2019 Jeep Wrangler
Problems, recalls and owner-reported issues
Steering is the leading concern among 741 owner complaints filed for this model year. This is the 6th highest complaint count among 26 Wrangler model years with reports.
Of the 2019 reports, 9 involved a crash and 10 involved a fire. 8 people were injured.
What owners report most often
Recalls and investigations
Back over prevention, sensing system, cameraSep 12, 2024
Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.
Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.
Campaign 24V676000 on NHTSA.gov
Electrical system, instrument cluster/panelSep 5, 2024
Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.
Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.
Campaign 24V652000 on NHTSA.gov
Power train, clutch assemblyFeb 23, 2023
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Campaign 23V116000 on NHTSA.gov
Power train, clutch assemblyJan 28, 2021
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Campaign 21V028000 on NHTSA.gov
Seat beltsSep 24, 2020
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Campaign 20V580000 on NHTSA.gov
Back over prevention, sensing system, cameraSep 10, 2020
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
The lingering rearview image can distract the driver, increasing the risk of a crash.
Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
Campaign 20V191000 on NHTSA.gov
Power train, clutch assemblyMar 3, 2020
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
Campaign 20V124000 on NHTSA.gov
SteeringMar 14, 2019
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.
If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.
Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.
Campaign 19V201000 on NHTSA.gov
Structure, frame and membersSep 28, 2018
Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.
An unexpected reduction in steering ability, can increase the risk of a crash.
Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.
Campaign 18V675000 on NHTSA.gov
Representative owner complaints: steering
445 reports, newest first. Show all
Steering, Electrical system, Service brakes, Sep 9, 2026
While driving my 2019 Jeep Wrangler, the vehicle suffered a major electronic/CAN-network failure. Service Shifter, ABS and ESC warnings appeared, the wipers activated on their own, controls malfunctioned, and power-steering assistance failed while the vehicle was moving, making it extremely difficult to steer. My two young children were in the vehicle. Jeep dealer diagnostics showed widespread communication faults involving steering, ABS/brake, transmission and other control modules. The dealer replaced the power-steering assembly and RF Hub, but the problem remains. On the first drive after repair, the ABS and ESC warnings repeatedly flashed on and off at highway speed. Interior lights are also flickering. I am concerned another network failure could again disable steering assistance or compromise ABS/braking-related safety systems and cause loss of vehicle control or a crash.
Steering, Electrical system, Engine, Sep 7, 2026
2019 Jeep Wrangler JLU experienced intermittent CAN-C communication failure. Vehicle has repeatedly experienced simultaneous loss of multiple electronic systems. On September 7th 2026, while driving, vehicle unexpectedly lost electric power steering, windshield wipers activated without command, ABS/TPMS/ESC warning lights illuminated, and vehicle subsequently would not shift into gear after stopping at a traffic light. Hazard lights would not activate. After shutting vehicle off, vehicle would not enter ACC or restart normally. Opening driver’s door unexpectedly caused vehicle to enter ACC. Manipulating the CAN-bus wiring/STAR connector behind the glove box has historically temporarily restored normal operation. Vehicle has previously required repair to this wiring/connector, and the failure has recurred. This has been occurring for at least 3 years and since 60,000 miles. This presents a significant safety hazard because steering assistance, shifting/propulsion, and signaling were simultaneously affected while driving. It is a known Chrysler issue (FCA STAR Case S2108000146) and should be recalled as there is a CLEAR and present danger with this ongoing issue.
Steering, Sep 2, 2026
Getting the well know Jeep "Death Wobble". Was advised by Carvana when I bought this vehicle that it had an open recall for this exact issue (Manufacturer Recall Number CDJR XF1) due to the Steering Damper having air in it. However, when I contacted a Jeep dealership to get it fixed, I was told there is no recall for the Steering Damper for my specific vehicle. When I look it up on NHTSA, there isn't a recall listed on here either. Whenever I hit transitions in the pavement while driving above 50mph, I get the death wobble on the front of the vehicle. I have not yet had it repaired, but I plan to do so regardless of whether a recall exists. This is clearly an affected vehicle that was wrongly excluded from the manufacturer's recall for the Steering Damper on vehicles manufactured prior to August 11, 2020. My vehicle was manufactured in April 2019, so it is definitely in the correct date range, and with the exact same issue of others that were recalled. The only reason I have not crashed is because I've taken EVOC classes (for driving firetrucks and ambulances), and I am able to control it when it does happen. There were approximately 65k miles on the vehicle when I bought it, and there is about 72k miles now. It has been happening since I bought it in December 2025 from Carvana.
Steering, Electrical system, Service brakes, Aug 18, 2026
Check engine, ABS, Service Shifter suddenly pops up and the steering was hard to turn almost had an accident
Steering, Jul 22, 2026
The contact owns a 2019 Jeep Wrangler. While the contact's daughter was driving at an undisclosed speed, the heated steering wheel feature was enabled; however, the heated steering wheel feature failed to function as intended. In addition, the contact became aware of a burning odor. The contact deactivated the heated steering wheel feature. The vehicle was taken to the dealer, where it was diagnosed with interior melting of the steering wheel. The contact was informed that the steering wheel and the steering wheel housing needed to be replaced. The vehicle was not repaired. The contact was informed that the parts were ordered. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 71,663.
Steering, Electrical system, Jun 25, 2026
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle stalled. The contact pulled over and waited for several minutes before restarting the vehicle. The vehicle was taken to the dealer, who replaced the wiring harness, but the failure persisted with the speedometer and fuel gauge fluctuating and the instrument panel icons flashing. Additionally, the vehicle was jerking and experienced a loss of power steering assist while driving. The vehicle was jumpstarted. The vehicle was taken back to the dealer; however, the vehicle was not yet diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 82,000.
Steering, Electrical system, Forward collision avoidance, Jun 10, 2026
My speedometer blacked out couldnt see the fuel gage or speedometer. Light flickering, auto park engages, steering wheel locks up.
Steering, Electrical system, May 5, 2026
What component or system failed or malfunctioned, and is it available for inspection upon request? After diagnostics of multiple 'no communication' codes, it was determined that the CAN buss star connector was faulty. The part has been replaced, but is available for inspection. How was your safety or the safety of others put at risk? The malfunction caused repeated warning lights and loss of steering at unpredictable times. Luckily I was always able to put on my hazard lights and get out of the path of traffic. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes, a variety of warning lamps and messages over a period of 10-12 days, which would disappear after restarting the vehicle (restarting was necessary to get the steering working again). Messages such as traction control, auto on/off, and check engine light were a few different ones. They came and went so quickly it was hard to catch them all while I was focused on getting safely off the road.
Steering, Mar 4, 2026
Jeep Wranglers in the older/early models had aluminum steering steering boxes that would have excessive play do to thermal expansion. Jeep never made it recall but did provide a TSB NUMBER: 08-074-20 REV. B GROUP: 08- Electrical DATE: September 26, 2020. The TSB would recommend the aluminum steering box be replaced with a steel one. The issue is that many dealers refused to do the fix/change parts for free under or out of warranty. Its clearly an issue as later/newer models of the Jeep JL Wrangler started shipping with the steel steering box.
Steering, Feb 26, 2026
Since new Jeep has experienced "excess play in the steering" the Jeeps steering "wanders" and vehicle pulls to both the left and right. Steering wandering increases in hot temperatures and at higher speeds and becomes UNSAFE to operate the vehicle. When purchasing new, I noticed the "excess play in the steering", but was told by the Jeep salesperson that "that's how Jeeps drive" and "They do not drive like typical passenger vehicles". I did not take my Jeep in for service for this issue because the salesperson told me that this is how the vehicle is designed to drive. However, I recently found out that Jeep issued a Technical Service Bulletin #08-074-20 REV.B back on September 26, 2020 that addresses this issue of "excess play in the steering" and "wandering" and the TSB gives recommendations to fix the steering by installing a new and improved Steering Gear Box that is made from steel as opposed to aluminum. I took my Jeep into a Jeep dealership with regards to this issue. The Jeep dealership confirmed that I have the "old style" steering gearbox mentioned in Technical Service Bulletin #08-074-20 REV.B and recommended that I replace it with the new design as recommended by the TSB. I asked Jeep to repair by vehicle free of charge as this is a "known" issue on Jeep Wrangler JL 2018-2020 as described in the TSB, but Jeep refused to pay for the safetly modification to my steering, stating that I am "out of the warranty period". This is a KNOWN manufacture defect. Jeep installed inferior aluminum steering gear boxes on their Jeep Wrangler JL 2018-2020 and 2020 Jeep Gladiators and they have since upgraded that critical safety component to a "steel version." Jeep should without question issue a "recall" to fix all current Jeep owners 2018-2020 Wrangler JLs and 2020 Jeep Gladiators that have a faulty aluminum steering gear box and replace it with the upgraded steel version that fixes the "wandering steering" and "excess play in the steering".
Steering, Feb 12, 2026
The contact owns a 2019 Jeep Wrangler. While the contact’s wife was driving with the heated steering wheel activated, the driver attempted to adjust the steering wheel position, and suddenly an electrical short occurred, causing white smoke to come from the center of the steering wheel. The vehicle was immediately stopped, and the heated steering wheel and heated seats were deactivated. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure, but no assistance was offered. The failure mileage was 82,000.
Steering, Jan 24, 2026
My Jeep Wrangler when driving 65mph or higher starts to wooble making it very hard to control. Usually it happens when there is small bumps roughness in the road. This issue started since it got to the 22K miles.
Steering, Suspension, Wheels, Jan 22, 2026
I was driving on the interstate and when I went over a little bump my truck started to shake like it was going to loose control. I read up on this and people who own jeeps refer to it as the death waddle is there a recall on this issue.
Steering, Suspension, Electrical system, Dec 27, 2025
Concern: Suspension, steering, and electrical system malfunction Description of the Problem: While driving at highway speeds (approximately 75 mph), the vehicle experiences a wiggling or unstable sensation in the suspension, making the car feel unsafe. At the same time, the steering wheel becomes stiff and difficult to turn. Additionally, a warning message appears stating “Service Shifter.” When this occurs, the electrical system freezes, affecting vehicle functions. This electrical malfunction lasts for 1 to 2 days, during which systems do not respond properly before eventually resetting on their own. Safety Concern: The suspension instability, loss of steering responsiveness, and electrical failure at high speeds present a serious safety risk to the driver and others on the road. Request: Requesting a full inspection of the suspension, steering system, shifter system, and electrical components, including any sensors or modules that may be causing these failures.
Steering, Dec 10, 2025
Filing this complaint regarding a known safety defect affecting my 2019 Jeep Wrangler Sport - specifically the steering damper column defect commonly referred to as "Death Wobble." ISSUE: My vehicle experiences violent and uncontrollable steering wheel oscillation when hitting bumps or road imperfections at highway speeds (typically above 55 mph). This phenomenon causes the entire front end to shake violently, requiring me to immediately slow down to regain control of the vehicle. This poses an extreme safety risk to myself, my passengers, and other motorists. I believe my vehicle has an issue with steering damper failure - the exact same defect addressed in Customer Satisfaction Notification V41 issued by FCA in June 2019. THE PROBLEM: While FCA issued CSN V41 covering approximately 192,000 2018-2019 Jeep Wranglers for steering damper defects, however my VIN was excluded from this notification despite experiencing the identical safety defect. FCA selectively applied the remedy to certain VINs rather than addressing all affected vehicles from these model years. SAFETY CONCERNS: This defect creates loss of vehicle control at highway speeds, significantly increasing crash risk. The NHTSA investigation (PE19-012) identified frame weld quality deficiencies and steering-related defects in 2018-2019 Wranglers affecting approximately 270,000 vehicles. Multiple investigations have documented steering looseness, steering wobble/shimmy, and loss of steering control in these model years. MANUFACTURER REFUSAL: Despite the known defect and my vehicle exhibiting the exact symptoms addressed in CSN V41, I believe once I take it in for service, Jeep will refuse to repair this safety issue under warranty, forcing me to bear the financial burden for a known manufacturing defect. REQUEST: I request NHTSA investigate why FCA limited CSN V41 to select VINs when the defect clearly affects a broader population of 2018-2019 Wranglers.
Steering, Nov 28, 2025
I am filing this complaint regarding a known safety defect affecting my 2019 Jeep Wrangler Sahara (VIN: [XXX] ) - specifically the steering damper column defect commonly referred to as "Death Wobble." ISSUE: My vehicle experiences violent and uncontrollable steering wheel oscillation when hitting bumps or road imperfections at highway speeds (typically above 55 mph). This phenomenon causes the entire front end to shake violently, requiring me to immediately slow down to regain control of the vehicle. This poses an extreme safety risk to myself, my passengers, and other motorists. DIAGNOSIS: A certified mechanic has diagnosed my vehicle with steering damper failure - the exact same defect addressed in Customer Satisfaction Notification V41 issued by FCA in June 2019. THE PROBLEM: While FCA issued CSN V41 covering approximately 192,000 2018-2019 Jeep Wranglers for steering damper defects, my VIN was arbitrarily excluded from this notification despite experiencing the identical safety defect. FCA selectively applied the remedy to certain VINs rather than addressing all affected vehicles from these model years. SAFETY CONCERNS: This defect creates loss of vehicle control at highway speeds, significantly increasing crash risk. The NHTSA investigation (PE19-012) identified frame weld quality deficiencies and steering-related defects in 2018-2019 Wranglers affecting approximately 270,000 vehicles. Multiple investigations have documented steering looseness, steering wobble/shimmy, and loss of steering control in these model years. MANUFACTURER REFUSAL: Despite the known defect and my vehicle exhibiting the exact symptoms addressed in CSN V41, Jeep/Stellantis refuses to repair this safety issue under warranty, forcing me to bear the financial burden for a known manufacturing defect. REQUEST: I request NHTSA investigate why FCA limited CSN V41 to select VINs when the defect clearly affects a broader population of 2018-2019 Wranglers, and mandate a comprehensi INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Steering, Suspension, Nov 24, 2025
The steering wheel started to shake and then escalated to the whole car shaking at which time I had to stop the vehicle on the highway to make it stop shaking. This isn’t the first time this has happened.
Steering, Oct 14, 2025
The problem occurs in my 2019 Jeep Wrangler, suddenly, typically after hitting a small bump or uneven section of pavement at around 60–70 mph. The entire front end begins to shake violently, and the steering wheel jerks rapidly back and forth, making it extremely difficult to maintain control of the vehicle. The only way to stop the shaking is to brake hard and slow down below 50 mph, which creates a dangerous situation. This violent steering vibration causes loss of directional stability and could easily lead to an accident if it happens in traffic or during lane changes. The sensation is so severe that it feels as if the front suspension or wheels are coming loose. I brought my Jeep to Wallace Jeep in Stuart, Florida where the technicians confirmed steering instability but stated that the steering damper is covered but the steering gear is not covered under warranty. I also contacted Jeep Cares, case # [XXX], and was told that Jeep “does not have to cover” my vehicle, even though it falls directly within the affected 2018–2020 Wrangler JL range identified in the [XXX]. v. FCA US LLC class action settlement related to the Death Wobble. The dealership’s refusal contradicts Jeep’s own Technical Service Bulletin 08-074-20 REV. E (“Improved Steering Feel”), which addresses steering wander, pull, and excessive play by replacing the steering gear and updating the EHPS software — exactly the symptoms I’m experiencing. This is a serious safety issue that occurs without warning and has not been resolved through the repairs or coverage Jeep has offered. The manufacturer’s denial of responsibility despite a known defect leaves drivers at risk of losing control at highway speeds. I am requesting that the NHTSA investigate and require Jeep/Stellantis to expand the recall or provide full coverage for all steering-related components contributing to this dangerous condition. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Steering, Sep 22, 2025
My 2019 Jeep Wrangler is experiencing the "death wobble" every time I hit any uneven pavement while traveling at 60-65. This is extremely unsettling and could cause serious injury or death. Why haven't all the Jeeps during this time span been recalled considering the number of reports of this issue on the 2019 Jeep Wrangler?
Steering, Vehicle speed control, Other or unspecified, Sep 9, 2025
Service Antilock Brake System. Service Shifter. Service 4WD. Loss communication with MPH. ABS light. Traction Control. Power Steering Failing. BRAKE. Doors Lock/Unlock. Vehicle shut down while I was driving and locked me out completely. Replaced Part No. 68321746AA-001 Vehicle was taken to four auto shops. None were able to diagnosed the issue. Mopar shop wanted to charge over $1,600 to replace ABS sensors and other items. I referred them to look at the part and was told it was not going to fix the issue. It did fix the issue. I have spent the last 2 months trying to figure out what was wrong with my vehicle and several funds later.
Steering, Power train, Electrical system, Aug 19, 2025
I drove over a rough patch/bump in the road. A ton of warning messages and failure lights activated on the dash. In addition to the check engine light, there were warnings for electronic stability protection, sway bar disconnect, ABS failure, power steering failure, shift lever malfunction. In addition to these malfunctions a failures, the windshield wipers turned on un-commanded and the radiator fan went into the highest possible speed, the digital engine temperature gauge failed, and both the digital and analog speedometers failed. This happened on a arterial road, losing power steering and braking at ~30mph unexpectedly was a shock, but manageable. At highway speeds it likely would have led to an accident or collision. Unfortunately, I don't have any documentation of the failure lights and systems failing, but it had happened several times prior to this occurrence, albeit only with dash warning lights, no actual system failures. After the system failures, I stopped driving the vehicle. The problem appears to be somewhat widespread and is caused by a failing CAN-C BUS. A quick google search will reveal NUMEROUS descriptions on the same dangerous issue. This thread seems to clearly expIain the root of the issue with the CAN-C BUS: [XXX] I replaced my old CAN-C BUS (p/n 68321746AA) with a new part and it appears to have resolved the issue. I have saved the old CAN-C BUS for inspection if NHTSA is interested. It looks exactly like the failed BUS in the linked reddit thread above. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Steering, Power train, Aug 12, 2025
have been experiencing extreme shaking and vibration so called “death wobble.” In 2023 I took it to the dealership to look into the issue to which they changed the steering stabilizer. Even though that helped for a few years however it did not resolve the problem. It was still occurring just not to the same degree. Currently I have tried to reach out to the dealership to look into the problem and the dealership refuses as the car or the part is not covered under warranty. However not enough time or mileage has passed for the car to not be under warranty. The dealership and the FCA refuse to help. This issue is very serious! It common with these models of Jeep wranglers and are life threatening.
Steering, Jul 22, 2025
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving over a bump in the road at an undisclosed speed, the vehicle experienced the death wobble. The contact slowed down to 30 MPH to correct the failure. The contact stated that all four tires had previously been replaced. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 44,000.
Steering, Power train, Engine, Jul 17, 2025
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving 70 MPH, the vehicle decelerated unintendedly and failed to exceed 40 MPH. Additionally, the vehicle lost power steering functionality and became difficult to steer. The contact stated that the vehicle later operated as needed; however, the failure recurred several times while driving. Several unknown warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not notified of the failure. The failure mileage was 111,000.
Steering, Engine and engine cooling, Electrical system, Jul 10, 2025
The contact owns a 2019 Jeep Wrangler. The contact stated while driving 20 MPH, the vehicle stalled. The contact stated that the vehicle was restarted. The contact continued to drive, but the power steering became inoperable. The contact stated that the vehicle became extremely hot, and the cells popped and damaged the battery. The contact stated that the check engine, power steering, and battery warning lights were illuminated. The vehicle was towed to the residence. The contact called the local dealer, but the vehicle was not diagnosed or repaired. The manufacturer was contacted, but no additional assistance was provided. The failure mileage was approximately 49,700.