2010 Ford Fusion
Problems, recalls and owner-reported issues
Steering is the leading concern among 5,128 owner complaints filed for this model year. This is the highest complaint count among 15 Fusion model years with reports.
Of the 2010 reports, 122 involved a crash and 9 involved a fire. 74 people were injured and 1 person died.
What owners report most often
Recalls and investigations
Air bags, frontal, driver side, inflator moduleMar 10, 2021
Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.
Campaign 21V158000 on NHTSA.gov
Air bags, frontalFeb 16, 2021
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Campaign 21V081000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleFeb 16, 2021
Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500. It also includes certain passenger-side air bag inflators and/or modules designed to fit 2005-2014 Ford Mustang, 2010-2012 Lincoln MKZ, 2010-2012 Ford Fusion, 2010-2011 Mercury Milan, 2007-2011 Ford Ranger, and 2007-2010 Lincoln MKX vehicles. Please see Ford's recall report for the specific part numbers. These parts may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Ford will notify dealers that purchased the affected parts, and dealers will provide replacement parts to purchasers, free of charge. The recall began March 18, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Campaign 21E013000 on NHTSA.gov
Service brakes, hydraulic, antilock/traction control/electronic limited slip, control unit/moduleDec 18, 2019
Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Campaign 19V904000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 7, 2019
Ford Motor Company (Ford) is recalling certain 2014 Ford Mustang vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2011 Ford Ranger and Mercury Milan vehicles, 2011-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles and 2011-2014 Ford Mustang vehicles sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2010 Ford Edge and Lincoln MKX vehicles, 2010-2011 Ford Ranger and Mercury Milan vehicles, 2010-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles, and 2010-2014 Ford Mustang vehicles sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 13, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall 19S01.
Campaign 19V001000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleNov 1, 2018
Ford Motor Company (Ford) is recalling certain 2010 Ford Fusion, Mercury Milan and 2010-2012 Lincoln MKZ vehicles that previously received a replacement passenger air bag under recall 16V-384, 17V-024 or 18V-046. In the event of a crash requiring deployment of the passenger air bag, the bracket that secures the air bag inflator to the module housing may deform, allowing the gas that inflates the air bag to leak out.
If the air bag does not inflate as intended, there is an increased risk of injury in the event of a crash.
Ford will notify owners, and dealers will replace the passenger air bag module, free of charge. The recall began November 21, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S34.
Campaign 18V775000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 11, 2018
Ford Motor Company (Ford) is recalling certain 2013 Ford Mustang vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2010 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2009 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 18V046000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedMay 31, 2016
Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain model year 2007-2008 Ford Ranger, Edge and Lincoln MKX vehicles, 2006-2008 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2005-2006 Ford GT vehicles and 2005-2008 Ford Mustang vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in the safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 16V384000 on NHTSA.gov
Fuel system, gasoline, storage, auxillary tankNov 24, 2015
Ford Motor Company (Ford) is recalling certain model year 2010-2011 Ford Fusion vehicles manufactured July 21, 2008, to March 4, 2011, and 2010-2011 Mercury Milan vehicles manufactured July 23, 2008, to December 10, 2010. The affected vehicles have fuel vapor canisters whose purge valves may not operate properly resulting in abnormal pressure changes in the fuel tank.
The pressure changes may cause the tank to crack and leak fuel. A fuel leak in the presence of an ignition source increases the risk of a fire.
Ford will notify owners, and dealers will update the vehicle powertrain control modules and inspect the vehicle for any diagnostic trouble codes (DTCs) for this issue and perform a leak test on the Canister Purge Valve (CPV). The fuel tank will be inspected for cracks. The CPV and fuel tank will be replaced as necessary. These repairs will be performed free of charge. The recall began on January 15, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S34.
Campaign 15V793000 on NHTSA.gov
EquipmentMay 29, 2014
Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.
The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.
Campaign 14E028000 on NHTSA.gov
Wheels, lugs/nuts/bolts/studsDec 7, 2011
FORD IS RECALLING CERTAIN MODEL YEAR 2010-2011 FORD FUSION AND MERCURY MILAN VEHICLES EQUIPPED WITH 17 INCH STEEL WHEELS AND BUILT FROM APRIL 1, 2009, THROUGH APRIL 30, 2009, AND FROM DECEMBER 1, 2009, THROUGH NOVEMBER 13, 2010. THE WHEEL STUDS MAY FRACTURE, POTENTIALLY CAUSING A WHEEL TO SEPARATE.
WHILE DRIVING, MULTIPLE STUD FRACTURES COULD OCCUR AT THE WHEEL LOCATION, AND THE OPERATOR MAY EXPERIENCE VEHICLE VIBRATION AND/OR WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
FORD WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE REAR BRAKE DISC SURFACE FOR FLATNESS AND REPLACE THE DISCS AS NECESSARY. ADDITIONALLY, THE WHEEL LUG NUTS WILL BE REPLACED ON ALL FOUR WHEELS. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JANUARY 24, 2012. OWNERS MAY CONTACT THE FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
Campaign 11V574000 on NHTSA.gov
Power train, automatic transmissionMay 24, 2010
FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, MILAN, AND ESCAPE VEHICLES MANUFACTURED FROM FEBRUARY 27, THROUGH MARCH 26, 2010. THE PARK ROD GUIDE RETENTION PIN MAY NOT HAVE BEEN PROPERLY INSTALLED WHICH FAILS TO CONFORM TO THE REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEFT PROTECTION AND ROLLAWAY PREVENTION".
A VEHICLE PARKED WITHOUT AN ENGAGED PARK PAWL AND WITHOUT AN APPLIED PARKING BRAKE MAY HAVE UNINTENDED MOVEMENT WHICH MAY CAUSE A CRASH.
FORD WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 28, 2010. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332 AND FOR THE HEARING IMPAIRED CALL 1-800-232-5952 (TDD). REPRESENTATIVES ARE AVAILABLE MONDAY THROUGH FRIDAY: 8:00AM - 5:00PM.
Campaign 10V222000 on NHTSA.gov
Seats, front assembly, reclinerApr 20, 2010
FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, EXPLORER, EXPLORER SPORT TRAC, AND MERCURY MILAN AND MOUNTAINEER VEHICLES MANUFACTURED BETWEEN DECEMBER 15, 2009 THROUGH FEBRUARY 3, 2010 EQUIPPED WITH FRONT SEAT MANUAL RECLINERS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 202, "HEAD RESTRAINT." THE RECLINER GEAR PLATE TEETH MAY BE OUT OF DIMENSION SPECIFICATION WHICH COULD RESULT IN LIMITED PAWL TO GEAR PLATE TOOTH ENGAGEMENT.
IN THE EVENT OF A CRASH, THE SEATBACK AND HEAD RESTRAINT MAY MOVE REARWARD, INCREASING THE RISK OF INJURY.
DEALERS WILL REPLACE THE MANUAL RECLINERS FOR BOTH POWER AND MANUAL SEATS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE APRIL 30, 2010. OWNERS MAY CONTACT FORD AT 1-866-436-7332.
Campaign 10V161000 on NHTSA.gov
Representative owner complaints: service brakes
547 reports, newest first. Show all
Service brakes, Jul 22, 2022
Out of nowhere, my brakes malfunctioned with the pedal sinking low to the floor. Several lights went off including check brake system, traction control and ABS. This issue seems to be exactly related to a current recall involving ABS on 2010 Fusions but doesn't appear to apply to the Hybrid model. The issue is intermittent.
Service brakes, Jul 7, 2022
The breaks pedal on my Fusion just goes straight to the floor and can barely stop the car when its in drive and not giving any gas. A recall was issued on this model of a car but my car wasnt included for some reason. I am having the same issue with the ABS as the recall. Do your job NHTSA and make ford recall it on all fusions before someone dies. Ive already spent a ton of money on replacing all the brake pads, rotors, master cylinder and now have to replace the ABS system.
Service brakes, Hydraulic, Jul 7, 2022
The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal went to the floorboard while depressed with the brake warning light illuminated. Additionally, the vehicle intermittently failed to start due to battery failure. The vehicle was taken to an independent mechanic who replaced the brake calipers; however, the failure recurred. The vehicle was taken back to the mechanic and diagnosed with ABS hydraulic control unit failure. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 98,000.
Service brakes, Jul 7, 2022
There is a recall for some vehicles manufactured near the time of this particular vehicle’s manufactured date for the ABS control unit. The valves stick causing unsafe breaking conditions. This particular vehicle exhibits the same behavior as described in the recall but this VIN is not showing up as one of the recalled vehicles for this problem. It is recall 19V904000 issued on December 12, 2019.
Service brakes, Jul 5, 2022
The contact owns a 2010 Ford Fusion. The contact stated that while depressing the brake pedal, it traveled to the floorboard causing the emergency brake to have to be used. The vehicle had not been taken to the dealer to be diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 70,000.
Service brakes, Jun 29, 2022
The same problem as safety recall19S54. My brake pedal went mushy and falls under the same exact problems that the safety recall is for. My vehicle however is not included in the recall
Other or unspecified, Service brakes, Jun 28, 2022
When driving I am having to push my break peddle to the floor in order for my breaks to finally activate and begin to slow the car down if breaks will work at all at time. This is intermittent but is happening more often and has almost causing multiple wrecks. I was told it is the Hydraulic Control Module by a multiple professionals. This is also recalled on 2010 Ford Fusion models but does not include vehicle at the moment.
Service brakes, Jun 20, 2022
I believed my 2010 Ford Fusion Hybrid MFG date: 08/09 fall under Recall NHTSA 19V904000. However, I did not receive any letter notification and/ or notice. I called the dealership and they’re asking for $200 something for diagnose then go from there. Is there anyway can confirm that my car under the recall so I get fix without any charge? I’m leaving on budget, cannot afford on anything else. Please find the attached pictures.
Service brakes, Jun 17, 2022
I was driving down the road the other day in my 2010 Ford Fusion hybrid and my brakes suddenly didn't work. I got the big red flashing message on the dashboard to check the braking system. I had to really stomp on the brake pedal to get it to stop. Very concerning. I had a mechanic come to me and first checked the brake fluid which was still full. But he said it was thicker than it should be, gel like. He then ran the computer scan on it and found that the brake control system showed a fault indicating a valve stopped working or was stuck open or something. He checked it for an open recall suspecting it would be covered by the Ford 19S54 recall and only found some airbag recall issue. But the recall, that was issued just a few years ago, didn't come up because apparently it only covered vehicles made up through July 2009. Mine was made in I think November 2009. Not that many months apart and given that it exhibited the EXACT same behavior as the recall indicates, it seems it really should be extended to cover my car.
Service brakes, Jun 10, 2022
Hello, Around 3 years ago, I found out that Ford had a recall on 2010 Fusion for the brakes but my VIN # was not included. About a year and a half ago, I took my car to the shop because my brakes and rotors needed replaced. The mechanic called me to say even though they were all replaced, i still have to push the pedal to floor to stop but there was a recall on your make and model and to contact Ford. I then told him that when I checked a few years ago, it did not qualify. He then called Ford himself and was told the same thing. It cost us almost $900 to repair. Now only a little over a year later, the brakes are very bad and I’m asking that you please relook at VIN #’s. It scared me so bad today when I had to suddenly stop and all I heard was grinding and almost rear ended the car in front of me. It made me want to email you to find out if my car can fixed. This problem also causes wear and tear to happen faster because I should not have to replace them already after a short this period of time. Can you please re evaluate my car for the recall and also assistance with repairing the brakes and rotors? I do have the receipt from a licensed shop showing the repair I did already I can send too. Please advise. Thank you so much in advance for your time and help. I truly appreciate it!!
Service brakes, Jun 6, 2022
The contact owns a 2010 Ford Fusion. The contact stated while his spouse was driving 35 MPH, the vehicle experienced brake failure. The contact stated there was no warning light illuminated. The vehicle was driven back to the residence. The vehicle was not repaired. The manufacturer was informed of the failure. The approximate failure mileage was 150,000.
Service brakes, May 19, 2022
I was driving and tried to stop and all my light came on dealing with my breaks. I replaced the brakes pads and that didn’t work. So I took it to the shop and they said that my ABS is out
Service brakes, May 4, 2022
About a month and half ago, I began experiencing issues with my brakes. They just would need to be pressed on more than the norm. I had the front brake pads replaced and still experienced the problem. I then took it to my local mechanic and they stated that the ABS module was faulty and needs to be replaced. I have experienced near crash incidents because of this.
Service brakes, May 1, 2022
Braking system just went down in middle of coming to stop sign. All lights for entire brakes system displayed. Abs went down. advance trac lights, wrench lights, Brake lights, Abs Lights, Anti slip lights, and no power in system to barely stop. Almost went into intersion before stopping with brakes to the floor.
Service brakes, Apr 24, 2022
I was driving one night leaving my aunt’s house , as I’m exiting her apartment complex I noticed my car was rolling into the car while my foot was on the brake. I started to pump the brakes and nothing happened. I put the car in reverse and i mashed the brake to floor so I could stop the car. Once I put the car back in drive to exit, I started to proceed down the street and I came to a stop sign but my car too entirely too long to stop. There were no lights on in the dash. There was brake fluid in the car. The brake pads were in perfect condition. The brakes failed without any warning. I have changed the brake pads and bled them. I have replaced the master cylinder. I found out that there isn’t any issue with the booster. I replaced the ABS control module, nothing has changed. Still no brakes. I found out that this issue was fixed before I bought this car from the previous owner in late 2020 & it costed them about $1500 to fix. The car is not even worth that much. I did research and I found out that this is a common issue among 2010 Ford Fusions and there was a recall on the car back in December of 2019. Ford Motor Co. started sending letters out in January of 2020, obviously the recall window was not open very long. I contacted Ford about this issue and the only thing I was told was take it to the dealer and I’m like how when I can’t drive the car. Also, I’ve called every Ford dealer to ask for an quote to see how much it is to fix the issue and I was told I cannot receive an quote unless they can physically look at the car. I really how Ford does another recall before someone gets killed in a crash or seriously injured. This is totally ridiculous and I am disgusted with car.
Electrical system, Service brakes, Apr 22, 2022
I was driving my 2010 Ford Fusion Hybrid and as I was approaching a red signal light I applied pressure to my brakes and seen my dash alert me of my ABS system failing and my advanced Trac needs to be serviced due to my brakes not working properly I was almost involved in a serious collision. i had to pull on my e brakes to prevent injury, in result off I pulled off into the nearest lot and called a tow truck to take me and my vehicle to the dealership I was given a crazy repair charge and i was doing some research and i seen a recall for this issue, however i was advised that my VIN does not have any recalls. This is unsafe and needs to be addressed.
Service brakes, Apr 22, 2022
The brake pedal went almost all the way down before brakes engaged. The brakes did not seem as effective in stopping. There was a risk of rolling into traffic or crashing into another car because I could not stop. Several warning lights come on including messages to "inspect brake system" and "Service advancetrac". A ford dealership has inspected the car and recommends replacing the Hydraulic Control Unit and the ABS Module. They say it is not covered under any recall.
Service brakes, Air, Fuel system, Gasoline, Apr 13, 2022
The contact owns a 2010 Ford Fusion. The contact stated that the ABS system was inoperable. The contact stated that there were no warning lights illuminated. The contact stated that the parking brake was needed to stop the vehicle. The contact also stated that the vehicle was leaking fuel. The contact stated that the fuel leak was evident whenever there was more than half of the fuel in the vehicle. The contact stated that after parking the vehicle overnight, there would be fuel on the ground underneath the vehicle. The vehicle was taken to the dealer and the contact was informed by the dealer that there was a glitch with his vehicle and there was nothing to be concerned about regarding the fuel pump. The contact stated that the dealer refused to service the vehicle. The manufacturer was notified of the failure and promised to call back however, the contact had not yet received the call back. The failure mileage was 260,000.
Service brakes, Hydraulic, Apr 6, 2022, crash
The contact owns a 2010 Ford Fusion. While attempting to park his vehicle, the brake pedal depressed to the floorboard and failed to stop as needed. The ABS warning light had remained illuminated on the instrument panel for years prior to the failure. As a result of the failure, the contact hit a steel door which damaged both the door and the front end of his vehicle. The air bags did not deploy upon impact. The contact experienced pain to his lower back but did not seek medical attention. Police were called to the scene and a police report was filed. The contact was able to drive away from the scene but continued to experience brake failure. He would also have to use his emergency brake to stop the vehicle as the ABS warning light continued to illuminate on the instrument panel. The contact took the vehicle to an independent mechanic where he was informed that a defective brake module caused the failure. The dealer was notified of the failure and informed him that his vehicle was not included in NHTSA Campaign Number: 19V904000(Service Brakes, Hydraulic). The manufacturer was also notified of the failure and a case was filed. The vehicle had yet to be repaired. The failure mileage was approximately 250,000.
Service brakes, Apr 3, 2022
I got warning messages for my brake system and AdvanceTrac system which is the ECS in 2010 Ford Fusion. This resulted in an almost complete loss of braking power. For the second time in the past 4 months, I've gotten simultaneous brake warning lights and service advancetrac warning lights when travelling <15mph. It also happened once about 3 or so years ago. This has resulted in an almost complete loss of braking power. I fully depress the brake pedal and the car barely slows down. I had to pull the ebrake the first time so I didn't roll through a stop sign into an intersection. It is incredibly dangerous. What if I was going faster? What if there was heavy traffic, a child in the street? If I was in a parking lot? This is death or injury waiting to happen. After turning the car off and on again, the warning lights go away and the brake system is back to normal. I have not taken it to the dealer yet. There is a recall for 2006-2010 Ford Fusions for a sticking ABS valve but my car was not included in that recall. Ford needs to recall ALL 2010-2012 Fusions for this problem.
Service brakes, Mar 30, 2022
While driving the brake pedal will go all the way down and not braking the car, I have to press harder to start slowing down Brake pedal has almost no pressure and its really hard to break, I read there was a recall over this issue on some cars, but I have not received any recall notice regarding this
Service brakes, Mar 29, 2022
A sudden problem happened when to make the brakes on our 2010 Fusion Hybrid work the pedal had to be pressed all the way to the floor. No warning lights came on until the problem surfaced. The warning lights say to check the AdvanceTrac system and the Brake sytem. The car was suddenly unsafe to drive, because if we had to brake quickly we would not be able to do so. A local Ford Service Shop said the HCU and ABS systems need replacing and will cost at least $2,400. This issue is similar to one that was subject to a recall, but our vehicle was not included in that recall. The car is at the Ford shop awaiting parts for repair.
Service brakes, Hydraulic, Mar 23, 2022
The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal went to the floorboard while depressed and the vehicle was not able to stop immediately. The vehicle was taken to an independent mechanic who diagnosed that the ABS Hydraulic Control Unit (HCU) was faulty and needed to be replaced. The vehicle was not repaired. The dealer was made aware of the failure but informed the contact that there was no recall associated with the VIN. The manufacturer was made aware of the failure but informed the contact that there was no recall associated with the VIN. The contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the VIN was not included. The failure mileage was approximately 120,000.
Service brakes, Mar 12, 2022
No break pressure. I haven't been able to drive the car for about 2 year. Spent to much money trying to get it fixed. Booster x 2, master cylinder x 2 and abs modulator. Fusion has 83000 miles.
Service brakes, Mar 11, 2022
Car is a 2010 Ford Fusion Hybrid. With no prior warning, brakes went out and the brake pedal went all the way to the floor with almost no stopping power whatsoever. Dealer wants $2000 for ABS Module and HCU replacement. Ford has a warranty on this for some 2006-2010 models, so I don't know why my car is not covered under this warranty if it's happening to my car too.