2009 Ford Fusion
Problems, recalls and owner-reported issues
Service brakes is the leading concern among 1,022 owner complaints filed for this model year. This is the 11th highest complaint count among 15 Fusion model years with reports.
Of the 2009 reports, 65 involved a crash and 5 involved a fire. 40 people were injured.
What owners report most often
Recalls and investigations
Air bags, frontal, driver side, inflator moduleMar 10, 2021
Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.
Campaign 21V158000 on NHTSA.gov
Air bags, frontalFeb 16, 2021
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Campaign 21V081000 on NHTSA.gov
Service brakes, hydraulic, antilock/traction control/electronic limited slip, control unit/moduleDec 18, 2019
Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Campaign 19V904000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 11, 2018
Ford Motor Company (Ford) is recalling certain 2013 Ford Mustang vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2010 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2009 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 18V046000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 10, 2017
Ford Motor Company (Ford) is recalling certain 2012 Ford Fusion and Mustang and Lincoln Zephyr and MKZ vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain 2009 Ford Ranger, Edge, Fusion and Mustang, Lincoln MKX, MKZ and Zephyr and Mercury Milan vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Ford is recalling certain 2007-2008 Ford Ranger, Edge and Lincoln MKX, 2006-2008 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ, 2005-2008 Ford Mustang and 2005-2006 Ford GT vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Interim letters informing owners of the recall and that parts are not yet available began mailing March 1, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 17V024000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedMay 31, 2016
Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain model year 2007-2008 Ford Ranger, Edge and Lincoln MKX vehicles, 2006-2008 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2005-2006 Ford GT vehicles and 2005-2008 Ford Mustang vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in the safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 16V384000 on NHTSA.gov
EquipmentMay 29, 2014
Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.
The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.
Campaign 14E028000 on NHTSA.gov
Representative owner complaints
1,022 reports, newest first.
Service brakes, Sep 3, 2026
Dear NHTSA, The braking system failed which was covered by Ford Safety Recall 19S54 with NHTSA campaign #19V904000 at 37,750 miles. After research and finding the label of the ABS Hydraulic Control Unit still on the vehicle, being manufactured 07/12/2008, picture attached, it turned out to be the original HCU, whose failures were the reason for the Safety Recall. A Ford dealer had performed software evaluation of the ABS HCU and determined replacement of unit not necessary. This was done on 4/14/2021 at 17,606 miles along with break fluid change to DOT4 and reservoir cap change. Unfortunately my wife just went through a four-way stop intersection when the break pedal went to the end of its movement without being able to stop. No injuries or crashes involved. According to all sources read, this was caused by the ABS HCU valve being stuck open after attempting to brake on the slippery road during rain. The car is no longer safe to drive and sitting in front of our home. Asked Ford Motor Co to take care of this incomplete repair by the Ford dealer and replace the HCU but they say it’s no longer their responsibility. My understanding is that with a safety recall, they are to fix the issue as long as the vehicle is still around. They don’t agree. Can you help with this situation? Thank you! Note: I tried to upload pictures of ABS HCU and VIN labels on vehicle but failed after a number of retry attempts. If you need them I can try another way. Let me know.
Suspension, Exterior lighting, Service brakes, Jul 20, 2026
my brakes had went out while i was driving home from work
Service brakes, Hydraulic, Apr 20, 2026
The contact owns a 2009 Ford Fusion. The contact stated that the vehicle was taken to an independent mechanic for brake repairs, and after the repairs, the brake pedal felt spongy. The independent mechanic performed further inspections and diagnosed the vehicle with insufficient brake pressure due to a failure of the ABS hydraulic control unit. The manufacturer was notified of the failure. The contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the VIN was not included. The approximate failure mileage was 110,000.
Service brakes, Hydraulic, Feb 11, 2026
The contact owns a 2009 Ford Fusion. The vehicle was repaired under NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic), but the failure occurred. When the vehicle was retrieved from the dealer, the contact was informed that the vehicle had passed an inspection. The brake pedal was depressed approximately seventy percent down for the brakes to engage. The contact stated that the brake pedal was soft while depressed. No warning lights were illuminated. The vehicle was taken back to the dealer, but it was unknown if the vehicle was diagnosed. The contact was informed that the rear calipers needed to be inspected. However, the contact was unsure if the rear calipers were inspected. The contact stated that the vehicle remained at the dealer unrepaired and was awaiting a flush of the braking system. The dealer made the manufacturer aware of the issue. The zone manager informed the contact that a satisfaction program had expired. No additional assistance was provided. The failure mileage was approximately 95,000.
Service brakes, Oct 8, 2025
The ABS warning light came on while driving, and the brakes began to feel unsafe during normal stops. I later learned there is an open recall for the ABS module on my vehicle. When I took it to the dealership, they refused to perform the recall repair unless I paid out of pocket for a new ABS control module, even though the recall notice mentions this component. The issue affects braking performance and safety, especially on wet roads. The ABS system continues to malfunction, and the dealership’s refusal to complete the recall repair leaves the vehicle unsafe to drive.
Service brakes, Aug 12, 2025
My car's brake pedal started not working properly. When trying to brake, the brake pedal goes down further than what it is supposed to and it takes longer than normal to brake, causing almost wrecks. It happens suddenly when trying to brake sometimes and it is very scary. There was a previous recall on the brake lines and it said they needed to be flushed out and all. I had this done to my car before and thought everything was okay. But it is not. I called Ford and they said there is currently a Customer Satisfaction Program that covers the repair of the Hydraulic control unit but it is limited to vehicles under 15 years old. My car is 16 years old so it does not qualify for this program. I asked why this wasn't a recall because it is such a big safety issue and they stated they couldn't make it a recall, it would have to be reported and issued from NHTSA. If the brakes/brake pedal is messing up and this is a known issue, then the vehicles' age should not matter. It should be recalled and fixed because this is such a huge safety concern and obviously a defect when manufactured. I don't have another car to drive and I'm sure there are numerous others in this same position and I feel it is imperative that this be looked into further and issued as a recall so people can remain safe and I'm sure this would save lives. I almost ran into a car today and it is extremely hazardous. It is very dangerous and scary and there is no warning light or anything indicating anything is wrong until driving it and it randomly happens. I have taken care of my car and had the previous recalls fixed but Ford knows this is an issue and very dangerous so it seems clear this needs to be issued as a recall.
Service brakes, Aug 7, 2025
I have recall 19S54 and called Ford. They made an appointment with Downtown Ford, Charleston, WV. The dealership said ford declined my recall repair due to not being able to get their machines to get any codes from my car. The ABS light is on. My mechanic said Ford should fix their recall. The recall says the D03 fluid must be changed to DOT 4 even if no problem found and if problem detected how to fix it! Ford declined because they can't get code reader to work on my car. They said it is a Preexisting Condition! My car is old but only has 24,800 miles and has been kept inside in a heated garage. The Downtown dealership said their hands are tied and would love to make my car safe. Their phone number is 304 344 1601. Please help me get my car fixed!!! I have called Ford multiple times and no help due to not having the codes from the dealership. Thanks!!!!
Service brakes, Nov 26, 2024
I have noticed for some time in our 2009 Ford Fusion purchased used that the brake travel was longer than it should be. This results in the need to anticipate braking quicker and react faster to allow appropriate time to slow down. In doing some research I discovered a Ford recall 19S54 which was apparently replaced by a Ford CSP 21N11. I made an appointment to have this issue addressed by a Ford dealership and they said that the CSP expired in 2022 and the vehicle is no longer covered despite the persistence of the safety issue and the fact that it has not been repaired for this known problem. With a significant issue, such as braking, I believe the expiration should be extended to allow for Ford owners to have this known safety issue addressed appropriately by Ford.
Service brakes, Hydraulic, Air bags, Oct 25, 2024
The contact owns a 2009 Ford Fusion. The contact stated while driving 35-45 MPH, the brake pedal was depressed; however, the vehicle was slow to respond. The check brakes system message was displayed. The ABS warning light was illuminated. The contact received notifications of NHTSA Campaign Numbers: 19V904000 (Service Brakes, Hydraulic) and 21V158000 (Air Bags); however, the parts to do the recall repairs were not yet available. The local dealer was contacted. The dealer completed the air bag recall and diagnosed the vehicle and determined that the brake module and HECU module were corroded. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue, but no additional assistance was provided. The failure mileage was approximately 96,970. Parts distribution disconnect.
Service brakes, Sep 28, 2024, crash
After activation of ABS brake system, brakes became "soft" and "spongy" with permanent increased braking time. As described in safety recall 19S54, this due to to a valve in the Hydraulic Control Unit (HCU) being stuck open. I received a letter from Ford Motor Company regarding this safety recall in 2011 informing of the defect and assuring "we will correct this condition." The vehicle was taken to Koons Ford (1051 E Broad St., Falls Church, VA, 22044; 703-241-7250) on 7/5/21 for repair. However, the HCU was not replaced, which appears to be the only remedy to this problem. Instead DOT 3 brake fluid was replaced with DOT 4 fluid, according to Koons Ford. However, after subsequent activation of the ABS brake system, the brakes became impaired again in the same way as before. I returned the car to Koons Ford on [XXX]. A "one-time" repair was performed pursuant to "customer satisfaction program" 21N11, as Ford acknowledged in a letter to dealers dated 12/7/21 that numerous customers were returning as the action prescribed in safety recall 19S54 did not repair the defective brakes. However, the HCU was not replaced. Service Advisor Kevin Lacki told me the HCU "passed" the inspection/diagnostic despite replication of the problem. I complained to Service Manager Rob Ryans who did nothing. I emailed the General Manager of the dealership twice, and he never responded. I called the manufacturer on [XXX] (case #[XXX]), but no action was taken. The problem of "soft" brakes and extended travel time quickly resurfaced and led to a vehicle accident in early 2023. The Ford Motor Company is employing a diagnostic that results in false "passes" for HCUs that should be replaced (and/or this dealership did not correctly perform the service actions). Even after "passing" Ford's diagnostic, the HCU valve(s) become stuck open after ABS activation. The safety recall should be investigated and the recall amended to replace faulty HCUs. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Service brakes, Sep 23, 2024
While i was driving and the car hits a hole if the road, and i tried to brake so i can controll the car the breakes became uresponsive for the moment and after a few seconds when i try to brake again the travel space of the brake pedal is increased a lot and is near the end, and it takes a lot before the things return to normal( so it happens only when the car try to activate te ABS system).
Service brakes, Hydraulic, Sep 16, 2024
The contact owns a 2009 Ford Fusion. The contact stated that while driving at various speeds, the brake pedal would depress to the floorboard without warning. The vehicle was taken to a dealer where the contact was informed that the Hydraulic Electric Control Unit (HECU) had failed and needed to be replaced. Upon investigation, the contact discovered NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic). The manufacturer was notified of the failure and the contact was informed that the vehicle was not included in the recall. The vehicle was repaired. The failure mileage was 92,000.
Service brakes, Sep 4, 2024, crash
The contact owns a 2009 Ford Fusion. The contact stated that the vehicle was experiencing extended brake pedal travel while driving. The contact stated that while driving at various speeds and depressing the brake pedal, the brake pedal traveled down to the floorboard, causing the braking distance to be extended. There was no warning light illuminated. Additionally, the contact stated that while her husband was pulling into the garage, the brake pedal was depressed. Still, the failure recurred, causing the vehicle to crash into the garage wall. There was no injury sustained. The vehicle was drivable. The contact later received notification of Ford Campaign Number: 21N11. The vehicle was taken to the dealer, where the brake fluid and the brake fluid cap were replaced; however, the failure persisted. The contact stated that the dealer had not replaced the HCU. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The manufacturer referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 160,000.
Electrical system, Service brakes, Aug 16, 2024
The contact owns a 2009 Ford Fusion. The contact stated while driving at an undisclosed speed, the brake pedal depressed with no warning light illuminated. The vehicle was taken to the dealer however, the vehicle was not diagnosed or repaired. The contact was informed that the brake lines had been flushed. The contact stated while driving at an undisclosed speed, the failure recurred. The vehicle was taken to the dealer for a second time, and the vehicle was diagnosed with an HECU fuse failure. The contact was informed that the HECU fuse needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for assistance. The failure mileage was approximately 173,890.
Steering, Suspension, Wheels, Aug 2, 2024
The potholes on the highway caused my tie rods and tires to explode!
Service brakes, Jul 9, 2024
Chapman Ford in Marysville, Ohio has had my car for ABS recall for almost a month now. They said they are waiting on the HYDRAULIC CONTROL UNIT HCU. Is this normal to take this long to fix.
Service brakes, Mar 15, 2024
Ford dealership refuses to replace ABS HCU unit. Recall states that it will be replaced if defective. Dealership said that it is defective but not part of the recall. Shows that it is part of the recall.
Latches/locks/linkages, Dec 5, 2023
The contact owns a 2009 Ford Fusion. The contact stated that the front driver's side door became inoperable. The contact stated that the front driver's door failed to open. The contact stated that the door latch could be locked and unlocked; however, the front driver's door could not be opened. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 100,000.
Service brakes, Nov 24, 2023
Hcu fails and prolongs braking, brakes are often soft
Engine and engine cooling, Sep 20, 2023
The contact owns a 2009 Ford Fusion. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to an independent mechanic, who determined that the exhaust manifold valve was stuck in the open position. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken back to the independent mechanic, who determined that the exhaust manifold valve was stuck in the open position again. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was unknown.
Service brakes, Sep 10, 2023
My brakes have been soft when I was sold the vehicle. I was assured multiple times that there is nothing wrong with them. As I have taken it in for multiple oil changes, the mechanics always seem to have a problem with the brakes. I’ve taken it to get the calipers, discs and master cylinder replaced and they have been bled for over 24 hours and are still soft and can’t find the reason. Every mechanic has told me they won’t pass safety yet I was sold this car with a safety pass. I’m still paying on this vehicle and haven’t even had it a year. The photos I uploaded are from Carfax Car care. I have receipts for the brakes and master cylinder being replaced if those are needed.
Engine, Aug 29, 2023
Transmission will not go into gear. When it finally does shift it jumps completely forward or backwards depending on the gear. However, it does not matter which gear you put it in. It takes several attempts before it does go into gear; at that time it will completely jump forward/backward. This causes great risk to myself and others on the road/parking lots. I never know when it is going to get in gear or if it will go out while driving. The problem has been reported to the Ford company. The vehicle as not been inspected by any manufacture or policy/insurance. There was no warning, or no warning when it happens.
Tires, Aug 10, 2023
TIRE SIZE IS 205/60R16 UPON DRIVING VEHICLE TIRE DEVELOPED RIPPLING OR BULDGING AROUND ENTIRE SIDEWALL
Other or unspecified, May 25, 2023
went to get my oil changed and tires rotated at the dealership they said they could not rotate tires because the lug nuts were swollen and they couldn't because they might break. this seems to be a common problem
Engine and engine cooling, Mar 22, 2023
The contact owns a 2009 Ford Fusion. The contact stated while performing a daily routine check on the vehicle, she noticed that there was no engine oil in the vehicle. The vehicle was taken to the dealer, who informed the contact that they were aware that the oil dip stick assembly had failed due to the screws becoming loosened. The vehicle was not repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 114,000.