year. This is the highest complaint count among 26 Wrangler model years with reports.

Complaints by model year
  1. 1,822

Of the 2018 reports, 22 involved a crash and 25 involved a fire. 13 people were injured.

Primary concernSteering1,116 reports · 61% of complaints
Owner complaints1,822Filed with NHTSA
Recall relationship14 safety recallsNHTSA campaign records

What owners report most often

  1. Steering1,116
  2. Suspension342
  3. Electrical system267
  4. Other or unspecified212
  5. Power train176
  6. Engine99
  7. Structure97
  8. Service brakes67

Recalls and investigations

  1. Back over prevention, sensing system, cameraSep 12, 2024

    Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."

    A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

    Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.

    Campaign 24V676000 on NHTSA.gov

  2. Electrical system, instrument cluster/panelSep 5, 2024

    Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

    An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

    Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

    Campaign 24V652000 on NHTSA.gov

  3. Power train, clutch assemblyFeb 23, 2023

    Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

    Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

    Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.

    Campaign 23V116000 on NHTSA.gov

  4. Power train, clutch assemblyJan 28, 2021

    Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

    Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

    FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.

    Campaign 21V028000 on NHTSA.gov

  5. Power train, clutch assemblyMar 3, 2020

    Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

    The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

    Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

    Campaign 20V124000 on NHTSA.gov

  6. Seat belts, front, anchorageSep 26, 2019

    Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

    A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.

    FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.

    Campaign 19V680000 on NHTSA.gov

  7. EquipmentApr 23, 2019

    Erwin Hymer Group USA LP dba American Fastbacks (EHGUSA-AF) is recalling certain 2018 Jeep Wrangler vehicles sold with a roof top tent installed. The top cover of the roof top tent may crack or break, possibly resulting in the cover detaching from the vehicle while moving.

    If the roof top tent cover detaches from the vehicle while moving, it can create a road hazard, increasing the risk of a crash.

    The remedy for this recall is still under development. The recall began May 9, 2019. Owners may contact American Fastbacks customer service at 1-844-533-7997 extension 301. Note: Vehicles in this recall are also included in recall 19V-190.

    Campaign 19V320000 on NHTSA.gov

  8. Latches/locks/linkages, doors, latchNov 8, 2018

    Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler four-door vehicles. The right rear passenger door latch may not be in the correct location, possibly preventing the door from latching properly.

    If the right rear passenger door opens unexpectedly, it can increase the risk of injury.

    Chrysler will notify owners, and dealers will repair the right rear door latch reinforcement, free of charge. The recall begin December 6, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UB6.

    Campaign 18V786000 on NHTSA.gov

  9. Structure, frame and membersSep 28, 2018

    Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

    An unexpected reduction in steering ability, can increase the risk of a crash.

    Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.

    Campaign 18V675000 on NHTSA.gov

  10. Electrical system, wiring, front underhoodAug 9, 2018

    Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.

    A vehicle stall can increase the risk of a crash.

    Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.

    Campaign 18V524000 on NHTSA.gov

  11. SteeringMay 25, 2018

    Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The intermediate steering shaft may not have been properly welded causing a split where the external spline is formed.

    If the weld seam splits, the steering wheel may lose center positioning causing a loss of steering responsiveness and increasing the risk of a crash.

    Chrysler will notify owners, and dealers will inspect and, as necessary, replace the intermediate steering shaft, free of charge. The recall began June 21, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U48.

    Campaign 18V343000 on NHTSA.gov

  12. Electrical system, wiringMay 17, 2018

    Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

    If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

    Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

    Campaign 18V332000 on NHTSA.gov

  13. Power train, automatic transmissionMay 1, 2018

    Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.

    If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.

    Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U43.

    Campaign 18V280000 on NHTSA.gov

  14. Structure, frame and membersApr 12, 2018

    Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The rear under body ladder rail may corrode, possibly reducing the strength of the rear floor pan and causing the left rear seat mount to become loose.

    If the floor pan strength is reduced and/or the rear seat mount becomes loose, the rear seat may detach in a crash, increasing the risk of injury.

    Chrysler will notify owners, and dealers will inspect and, as necessary, coat the interior and exterior of the driver's side rear underbody ladder rail with three-part rust protection. The recall began September 11, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U27.

    Campaign 18V231000 on NHTSA.gov

Representative owner complaints: engine

102 reports, newest first. Show all

  1. Engine, Sep 18, 2026

    Misfire no. 4cylinder due to head gasket leak and coolant leaking into cylinder.

  2. Engine and engine cooling, Sep 17, 2026

    See attached document for complaint.

  3. Engine, Fuel/propulsion system, Jul 13, 2026

    I purchased this 2018 Jeep Wrangler JK Unlimited on July 19, 2025. Since purchasing the vehicle, I have experienced repeated mechanical failures that have required multiple repairs. The most serious issue involves the engine overheating at highway speeds without any visible coolant leak or clearly identifiable cause.Despite seeking professional diagnosis, the source of the overheating could not be determined. Shortly afterward, the vehicle developed a P0302 (Cylinder 2 Misfire), raising concerns about possible internal engine damage caused by the overheating.I believe this presents a significant safety hazard. An engine that overheats unexpectedly while driving at highway speeds can lose power or fail without warning, creating a dangerous situation for the driver and surrounding traffic. The vehicle has become unreliable and unsafe to operate because I cannot predict when it may overheat or experience another engine failure.As someone who often drives alone, I no longer feel safe taking this vehicle on long trips. I am concerned that the vehicle could leave me stranded on a highway or in a remote location without warning, placing my personal safety at risk. A vehicle should provide dependable transportation, not expose its occupants to the possibility of sudden mechanical failure.This vehicle has spent more time in repair facilities than on the road. I have incurred thousands of dollars in repair expenses, and I am now being asked to pay for an engine teardown simply to determine the cause of the failure before any warranty consideration can be made. Despite multiple repair attempts, the underlying cause of the overheating and engine problems has not been resolved.I am submitting this complaint because I believe the repeated overheating, unexplained engine malfunction, and resulting cylinder misfire may indicate a safety-related defect that warrants investigation. I request that the review to determine whether similar failure whether a broader safety issu

  4. Electrical system, Other or unspecified, Engine, Jun 22, 2026, fire

    What component or system failed or malfunctioned, and is it available for inspection upon request? Jeep started on fire and is still at a tow yard in Belchertown, MA How was your safety or the safety of others put at risk? The Jeep started on fire while I was driving. I pulled over as the engine was smoking and then it burst into flames while I was still inside. Has the problem been reproduced or confirmed by a dealer or independent service center? Not that I know of. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Yes, we gave permission for our insurance agency and Jeep to inspect the burned out vehicle. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? While I was driving, the engine temp and coolant warning lights shot way up and then the engine began to smoke. I pulled over and before I could exit the vehicle, fire was coming into the cab through the air vents.

  5. Engine and engine cooling, Power train, Jun 10, 2026

    The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the steering wheel seized and the vehicle failed to accelerate. The electronic parking brake, check engine, and several other unknown warning lights were illuminated. The contact shifted to park (P) and then drive (D) and was able to continue driving. The vehicle was taken to the dealer, who was unable to duplicate the failure. The vehicle was taken to an independent mechanic, who determined that coolant had leaked into the computer and damaged the battery pack control module. The mechanic related the failure to Customer Satisfaction Program: Y40 (Control Module Software Updates); however, the VIN was not included. The vehicle was then towed to an unknown dealer; however, the vehicle was not yet diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 100,000.

  6. Engine, May 22, 2026, crash

    Was stopping at red light. Got to about 5mph when Jeep accelerated to about 35mph. I was standing on the breaks but the Jeep kept accelerating until impact struck the car in front me which was stopped. I have video.

  7. Steering, Electrical system, Engine, May 18, 2026

    I bought this vehicle used in 2022 from CarMax. According to Jeep (Stellantis) Co. multiple recalls were fixed by the previous owner, but the patch available for 2018 Jeep Wranglers was not done. In 2024 my iphone and Mac laptop were hacked and shortly after I began having problems with my 2018 Jeep Wrangler. My alarm system started going off while I was in my home without touching or being near the FOB. When I used my FOB to unlock the doors, they would lock back before I could open the door. I was unable to use the push button start for a few minutes up to 15 minutes and in 2025 I was unable to use the push button at all on most days. I had to research a work around to be able to start my Jeep and even after that depending on the day, it takes several seconds to minutes to start it this way. On 2 different occasions as I was driving, I had no control over my steering for approx. 10 seconds. I held on to the wheel and slowed down. The control returned and I was able to drive home. I researched and found out that 2014-2018 had reports of hacking and the hacker taking control of the vehicle in multiple ways including steering, brakes, alarm system, and hacking FOB. My radio has been turned off and the stations changed. One of my FOBs was tampered with, including switching the lock and unlock button's capability, panic button was disabled, and now the FOB does not work at all. There is a loud grinding noise behind my glove box that can be heard at different times including when Jeep is turned off. Loud noises that sound like a rock hitting the window happen randomly to my front windshield, driver and passenger windows happens multiple times while I am driving and when vehicle is turned off. I took Jeep to a trusted mechanic and was told there was no way to tell and it would be better to just sell it. After I moved, I didn't experience these problems for a while, but am experiencing them again. I am concerned for my safety and anyone who may be a passenger in my Jeep.

  8. Engine, May 17, 2026

    Engine - The vehicle is available but the engine was replaced. I was able to get home however there was a potential for significant engine failure. Yes it was inspected by an independent service center. Yes it was inspected by an independent service center. A check engine light came on. Upon further inspection it was a Cylinder 6 misfire P0306. When the engine was inspected further by a mechanic it was determined that the cylinder wall was damaged and that coolant had entered the cylinder. Due to the extent of the engine damage the engine needed to be replaced.

  9. Engine, May 16, 2026

    Oil cooler failure at 7 years and 90000 miles. This is a known engineering issue due to a plastic housing that is resolved by upgrading the oil cooler housing to aluminum instead of plastic. It’s a $1000 repair. Because this is an engineering issue the consumer should not have to pay the entire cost of the repair. This is a SAFETY AND ENVIRONMENTAL HAZARD DUE TO THE LEAKAGE OF OIL CAUSED BY THIS FAILURE. It should definitely be deemed a recall and fixed at the expense of the manufacturer!

  10. Engine, Apr 20, 2026

    On March 19, 2026 I paid $5,778.87 for repairs to my 2018 Wrangler JL. Repairs included the replacement of warped cylinder head and failed head gasket with coolant getting into the combustion chamber, showing up as rough running, misfire, flashing check engine light, and burning coolant smell. On April 18, 2026, at approximately 10:30 pm, after attending the [XXX] concert at Bank of America stadium (+70,000 in attendance), the vehicle stalled and was unable to be restarted or moved to the shoulder of the highway. The vehicle failure occurred on I277 outside of Bank of America Stadium with hundreds of cars passing us as my wife and were stranded in the middle lane. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

  11. Engine, Apr 19, 2026

    I have a 2018 Jeep Wrangler JL Sport S (2 door) with approximately 66,000 miles. On March 26th, 2026 I had a flashing check engine light come up along with the vehicle shaking in low gears. I had the vehicle towed to the Jeep dealership (Gandrud Auto Group) from which I bought it from and upon their inspection they found the left bank head gasket leaking coolant into the combustion chamber causing misfires. This repair was over $5000 and took over a week to fix. The service ticket from Grandrud will be attached which lists all parts that needed to be replaced. This vehicle is much too new to be having these kinds of issues and Gandrud even stated that many customers with JL Wranglers have been coming to them with the same issue of the head gasket failing. 1. Left bank head gasket leaking coolant into the combustion chamber causing misfires. Photos will be attached. 2. Shaking vehicle. Had vehicle towed. 3. Dealership inspected and identified the issue. Invoice attached. 4. Check engine light came on for just one day back in December of 2025, was brought into Gandrud and it was a misfire code, no noticeable issues at the time however and check engine light went away. On March 26th, 2026 I had a flashing check engine light come up along with the vehicle shaking in low gears.

  12. Power train, Engine, Fuel/propulsion system, Mar 30, 2026

    The vehicle is a 2018 Jeep Wrangler with a 3.6L engine and approximately 124,000 miles. The engine has experienced a failure involving multiple components, including suspected head gasket failure, significant oil loss with no visible external leak, low oil pressure, and engine knocking. Diagnostic trouble codes P0365 and P06DD were present, indicating camshaft position sensor issues and oil pressure control failure. The vehicle is available for inspection upon request. This condition creates a safety risk due to the potential for sudden engine failure and loss of power while driving, which could occur without warning and increase the risk of an accident. The problem has been confirmed by an independent repair facility, which identified low oil levels, coolant loss, and symptoms consistent with internal engine damage. The vehicle has not been inspected by the manufacturer. Prior to the failure, warning signs included a low oil pressure condition and engine performance changes. These symptoms developed rapidly over a short period of time. The vehicle is currently not safe to operate due to the risk of further engine damage or sudden failure.

  13. Electrical system, Traction control system, Engine, Feb 24, 2026

    The contact owns a 2018 Jeep Wrangler. The contact stated that while her son was driving approximately 70-75 MPH, the vehicle stalled. The check engine and traction control warning lights were illuminated. Upon research, the contact associated the failure with NHTSA Campaign Number: 18V524000 (Electrical System). The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 138,000.

  14. Other or unspecified, Engine, Feb 19, 2026

    My 2018 Jeep Wrangler JL only now has 77,700 miles and got a blown head gasket!? This is so UNACCEPTABLE! Makes me regret ever purchasing! There is a ton more with same issue some with less miles and has been well maintained. Took to the dealer is who diagnosed and supposedly repaired due to a warranty that I am having to pay BIG money for! Alos, UNCALLED FOR! Took to dealer when Aux light first appeared but then eventually the engine light came on and I took to dealer and that's when diagnosed this! VERY VERY UPSETTING AS warranty should not have to cover not to mention, HOW DO YOU STOP FROM HAPPENING in ANOTHER 70000 or less miles? JEEP NEEDS TO BE RESPONSIBLE AND STEP UP BIG AND DO SOMETHING REGARDING THIS PROBLEM THAT IS THERE PROBLEM!

  15. Power train, Engine, Jan 29, 2026

    Vehicle equipped with a 3.6L Pentastar V6 engine developed loud ticking noises, engine misfires, and loss of power while driving. The vehicle hesitated during acceleration and could not reliably maintain speed, creating a safety risk in traffic. An authorized dealership pulled diagnostic trouble codes, acknowledged the abnormal ticking, and advised the failure was likely related to the camshaft, lifters, and rocker arms. The vehicle was then taken to an independent mechanic for further inspection. The independent mechanic confirmed failure of the valve train and camshaft components, requiring replacement of the passenger side intake camshaft (Bank 2), cam phaser, phaser bolt, and all lifters and rocker arms. Photos of the failed components are available. The defect was confirmed by both a dealership and an independent repair facility. Issue presents risk of sudden loss of power while the vehicle is in motion.

  16. Engine, Jan 15, 2026

    On January 14, 2026, my 2018 Jeep Wrangler JK Sport (3.6L) with approximately 134,099 miles was inspected at Cox’s Automotive & Repair Inc. due to a check engine light and rough engine operation. During diagnostic testing, multiple fault codes were identified, including P000A (camshaft position slow response), P0300 In addition to the diagnostic findings, I contacted and visited multiple automotive repair facilities regarding this issue. Each shop advised that they have previously serviced 2018 Jeep Wrangler JK models with the same 3.6L engine presenting identical symptoms and diagnostic codes, including timing correlation errors, misfires, and internal engine damage. Several repair facilities indicated that they have had the same make and model in their shops for the same failure, including vehicles with significantly lower mileage, with one reported case occurring at approximately 7,000 miles. Based on consistent feedback from multiple independent repair facilities, this condition appears to be a known and recurring mechanical issue associated with this vehicle model, rather than damage caused by misuse, neglect, or owner fault. (random/multiple cylinder misfires), P0017 and P0019 (camshaft/crankshaft timing correlation errors). Upon removal of the oil filter, metal debris was found in the oil filter cartridge, indicating possible internal engine damage. Based on these findings, the repair facility recommended engine replacement or major engine repair.

  17. Engine, Jan 6, 2026

    What component or system failed or malfunctioned, and is it available for inspection upon request? THE THROTTLE FAILED ON THE FREEWAY DUE TO A BREAK IN THE ENGINE HARNESS. HAVE FULL REPAIR RECEIPTS FROM SHOP. How was your safety or the safety of others put at risk? FULL ENGINE AND THROTTLE FAILURE ON FREEWAY MULTIPLE TIMES, 1X ON A STRETCH OF FREEWAY WITH LITTLE TO NO SHOULDER WITH MY 1 YEAR OLD IN THE BACK SEAT. Has the problem been reproduced or confirmed by a dealer or independent service center? YES, FULL SERVICE REPAIR RECEIPTS ON HAND. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? YES Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? NO

  18. Steering, Vehicle speed control, Engine, Jan 3, 2026

    The jeep lost power while I was driving. The lights stayed on but jeep came to a stop. I touched the key area and it started running again.

  19. Engine, Dec 2, 2025

    Started having misfire issues. Replaced spark plugs. problem continued. started having to add antifreeze regurlarly. 1 quart per 300 miles. multiple P0302 error codes. Dealer 1st tried to tell me was a loose coil pack. looked at it again and said needs a new head gasket possibly a whole new engine. 117,000 miles and this seems rediculous for a 60,000 dollar vehecle. Especially since Jeep already issued an extended 150,000 mile warranty for 2011-2013. with 100's of these same issues still happening on 2018's and latter they clearly did not correct the defect.

  20. Engine, Oct 31, 2025

    The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle stalled, and the engine seized. In addition, the contact stated that several unknown warning lights were illuminated. The contact stated that the failure had occurred while driving on a busy highway full of traffic and tractor-trailers. The contact stated that the vehicle was stuck in an unsafe location, in the middle of the highway. The contact exited the vehicle, trying to get to a safe area, onto the shoulder of the road. The contact stated that the grounds were icy and snowy. The contact stated that while crossing the highway on foot, trying to get to the shoulder of the road, the contact fell. The contact was transported to the local Medical Center by ambulance. The contact sustained a fractured left leg and fractured left knee. The contact stated that medical treatment was ongoing. The vehicle was towed to the dealer, where the vehicle was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. In addition, the contact stated that the failure occurred a month after the vehicle was purchased. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,000. The VIN was unavailable.

  21. Electrical system, Engine, Oct 29, 2025

    On August 6, 2025, while driving at approximately 65 mph on the highway, the vehicle experienced a sudden and total loss of motive power. The engine warning lights illuminated, and the vehicle would not accelerate, forcing an emergency maneuver across multiple lanes of traffic to reach the shoulder. This failure occurred just one day after a warranty repair for the same issue, and followed a previous 199-day repair for a known camshaft defect. This sudden power loss in highway traffic created an extreme and unreasonable risk of a high-speed collision and serious injury.

  22. Steering, Electrical system, Engine, Oct 26, 2025

    Continuous engine problems Says not in park/ is in park Clicking sounds when turned off Steering wheel won’t lock Will turn over but won’t start even tho all lights come on and air All lights will turn off when brake is pressed and when foot is off brake the lights will flash and the car will beep continuously All lights in gear will be lit up orange but can’t move it

  23. Engine, Oct 23, 2025

    My Jeep began misfiring, giving a P0304 error code via the ODB. On June 2nd 2025, we took it to the Sandy Sansing CDJR Dealership. They determined that my 3.6L Pentastar V6 engine needed a new camshaft and lifters, despite having only 42,609 miles on it. To further complicate things, it took the dealership over a month to get a replacement camshaft in and installed, due to an abnormally high demand for replacement camshafts; this suggests a systemic problem with the engine, especially considering the problematic history of earlier versions of the 3.6L Pentastar V6 (1). https://static.nhtsa.gov/odi/tsbs/2014/MC-10069161-0335.pdf

  24. Engine, Oct 23, 2025

    The Check Engine light illuminated and diagnostic code P219A was recorded (Bank 1 Air/Fuel Ratio Imbalance), and the engine has a ticking noise. The dealership has indicated the issue likely involves the valvetrain/rocker arms/lifters and will require engine internal repair (valve cover removal, spark plug replacement, possible rocker arm replacement) estimated at ~$2,900-$4,500. The 3.6 L Pentastar engine has been the subject of numerous owner complaints of ticking noise, power loss, misfire, and premature valvetrain failure. I understand there have been related Jeep Technical Service Bulletins (such as 09-002-14 and 09-008-18) addressing these types of failures. A class action lawsuit (Maugain et al. v. FCA US LLC) alleges defects in the 3.6L Pentastar engine’s valve train (rocker arms, lifters) and failure to disclose the defect. Maintenance History: Regular oil changes (every <6,000 miles) at approved service centers; no prior major engine internal repairs. Concern: The defect affects engine performance, may lead to catastrophic engine failure, and potentially reduces safe vehicle operation and control (power loss, hesitation). Relief Sought: I request the NHTSA open a vehicle safety defect investigation and compel FCA / Chrysler / Jeep to evaluate this condition under recall criteria.

  25. Engine, Sep 26, 2025

    The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle hesitated and failed to accelerate as intended while depressing the accelerator pedal. The check engine warning light was illuminated. In addition, the vehicle failed to accelerate while driving uphill or downhill. The vehicle was taken to the dealer, where the catalytic converter was replaced. After several more tests on the vehicle, it was determined that there was a leak in the engine block, and that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 98,000.