2017 Ford Fusion
Problems, recalls and owner-reported issues
Engine is the leading concern among 1,110 owner complaints filed for this model year. This is the 8th highest complaint count among 15 Fusion model years with reports.
Of the 2017 reports, 37 involved a crash and 8 involved a fire. 30 people were injured.
What owners report most often
Recalls and investigations
Service brakes, hydraulic, foundation components, hoses, lines/piping, and fittingsMar 10, 2023
Ford Motor Company (Ford) is recalling certain 2013-2018 Fusion and Lincoln MKZ vehicles. The front brake hoses may rupture and leak brake fluid.
A brake fluid leak will increase brake pedal travel and extend the distance needed to stop the vehicle, increasing the risk of a crash.
Dealers will replace the front brake hoses, free of charge. Owner notification letters were mailed June 27, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S12.
Campaign 23V162000 on NHTSA.gov
Steering, steering wheel/handle barMar 12, 2018
Ford Motor Company (Ford) is recalling certain 2014-2018 Lincoln MKZ and Ford Fusion vehicles. The steering wheel retaining bolt may loosen allowing the steering wheel to detach while driving.
A steering wheel detachment can cause a loss of steering control, increasing the risk of a crash.
Ford will notify owners, and dealers will replace the steering wheel bolt with a longer bolt, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S08.
Campaign 18V167000 on NHTSA.gov
Power train, automatic transmission, torque converterJul 6, 2017
Ford Motor Company (Ford) is recalling certain 2017 Lincoln MKZ and Ford Edge and Fusion vehicles. On vehicles with 2.0L gas engines and six-speed automatic transmissions, the torque converter weld studs may have been inadequately welded.
If the torque converter weld studs fail, the torque converter will not be connected to the engine flexplate and the vehicle will lose the ability to move, increasing the risk of a crash.
Ford or Lincoln will notify owners, and dealers will replace the torque converters, free of charge. The recall began August 25, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S16.
Campaign 17V427000 on NHTSA.gov
Seats, mid/rear assemblyDec 5, 2016
Ford Motor Company (Ford) is recalling certain 2017 Ford Fusion vehicles manufactured September 27, 2016, to September 28, 2016. The left rear seat backs pivot pins may have been improperly welded.
During a crash, the improper welds may fail, allowing any stowed luggage to move into the passenger compartment, increasing the risk of injury.
Ford will notify owners, and dealers will replace the left hand, second row seat back frame, free of charge. The recall began January 10, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S43.
Campaign 16V874000 on NHTSA.gov
Representative owner complaints
1,110 reports, newest first.
Engine and engine cooling, Engine, Jan 22, 2024
The contact owns a 2017 Ford Fusion. The contact stated that while starting the vehicle, there was blue smoke coming from the exhaust pipe. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed that there was coolant intrusion into the engine and determined that the short block needed to be replaced. The vehicle was then taken to the dealer to be repaired under NHTSA Campaign Number: 23V162000 (Service Brakes, Hydraulic) however, the dealer declined to perform Customer Satisfaction Program: 21N12 (Short Block Replacement After Coolant Intrusion). The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The manufacturer informed the contact that Customer Satisfaction Program: 21N12 (Short Block Replacement After Coolant Intrusion) associated with the VIN had expired. The failure mileage was approximately 130,000.
Engine and engine cooling, Equipment, Jan 19, 2024
The contact owns a 2017 Ford Fusion. The contact stated that while the vehicle was idling at a red light, the vehicle lost motive power and shut off. After several minutes the vehicle restarted, and the contact was able to continue driving. The contact stated that coolant was leaking underneath the front end of the vehicle, and there was white smoke coming from the exhaust during the initial startup. The coolant level was low. The check engine warning light was illuminated. The contact believed that the failure was related to NHTSA ID Number: 10210392 (Engine and Engine Cooling, Equipment). The vehicle was taken to an auto body shop to be diagnosed. The contact was informed of a misfire in cylinder #2. The contact's father had changed the spark plugs. The vehicle was then taken to the dealer and the contact was informed that the air intake was missing from the vehicle. The contact was informed that the air intake needed to be replaced. The vehicle had not been repaired. The manufacturer was made aware of the failure, and it was confirmed that VIN was included in the NHTSA ID Number: 10210392 (Engine and Engine Cooling, Equipment) however, it was no longer covered due to exceeding the mileage indicated in the TSB. The contact was referred to the NHTSA Hotline. The failure mileage was 86,683.
Engine and engine cooling, Jan 17, 2024
The contact owns a 2017 Ford Fusion. The contact stated while driving at an undisclosed speed, the contact observed white smoke coming from the exhaust, after which the vehicle inadvertently lost motive power. The contact was able to coast to the shoulder of the roadway, where the vehicle was able to be restarted. No warning lights were illuminated. The vehicle was taken to the dealer, who determined that coolant intrusion in cylinder #2 had damaged the engine, and the engine needed to be replaced. The vehicle was repaired, but the failure reoccurred. The vehicle was taken back to the dealer, who again determined that coolant intrusion in cylinder #2 had damaged the engine however, the vehicle was not repaired. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 60,000.
Engine, Jan 16, 2024
My 2017 Ford Fusion has a coolant issue. Per TSB 19-2139. Ford has a known issue in the cylinder walls and had a program available until November 2022. Sadly this program ended and they still have issues. It has been verified at a third party mechanic and Ford doesn't want to assist in this issue.
Service brakes, Jan 15, 2024
L/S Brake Hose Rear Replacement needed. Brake fluid leak rear caliper and brake hose and line rear flexible hose is split and leaking. Only Front brake hose was recalled when all brake all lines need to be replaced.
Engine, Jan 12, 2024
Hesitation, lack of power, jerking on acceleration. If felt like an ignition misfire and the engine codes suggested multiple misfires. A power balance test was performed and verified there is a misfire on cylinder 2. The spark plug from 2 was swapped with cylinder 1 and the misfire was in cylinder 1. The spark plugs were replaced November, 2023. The plugs look contaminated-seems to be with engine coolant due to a head gasket failure. The coolant reservoir was empty indicating a coolant leak. They then introduced air into cylinder 2 and the coolant rose inside the coolant reservoir. The gasket is failing between the cylinder and one or more of the water passages beside the cylinder. Ford has since updated their engine design to correct this concern so they knew of the issues. There is a current recall on the 1.5L engine however, not the 2.0L. There are multiple class action suits against Ford for this issue. A new engine is needed. This is a 2017 with 85K miles. A new engine should definitely not be required. When researching this issue, there are multiple safety concerns including engine fire. I spoke to Ford's customer service and they were no help whatsoever.
Engine, Engine and engine cooling, Jan 10, 2024
The contact owns a 2017 Ford Fusion. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated on the instrument panel. The vehicle was taken to the dealer, who diagnosed a failure with the spark plugs. The vehicle was repaired, but the failure reoccurred. The vehicle was taken back to the dealer, and it was determined that there was a misfire in cylinder #3 due to low compression. The vehicle was not repaired. After investigating the failure, the contact related the failure to Technical Service Bulletin: 19-2243. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 112,000.
Engine and engine cooling, Jan 10, 2024
The contact owns a 2017 Ford Fusion. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to an independent mechanic and diagnosed with catalytic converter failure. The vehicle was repaired, but the failure reoccurred. The vehicle was taken to the dealer, who determined that coolant intrusion had damaged the engine, and the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure but did not assist. The failure mileage was 113,000.
Engine, Engine and engine cooling, Jan 9, 2024
On [XXX], I entered onto [XXX] from Sparks, Nevada eastbound when a check engine light and oil overheat warning came on. I limped the car to the nearest exit [(XXX)]. I had my grandson with me and he was scared. I checked my coolant level and realized that it was dry. I put coolant to the max line of the reserve tank and drove 25 miles to Carson City. When I took it into the dealership at Capital Ford on December 26, 2023, their service manager said this year had a poor design of the engine (2.0L) which led to coolant intrusion into the cylinders. Two days later, they confirmed. My complaint is the FORD manufacturer knew of this issue and had posted several TSBs, but has only issued a recall the 1.5 L engine. I'm now told that since my car is 1600 miles out of warranty, too bad. I believe the FORD manufacturer should replace my engine for free, knowing it failed as a direct result of their poor engineering design. I purchased the car in July 2020 with 26,350 miles and bought the extended warranty. I was never made aware of the existing issues with the coolant leaking into the valves. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Engine and engine cooling, Jan 8, 2024
The contact owns a 2017 Ford Fusion. The contact stated that while driving at various speeds, the vehicle lost motive power and stalled. The contact waited for a while and then made several attempts to restart the vehicle. The check engine warning light was illuminated. The failure occurred frequently and had become more persistent over time. The vehicle was taken to the dealer to be diagnosed and the contact was informed that the engine had failed due to the intake manifold gasket fracturing the seal, which caused antifreeze to leak into the engine. The vehicle was repaired. The manufacturer was made aware of the failure, and it was confirmed that the VIN was not included in a recall. The manufacturer opened a case and offered to pay a portion of the repair cost. The approximate failure mileage was 45,000.
Power train, Engine, Dec 26, 2023
2017 Ford Fusion 2.0L ecoboost engine is available for inspection. The engine block was designed incorrectly and coolant leaks into the cylinder. There is a risk of fire from the intrusion of coolant in the cylinder. Many other people are having this issue and they did recall the 1.5L engine. They need to on the 2.0L as well. My local mechanic identified the issue and I called the Ford dealer who didn't even need to see it said I need a new engine based off the mechanic's testing. After losing coolant and constantly refilling with no coolant being seen coming from the vehicle, the check engine light comes on. The code listed states that one of the cylinders is misfiring. This is due to coolant in the cylinder. With the risk of fire, Ford needs to put a recall on this issue for the 2.0L ecoboost.
Engine, Dec 18, 2023
Check engine has been off and on for last 500 miles. Regular maintenance. Took to dealership, Codes found of P0303, P0300, and p2196. Found coolant was low and confirmed coolant intrusion into engine. Per dealership either bad head, head gasket, or block and ford recommended replacing engine. Quoted $9000 in repairs to replace engine. Declined repair due to cost. According to NHTSA this is a common issue and should be addressed. Unsafe to drive however repair costs, and now inability to trade in, force driving until no longer can
Power train, Dec 18, 2023
The contact owns a 2017 Ford Fusion. The contact stated while accelerating from a complete stop, the vehicle shuddered and hesitated to respond. There was no warning light illuminated. The contact stated that the failure reoccurred while driving 60 MPH. The contact stated that the failure had been recurring while driving. The vehicle was taken to the dealer several times. The dealer diagnosed the vehicle, but the cause of the failure could not be determined. The contact stated that the failure persisted. The vehicle was taken back to the dealer, where it was diagnosed that the torque converter had failed and needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 17V427000 (Power Train); however, the VIN was not included. The manufacturer was notified of the failure and a case was opened. The manufacturer referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 106,000.
Steering, Dec 16, 2023
I was driving my car one day and the power steering fault message popped up on my dash of my car. So I turned around and went home. I turned the car off and then turn the car back on. Then the power steering fault message showed up with other warning messages. So I tried turning the steering wheel and noticed there was no power steering at all. So the next day I had it towed to the Ford dealer to have them look at it and fix the issue. They ended up replacing the rack and pinion and the power steering motor. When I picked the car up I asked the service person if it was a common part that broke on the car and he said it was a common part that broke. I was surprised that they had that specific part in stock when they told me the problem. Also I was not happy that I had to $4,400.00 to fix it. In my mind if it is a common part that breaks then why hasn't been a recall on that part.
Power train, Dec 13, 2023
******* DELETE VOQ ******* THIS COMPLAINT IS BEING MARKED FOR DELETION BECAUSE IT IS REQUESTED BY THE CONSUMER THAT THEY WISH TO HAVE IT REMOVED. DJR ******* DELETE VOQ *******
Engine and engine cooling, Dec 8, 2023
The contact owns a 2017 Ford Fusion. The contact stated that while his wife was driving at an undisclosed speed, the temperature gauge began to indicate that the vehicle was overheating, prompting the contact to pull over to the shoulder of the roadway. After a visual inspection of the engine compartment, the contact observed that the coolant reservoir was abnormally low and refilled the reservoir. Within three days of refilling the coolant reservoir, the failure reoccurred, after which the vehicle failed to start. The vehicle was towed to an independent mechanic, who was unable to determine the cause of the failure and advised the contact to take the vehicle to the dealer. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. After investigating the failure, the contact related the failure to Technical Service Bulletin: 20-2100. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 74,000.
Power train, Engine, Dec 6, 2023
The contact owns a 2017 Ford Fusion. The contact stated while driving 75 MPH, the vehicle stalled without warning. The contact pulled over to the highway shoulder and the vehicle was initially towed to an independent mechanic. The contact was informed by the mechanic that the engine needed to be taken apart to determine the cause of the failure. The vehicle was then towed to a dealer where the contact was informed that the torque converter and the transmission needed to be repaired. The vehicle was towed for a third time to another independent mechanic where the contact was informed that the flex plate had fractured in five separate places and needed to be repaired also. The manufacturer was not made aware of the issue. The vehicle was not repaired. The failure mileage was approximately 107,510.
Engine, Dec 5, 2023
The contact owns a 2017 Ford Fusion. The contact stated while starting the vehicle, the check engine warning light illuminated. Additionally, there was white smoke coming from the exhaust pipe. Upon inspection, the contact noticed there was a coolant intrusion into the engine. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 67,000.
Engine and engine cooling, Dec 4, 2023
The contact owns a 2017 Ford Fusion. The contact stated while driving at an undisclosed speed, the temperature gauge indicated that the vehicle was overheating, and the contact heard an abnormal sound coming from the engine compartment. The check engine warning light was illuminated. The vehicle was towed to the dealer, and it was determined that the engine block had cracked due to coolant intrusion. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure but did not assist. The failure mileage was 131,000.
Power train, Dec 4, 2023
I was pulling onto the beltway and my car would not shift when I accelerated. Then the engine revved up when I accelerated and the car had no power. It remained in the same gear. Then it wouldn’t move at all. I was able to coast off the highway. Turned the car off and started again. It did the same thing. Staying in the gear and then not accelerating. I find it interesting that other 2017 ford fusion had a previous recall for this. My vin isn’t included on the list
Engine and engine cooling, Dec 4, 2023
The contact owns a 2017 Ford Fusion. The contact stated that while operating the vehicle, the check engine warning light remained illuminated, and the vehicle eventually stalled. The vehicle was towed to an independent mechanic who diagnosed that coolant was present inside the engine. The contact was informed that the engine needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure, but no assistance was provided. The failure mileage was approximately 70,000.
Engine and engine cooling, Dec 1, 2023
The contact owns a 2017 Ford Fusion. The contact stated that after starting the vehicle, the check engine warning light illuminated on the instrument panel. The vehicle was taken to the dealer, who diagnosed a misfire in cylinder #2 caused by coolant intrusion into the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure but did not assist. The failure mileage was 63,000.
Engine, Nov 29, 2023
1.5 ecoboost catastrophic engine failure. On hi-way lost power. Coolant went into engine cracked block. Known defect, but ford says my car is not covered. But won’t explain why, it checks all the boxes, mfg in Mexico during defective years under mileage and date. Never received notice. Stuck with $7,800 repair. Ford executives will not engage to help.
Wheels, Nov 24, 2023
The contact owns a 2017 Ford Fusion. The vehicle was taken to the local dealer to be repaired under NHTSA Campaign Number: 23V162000 (Service Brakes, Hydraulic) however, the contact was informed by the mechanic that the lug nuts were defective. The lug nuts were replaced. The manufacturer was contacted but no assistance was provided. The failure mileage was approximately 54,042.
Engine, Nov 22, 2023
The contact owns a 2017 Ford Fusion. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed with coolant intrusion into the cylinder, and that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but informed the contact that the vehicle was not covered under warranty. The failure mileage was approximately 62,000.