2010 Ford Fusion
Problems, recalls and owner-reported issues
Steering is the leading concern among 5,128 owner complaints filed for this model year. This is the highest complaint count among 15 Fusion model years with reports.
Of the 2010 reports, 122 involved a crash and 9 involved a fire. 74 people were injured and 1 person died.
What owners report most often
Recalls and investigations
Air bags, frontal, driver side, inflator moduleMar 10, 2021
Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.
Campaign 21V158000 on NHTSA.gov
Air bags, frontalFeb 16, 2021
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Campaign 21V081000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleFeb 16, 2021
Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500. It also includes certain passenger-side air bag inflators and/or modules designed to fit 2005-2014 Ford Mustang, 2010-2012 Lincoln MKZ, 2010-2012 Ford Fusion, 2010-2011 Mercury Milan, 2007-2011 Ford Ranger, and 2007-2010 Lincoln MKX vehicles. Please see Ford's recall report for the specific part numbers. These parts may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Ford will notify dealers that purchased the affected parts, and dealers will provide replacement parts to purchasers, free of charge. The recall began March 18, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Campaign 21E013000 on NHTSA.gov
Service brakes, hydraulic, antilock/traction control/electronic limited slip, control unit/moduleDec 18, 2019
Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Campaign 19V904000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 7, 2019
Ford Motor Company (Ford) is recalling certain 2014 Ford Mustang vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2011 Ford Ranger and Mercury Milan vehicles, 2011-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles and 2011-2014 Ford Mustang vehicles sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2010 Ford Edge and Lincoln MKX vehicles, 2010-2011 Ford Ranger and Mercury Milan vehicles, 2010-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles, and 2010-2014 Ford Mustang vehicles sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 13, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall 19S01.
Campaign 19V001000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleNov 1, 2018
Ford Motor Company (Ford) is recalling certain 2010 Ford Fusion, Mercury Milan and 2010-2012 Lincoln MKZ vehicles that previously received a replacement passenger air bag under recall 16V-384, 17V-024 or 18V-046. In the event of a crash requiring deployment of the passenger air bag, the bracket that secures the air bag inflator to the module housing may deform, allowing the gas that inflates the air bag to leak out.
If the air bag does not inflate as intended, there is an increased risk of injury in the event of a crash.
Ford will notify owners, and dealers will replace the passenger air bag module, free of charge. The recall began November 21, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S34.
Campaign 18V775000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 11, 2018
Ford Motor Company (Ford) is recalling certain 2013 Ford Mustang vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2010 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2009 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 18V046000 on NHTSA.gov
Air bags, frontal, passenger side, inflator moduleDo not drive until repairedMay 31, 2016
Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain model year 2007-2008 Ford Ranger, Edge and Lincoln MKX vehicles, 2006-2008 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2005-2006 Ford GT vehicles and 2005-2008 Ford Mustang vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in the safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Campaign 16V384000 on NHTSA.gov
Fuel system, gasoline, storage, auxillary tankNov 24, 2015
Ford Motor Company (Ford) is recalling certain model year 2010-2011 Ford Fusion vehicles manufactured July 21, 2008, to March 4, 2011, and 2010-2011 Mercury Milan vehicles manufactured July 23, 2008, to December 10, 2010. The affected vehicles have fuel vapor canisters whose purge valves may not operate properly resulting in abnormal pressure changes in the fuel tank.
The pressure changes may cause the tank to crack and leak fuel. A fuel leak in the presence of an ignition source increases the risk of a fire.
Ford will notify owners, and dealers will update the vehicle powertrain control modules and inspect the vehicle for any diagnostic trouble codes (DTCs) for this issue and perform a leak test on the Canister Purge Valve (CPV). The fuel tank will be inspected for cracks. The CPV and fuel tank will be replaced as necessary. These repairs will be performed free of charge. The recall began on January 15, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S34.
Campaign 15V793000 on NHTSA.gov
EquipmentMay 29, 2014
Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.
The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.
Campaign 14E028000 on NHTSA.gov
Wheels, lugs/nuts/bolts/studsDec 7, 2011
FORD IS RECALLING CERTAIN MODEL YEAR 2010-2011 FORD FUSION AND MERCURY MILAN VEHICLES EQUIPPED WITH 17 INCH STEEL WHEELS AND BUILT FROM APRIL 1, 2009, THROUGH APRIL 30, 2009, AND FROM DECEMBER 1, 2009, THROUGH NOVEMBER 13, 2010. THE WHEEL STUDS MAY FRACTURE, POTENTIALLY CAUSING A WHEEL TO SEPARATE.
WHILE DRIVING, MULTIPLE STUD FRACTURES COULD OCCUR AT THE WHEEL LOCATION, AND THE OPERATOR MAY EXPERIENCE VEHICLE VIBRATION AND/OR WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
FORD WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE REAR BRAKE DISC SURFACE FOR FLATNESS AND REPLACE THE DISCS AS NECESSARY. ADDITIONALLY, THE WHEEL LUG NUTS WILL BE REPLACED ON ALL FOUR WHEELS. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JANUARY 24, 2012. OWNERS MAY CONTACT THE FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
Campaign 11V574000 on NHTSA.gov
Power train, automatic transmissionMay 24, 2010
FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, MILAN, AND ESCAPE VEHICLES MANUFACTURED FROM FEBRUARY 27, THROUGH MARCH 26, 2010. THE PARK ROD GUIDE RETENTION PIN MAY NOT HAVE BEEN PROPERLY INSTALLED WHICH FAILS TO CONFORM TO THE REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEFT PROTECTION AND ROLLAWAY PREVENTION".
A VEHICLE PARKED WITHOUT AN ENGAGED PARK PAWL AND WITHOUT AN APPLIED PARKING BRAKE MAY HAVE UNINTENDED MOVEMENT WHICH MAY CAUSE A CRASH.
FORD WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 28, 2010. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332 AND FOR THE HEARING IMPAIRED CALL 1-800-232-5952 (TDD). REPRESENTATIVES ARE AVAILABLE MONDAY THROUGH FRIDAY: 8:00AM - 5:00PM.
Campaign 10V222000 on NHTSA.gov
Seats, front assembly, reclinerApr 20, 2010
FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, EXPLORER, EXPLORER SPORT TRAC, AND MERCURY MILAN AND MOUNTAINEER VEHICLES MANUFACTURED BETWEEN DECEMBER 15, 2009 THROUGH FEBRUARY 3, 2010 EQUIPPED WITH FRONT SEAT MANUAL RECLINERS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 202, "HEAD RESTRAINT." THE RECLINER GEAR PLATE TEETH MAY BE OUT OF DIMENSION SPECIFICATION WHICH COULD RESULT IN LIMITED PAWL TO GEAR PLATE TOOTH ENGAGEMENT.
IN THE EVENT OF A CRASH, THE SEATBACK AND HEAD RESTRAINT MAY MOVE REARWARD, INCREASING THE RISK OF INJURY.
DEALERS WILL REPLACE THE MANUAL RECLINERS FOR BOTH POWER AND MANUAL SEATS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE APRIL 30, 2010. OWNERS MAY CONTACT FORD AT 1-866-436-7332.
Campaign 10V161000 on NHTSA.gov
Representative owner complaints
5,128 reports, newest first.
Steering, Service brakes, Fuel/propulsion system, May 18, 2025
Unknown, I was driving in my wheel stop moving , it’s saying now power steering wheel, for my breaks, it keep saying check brake system
Service brakes, May 16, 2025
I got a letter from ford awhile ago about my brakes. I brought it in then they stated I was fine. But you have to push my brake peddle all the way to the floor of the car to make my vehicle stop. I feel this is VERY UNSAFE for me and my family, And also others around me if something where to happen do to this problem. We have done multiply things to try to correct the problem with no luck.
Steering, Apr 28, 2025
THE RACK - POWER STEERING FAILURE. DAUGHTER IS DRIVING THE CAR ON THE HIGHWAY AND NO POWER STEERING. 2 YEARS AGO HAD THE DEALER PUT ONE IN, 3 TIMES TO GET IT RIGHT. JUST FAILED NOW. WARNING LIGHTS ARE STEERING POWER ASSIST, AND I BELIEVE TRACTION CONTROL.
Steering, Apr 9, 2025
The contact owns a 2010 Ford Fusion. The contact stated that while driving at various speeds, the vehicle lost power steering functionality, and the steering became stiff and was difficult to turn. The Electronic Power Steering (EPS) warning light was illuminated. The vehicle was taken to an independent mechanic, where the vehicle was diagnosed, and the contact was informed that the power steering was faulty and needed to be replaced. The contact stated that the failure had occurred three times. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 100,000.
Other or unspecified, Apr 4, 2025
Unknown
Service brakes, Hydraulic, Mar 25, 2025
The contact owns a 2010 Ford Fusion. The contact stated that while her daughter was driving at an undisclosed speed, the brake pedal was depressed and went to the floorboard. The vehicle was taken to an independent mechanic, who replaced the ABS hydraulic control unit. The contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was 106,699.
Service brakes, Mar 25, 2025
While merging onto the interstate the brakes abruptly failed. They didn't respond at all then responded weakly with several attempts. The mechanic said the abs failed.
Steering, Mar 23, 2025
Power steering assist failure. Happening while not in motion.
Power train, Mar 4, 2025
Car parking selector, cable, parking prowler/bearing or module sensor inside transmission when car is placed in park indicator indicate as in park but vehicle still motions forward as not in park and if key can be taking out an car shut off will not start because not in the park position an is tough trying to get back in park to start the vehicle but indicator indicates as car in the park position has happened 3-4 times once almost causing a accident in a shopping enter whiling trying to park in parking space an vehicle indicated as in the park position an turn off vehicle it continued to roll forward almost hitting the vehicle in front parking space
Steering, Feb 15, 2025
Lost all Electric Power Steering.This need to be addressed ASP
Service brakes, Feb 15, 2025
Brake pedal suddenly got "soft" - pedal has to be pressed further before braking begins and requires more pressure for the same amount of braking prior to the issue. Mechanic replaced brake pads and rotors and master cylinder. This did not correct the problem. Rear brake pads/rotors are wearing abnormally fast. Symptoms are consistent with malfunction of the hydraulic control unit for which there is a recall from Ford Motor Company. Although this vehicle model year (2010) is included in the recall period, my VIN number is not included. There are numerous anecdotal stories on search results for this problem where many Ford Fusion owners have the same problem and also are not included in the recall.
Steering, Feb 7, 2025
The contact owns a 2010 Ford Fusion. The contact stated that upon starting the vehicle, the "Power Steering Assist Fault" message was displayed on the instrument panel. The contact stated that excessive force was needed to steer the vehicle. The vehicle was not taken to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was unknown.
Service brakes, Hydraulic, Feb 3, 2025
The contact's friend owns a 2010 Ford Fusion. The contact stated that while his friend was driving 30 MPH and attempting to slow down, the brake pedal was depressed and went to the floorboard, and the vehicle failed to stop as intended. The driver was able to bring the vehicle to a complete stop by engaging the parking brake. The ABS warning light was illuminated. The vehicle was towed to the dealer, who diagnosed a failure with the hydraulic control unit. The vehicle was repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brake, Hydraulic); but the VIN was not included. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 182,500.
Steering, Jan 31, 2025
The contact owns a 2010 Ford Fusion. The contact stated that while the vehicle was parked and started, the message “Power Steering Assist Fault” was displayed. The contact stated that the steering wheel was locked. The vehicle was restarted, and the failure was self-corrected. The vehicle was taken to an independent mechanic where it was diagnosed that the power steering control module needed to be replaced or reprogrammed. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 160,000.
Steering, Wheels, Jan 26, 2025
My steering wheel keeps locking up after I had the air bag recall taken care of
Steering, Jan 13, 2025
The contact owns a 2010 Ford Fusion. The contact stated that while driving 25 MPH, the "Power Steering Fault" message was displayed, and the vehicle lost power steering functionality. The vehicle was not taken to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
Service brakes, Hydraulic, Jan 7, 2025
The contact owns a 2010 Ford Fusion. The contact received notification of NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while depressing the brake pedal, the brake pedal went to the floorboard causing the braking distance to be extended. There were no warning lights illuminated. The failure was intermittent. The vehicle was taken to the dealer, and it was determined that the brake module had failed and needed to be replaced. The dealer informed that the contact there were no trouble codes retrieved, and the repair was not covered under the recall. The vehicle had not been repaired. The manufacturer was made aware of the failure and opened a case for possible assistance with the cost of the repair. The failure mileage was 65,000. Parts distribution disconnect.
Steering, Dec 31, 2024
The contact owns a 2010 Ford Fusion. The contact stated that while operating the vehicle, the messages "Tract Off" and "Service Power Steering" were displayed, and the steering wheel became very difficult to turn in either direction. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in NHTSA Campaign Number: 15V340000 (STEERING). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 160,000.
Steering, Electrical system, Structure, Dec 29, 2024
Advanced power steering light came on and my steering wheel was hard to turn. The body underneath came apart, and the transmission recall is being handled by my attorney.
Service brakes, Dec 27, 2024
The contact owns a 2010 Ford Fusion. The contact stated that while operating the vehicle and depressing the brake pedal, the pedal felt soft and extended to the floorboard. The brake pedal was pressed multiple times to stop the vehicle. The contact indicated that the failure was intermittent. The local dealer was notified of the failure and informed that the VIN was not included in the NHTSA Campaign Number: 19V904000(SERVICE BRAKES, HYDRAULIC). The contact indicated that the vehicle had experienced that same failure listed in the recall. The manufacturer was not yet contacted. The failure mileage was 175,000.
Service brakes, Dec 16, 2024
abs brake system service and advance tract system fault codes/ sign shown on the dash. i was driving 40 mph at the brake peddle had no fed back or pressure and the peddle went to the floor i had to use low gear and E-brake to stop. the vehicle is currently in the auto shop waiting to be worked on.
Steering, Dec 16, 2024
The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the steering wheel seized. There was no warning light illuminated. The contact stated that the steering wheel became difficult to control. The vehicle was towed to an independent mechanic where it was diagnosed that the electronic power steering module had failed and needed to be replaced. The vehicle was not yet repaired. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was made aware of the issue and referred the contact to the NHSTA Hotline for assistance. The approximate failure mileage was 120,000.
Service brakes, Hydraulic, Dec 9, 2024
The contact's son owns a 2010 Ford Fusion. The contact stated that while driving at undisclosed speeds, the brake pedal was depressed and went to the floorboard. The contact stated that the brakes became inoperable. Additionally, the tire pressure warning light was illuminated. The brakes were replaced by the contact’s brother, who is an independent mechanic and had determined that there was air trapped in the brake lines and the brake lines needed bleeding. The local dealer was contacted and confirmed that the VIN was not included in NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic). The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no additional assistance was provided. The failure mileage was approximately 140,000.
Steering, Dec 6, 2024
The power steering stop working some lights came on when i was driving, i had Service Advancetrack and service powe steering on my screen then i wasn’t able to turn the wheels they became really hard.
Service brakes, Dec 5, 2024
On [XXX] my car exhibited a problem where the brake pedal was mushy and had to be pushed half way down to stop the vehicle. It felt very unsafe as it happened suddenly and stayed like that. Since I felt unsafe, I took it to my nearest mechanic local shop. He told me that it can be a Master Cylinder issue first and then the HCL. I looked online and found an old recall on Ford fusions 2006-2010 model with recall number 19S54 (DOT Brake Fluid and Anti-Lock Brake System Function). I checked my VIN and there was no recall for my vehicle. It was strange since my vehicle build day was very close to the date mentioned on the recall. On 12/4/2024 at 7:45 AM PST (10:45 EST), I called Ford Dealer (Colley Ford Service) and described the issue and told them about the recall. They did some research and told me my vehicle is NOT covered. On 12/4/2024 at 8:00 and 8:30 AM PST (11:30 EST), I called the customer relations at Ford. They provided the same response and told me that no recall is on my vehicle based on my VIN. That was a bit frustrating given that my vehicle was showing very similar issue and as safety concern. I also discussed this recall with my mechanic. I told my mechanic to go ahead with the repairs he believes is appropriate for my car to ensure my safety. My mechanic inspected it and told me that its either a Master Cylinder problem or the Hydraulic Brake Control Unit (HCU) or both. He first changed the Master Cylinder and flushed Brakes with DOT 4 Ford recommended. That did not fix the issue. Next, he changed the HCU and that fixed the problem. To me, this indicates that with high probability, my vehicle exhibited same problem as what it was shown within the recall notice. I need this to be investigated and I need Ford to be accountable for this issue and pay for my repair expenses as my car has a very close build date and is from the same plant and is a Fusion. I have uploaded a picture of the bill I paid the recall sample. Thank you, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)