2010 Ford Fusion

Problems, recalls and owner-reported issues

Steering is the leading concern among 5,128 owner complaints filed for this model year. This is the highest complaint count among 15 Fusion model years with reports.

Complaints by model year
  1. 5,128

Of the 2010 reports, 122 involved a crash and 9 involved a fire. 74 people were injured and 1 person died.

Primary concernSteering1,660 reports · 32% of complaints
Owner complaints5,128Filed with NHTSA
Recall relationship13 safety recallsNHTSA campaign records

What owners report most often

  1. Steering1,660
  2. Power train894
  3. Vehicle speed control793
  4. Engine700
  5. Air bags590
  6. Service brakes551
  7. Fuel/propulsion system484
  8. Electrical system324

Recalls and investigations

  1. Air bags, frontal, driver side, inflator moduleMar 10, 2021

    Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

    An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

    Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.

    Campaign 21V158000 on NHTSA.gov

  2. Air bags, frontalFeb 16, 2021

    Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

    In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

    Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.

    Campaign 21V081000 on NHTSA.gov

  3. Air bags, frontal, passenger side, inflator moduleFeb 16, 2021

    Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500. It also includes certain passenger-side air bag inflators and/or modules designed to fit 2005-2014 Ford Mustang, 2010-2012 Lincoln MKZ, 2010-2012 Ford Fusion, 2010-2011 Mercury Milan, 2007-2011 Ford Ranger, and 2007-2010 Lincoln MKX vehicles. Please see Ford's recall report for the specific part numbers. These parts may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

    In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

    Ford will notify dealers that purchased the affected parts, and dealers will provide replacement parts to purchasers, free of charge. The recall began March 18, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.

    Campaign 21E013000 on NHTSA.gov

  4. Service brakes, hydraulic, antilock/traction control/electronic limited slip, control unit/moduleDec 18, 2019

    Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

    If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.

    Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.

    Campaign 19V904000 on NHTSA.gov

  5. Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 7, 2019

    Ford Motor Company (Ford) is recalling certain 2014 Ford Mustang vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2011 Ford Ranger and Mercury Milan vehicles, 2011-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles and 2011-2014 Ford Mustang vehicles sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2010 Ford Edge and Lincoln MKX vehicles, 2010-2011 Ford Ranger and Mercury Milan vehicles, 2010-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles, and 2010-2014 Ford Mustang vehicles sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

    An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

    Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 13, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall 19S01.

    Campaign 19V001000 on NHTSA.gov

  6. Air bags, frontal, passenger side, inflator moduleNov 1, 2018

    Ford Motor Company (Ford) is recalling certain 2010 Ford Fusion, Mercury Milan and 2010-2012 Lincoln MKZ vehicles that previously received a replacement passenger air bag under recall 16V-384, 17V-024 or 18V-046. In the event of a crash requiring deployment of the passenger air bag, the bracket that secures the air bag inflator to the module housing may deform, allowing the gas that inflates the air bag to leak out.

    If the air bag does not inflate as intended, there is an increased risk of injury in the event of a crash.

    Ford will notify owners, and dealers will replace the passenger air bag module, free of charge. The recall began November 21, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S34.

    Campaign 18V775000 on NHTSA.gov

  7. Air bags, frontal, passenger side, inflator moduleDo not drive until repairedJan 11, 2018

    Ford Motor Company (Ford) is recalling certain 2013 Ford Mustang vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2010 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2009 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

    An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

    Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.

    Campaign 18V046000 on NHTSA.gov

  8. Air bags, frontal, passenger side, inflator moduleDo not drive until repairedMay 31, 2016

    Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain model year 2007-2008 Ford Ranger, Edge and Lincoln MKX vehicles, 2006-2008 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2005-2006 Ford GT vehicles and 2005-2008 Ford Mustang vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in the safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

    An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

    Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.

    Campaign 16V384000 on NHTSA.gov

  9. Fuel system, gasoline, storage, auxillary tankNov 24, 2015

    Ford Motor Company (Ford) is recalling certain model year 2010-2011 Ford Fusion vehicles manufactured July 21, 2008, to March 4, 2011, and 2010-2011 Mercury Milan vehicles manufactured July 23, 2008, to December 10, 2010. The affected vehicles have fuel vapor canisters whose purge valves may not operate properly resulting in abnormal pressure changes in the fuel tank.

    The pressure changes may cause the tank to crack and leak fuel. A fuel leak in the presence of an ignition source increases the risk of a fire.

    Ford will notify owners, and dealers will update the vehicle powertrain control modules and inspect the vehicle for any diagnostic trouble codes (DTCs) for this issue and perform a leak test on the Canister Purge Valve (CPV). The fuel tank will be inspected for cracks. The CPV and fuel tank will be replaced as necessary. These repairs will be performed free of charge. The recall began on January 15, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S34.

    Campaign 15V793000 on NHTSA.gov

  10. EquipmentMay 29, 2014

    Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.

    The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.

    Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.

    Campaign 14E028000 on NHTSA.gov

  11. Wheels, lugs/nuts/bolts/studsDec 7, 2011

    FORD IS RECALLING CERTAIN MODEL YEAR 2010-2011 FORD FUSION AND MERCURY MILAN VEHICLES EQUIPPED WITH 17 INCH STEEL WHEELS AND BUILT FROM APRIL 1, 2009, THROUGH APRIL 30, 2009, AND FROM DECEMBER 1, 2009, THROUGH NOVEMBER 13, 2010. THE WHEEL STUDS MAY FRACTURE, POTENTIALLY CAUSING A WHEEL TO SEPARATE.

    WHILE DRIVING, MULTIPLE STUD FRACTURES COULD OCCUR AT THE WHEEL LOCATION, AND THE OPERATOR MAY EXPERIENCE VEHICLE VIBRATION AND/OR WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.

    FORD WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE REAR BRAKE DISC SURFACE FOR FLATNESS AND REPLACE THE DISCS AS NECESSARY. ADDITIONALLY, THE WHEEL LUG NUTS WILL BE REPLACED ON ALL FOUR WHEELS. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JANUARY 24, 2012. OWNERS MAY CONTACT THE FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.

    Campaign 11V574000 on NHTSA.gov

  12. Power train, automatic transmissionMay 24, 2010

    FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, MILAN, AND ESCAPE VEHICLES MANUFACTURED FROM FEBRUARY 27, THROUGH MARCH 26, 2010. THE PARK ROD GUIDE RETENTION PIN MAY NOT HAVE BEEN PROPERLY INSTALLED WHICH FAILS TO CONFORM TO THE REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEFT PROTECTION AND ROLLAWAY PREVENTION".

    A VEHICLE PARKED WITHOUT AN ENGAGED PARK PAWL AND WITHOUT AN APPLIED PARKING BRAKE MAY HAVE UNINTENDED MOVEMENT WHICH MAY CAUSE A CRASH.

    FORD WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 28, 2010. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332 AND FOR THE HEARING IMPAIRED CALL 1-800-232-5952 (TDD). REPRESENTATIVES ARE AVAILABLE MONDAY THROUGH FRIDAY: 8:00AM - 5:00PM.

    Campaign 10V222000 on NHTSA.gov

  13. Seats, front assembly, reclinerApr 20, 2010

    FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, EXPLORER, EXPLORER SPORT TRAC, AND MERCURY MILAN AND MOUNTAINEER VEHICLES MANUFACTURED BETWEEN DECEMBER 15, 2009 THROUGH FEBRUARY 3, 2010 EQUIPPED WITH FRONT SEAT MANUAL RECLINERS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 202, "HEAD RESTRAINT." THE RECLINER GEAR PLATE TEETH MAY BE OUT OF DIMENSION SPECIFICATION WHICH COULD RESULT IN LIMITED PAWL TO GEAR PLATE TOOTH ENGAGEMENT.

    IN THE EVENT OF A CRASH, THE SEATBACK AND HEAD RESTRAINT MAY MOVE REARWARD, INCREASING THE RISK OF INJURY.

    DEALERS WILL REPLACE THE MANUAL RECLINERS FOR BOTH POWER AND MANUAL SEATS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE APRIL 30, 2010. OWNERS MAY CONTACT FORD AT 1-866-436-7332.

    Campaign 10V161000 on NHTSA.gov

Representative owner complaints

5,128 reports, newest first.

  1. Steering, Air bags, Mar 9, 2022

    The contact owns a 2010 Ford Fusion. The contact received notification of NHTSA Campaign Number: 21V158000 (Air Bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. Additionally, the contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of power steering assist. The vehicle was taken to an independent mechanic who diagnosed that the steering column needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 128,000. VIN tool confirms parts not available.

  2. Air bags, Mar 9, 2022

    Takata Recall. The contact owns a 2010 Ford Fusion. The contact received a notification of NHTSA Campaign Number: 21V158000 (Air Bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was not contacted. The vehicle was not repaired. The manufacturer was notified of the issue. The contact had not experienced a failure. The VIN was invalid.

  3. Steering, Mar 9, 2022

    A warning sound beeped multiple times while driving and a dash message appeared, “Power Steering Assist Fault”, and the steering wheel was stiff. There was a recall on the 2011 and newer, but 2010 has the same parts and everything so why wasn't this recall put on 2010 Ford Fusion. This needs to be readdressed and there should be a recall put out for the 2010 considering its a serious safety issue, and lots more people could be killed or injured to this faulty part on the car.

  4. Steering, Mar 2, 2022

    Upon starting my car after getting off work, a warning sound beeped multiple times and a dash message appeared, “Power Steering Assist Fault”, and the steering wheel was stiff. When I began to pull out of my spot and try driving, an additional message with two accompanying warning lamps (exclamation point and swerving car icon) appeared, “Service Advancetrac”. I managed to drive home, albeit very difficult to control and maneuver safely. I brought it to my normal repair shop, who told me that the power steering module needs reprogrammed, and they can’t fix it but that I’ll need to take it to a Ford dealer to have this resolved. I visited this page to see if there had been any recalls for this issue, and clearly this is a major common occurrence, with an open investigation — hoping this will be approved as an official recall soon.

  5. Service brakes, Feb 28, 2022

    Brake pedal go's soft and down to the floor after ant-lock brakes are activated. Dealer may have unstuck a valve when bleeding the brakes which temporarily fixed the issue until anti-brakes were activated again and the brakes were soft again.

  6. Fuel/propulsion system, Feb 21, 2022

    I believe it is the Fuel System Throttle Body. Yes it is available for inspection. While driving on the freeway at 60 mph, and on city streets 30 mph, the car suddenly stalled out. The wrench warning light came on for about 3-5 seconds, but the car was already stalling out. This was a extreme danger to myself and all other drivers in my vicinity. I plan to have the vehicle inspected. No other inspection has been done. Wrench Warning Light came on about 3-5 seconds before car stalled out power seemed to decrease as I pressed the pedal.

  7. Electrical system, Feb 18, 2022

    My vehicle was on and I was in motion heading to work when the wheel stopped turning and my car started saying “power steering assist fault”

  8. Service brakes, Feb 17, 2022

    When I went to deploy the brakes, they would not activate until I pushed the pedal hard and all the way to the floor. The dashboard lights then lit up indicating an ABS issue. The braking distance went from normal to 4-6 times further as a result. I almost hit the truck in front of me. This happens intermittently and without any notice. I called the local Ford dealership and asked about the situation. They said there was no recall on 2010 Ford Fusions for braking issues. So, they will not cover expenses related to any repairs. I researched recalls and found that the braking system in 2010 Ford Fusion is supposed to be covered under a recall. I also have not received any recall notice related to braking on my 2010 Ford Fusion, as part of the recall. The Ford internal reference number for this recall is 19S54. The NHTSA identifier is 19V904.

  9. Air bags, Feb 16, 2022

    Recall 21V-158 for the driver’s side front airbag has yet to have a remedy or even an update for any of the drivers of affected vehicle including myself. Would at least like some insight as to why there’s no way to get this solved yet

  10. Service brakes, Hydraulic, Feb 11, 2022

    The contact owns a 2010 Ford Fusion. The contact stated that while driving 30 MPH, the brake pedal was depressed and went to the floorboard. There was no warning light illuminated. The contact slowed the vehicle by manually changing gears. The contact was able to safely drive the vehicle to the residence. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the ABS valve had failed and needed to be replaced. The vehicle was not repaired. The contact referenced NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic). The manufacturer was made aware of the failure. The approximate failure mileage was 130,000.

  11. Steering, Feb 4, 2022

    Your system won't allow me to make any remarks it's going black and I can't see whats been written

  12. Service brakes, Hydraulic, Feb 1, 2022

    The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brakes did not engage immediately, and the contact had to apply force to the brake pedal to stop the vehicle. The vehicle was taken to an independent mechanic however, the mechanic could not duplicate the failure. The dealer was made aware of the failure and informed the contact that he had to pay out of pocket for diagnostic testing. The manufacturer was not made aware of the failure. The contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the VIN was not included in the recall. The failure mileage was approximately 175,000.

  13. Service brakes, Hydraulic, Jan 31, 2022

    The contact owns a 2010 Ford Fusion. The contact received notification of NHTSA campaign number 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while driving and depressing the brake pedal, the vehicle did not immediately stop causing the braking distance to be extended. VIN tool confirms parts are not available. The approximate failure mileage was 81,000.

  14. Service brakes, Hydraulic, Jan 27, 2022

    The contact's wife owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal went to the floorboard and the brakes failed to engage immediately. The vehicle was towed to the dealer and diagnosed with a stuck valve. The contact was informed that the hydraulic control unit (HCU) needed to be replaced. The vehicle was not repaired and remained at the dealer. The manufacturer was made aware of the failure but denied the repair coverage due to the VIN not being included in any recalls. The contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the VIN was not included. The failure mileage was approximately 139,000.

  15. Service brakes, Hydraulic, Jan 27, 2022

    The contact owns a 2010 Ford Fusion. The contact stated that while driving at various speeds, the brake pedal would depress the floorboard without warning. The contact stated that he replaced the brake master cylinder and bled the braking system with a bypass valve; however, the failure persisted. Upon investigation, the contact discovered NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) which he linked to the failure. The dealer and the manufacturer were contacted and informed the contact that the VIN was not included in the recall. The manufacturer provided a case number and referred him to NHTSA for assistance. The vehicle was not repaired. The failure mileage was approximately 100,000.

  16. Service brakes, Jan 26, 2022

    Brake system failure.

  17. Steering, Jan 25, 2022

    Driving on a highway the warning came on the dash that the power steering assist failed and the power steering was out. Luckily the road was fairly straight and was able to to keep control of the car. Once off the highway and in town needing to steer home, that's when it was a real pain to drive.

  18. Steering, Jan 24, 2022

    The contact owns a 2010 Ford Fusion. The contact stated while driving 35 MPH, an unknown warning light illuminated and then the steering wheel became difficult to turn. The contact stated he was able to park on the side of the road. The contact was able to drive to his residence. The contact took another vehicle to the local dealer and made them aware of the failure. The contact was informed that the rack and pinion needed to be replaced. The vehicle was not diagnosed or repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 160,000.

  19. Other or unspecified, Jan 17, 2022

    Electric power steering fault. Power steering is hard to turn. 2011 and 2012 have recalled approved for the same thing but why not for a 2010??

  20. Service brakes, Jan 4, 2022

    I recently took in my car for the soft pedal recall. I never had any of the issues that were affecting some however now, I am getting problems similar to the soft pedal. When stopping it feels like the brake goes in quite a few inches before actually engaging to slow the speed. This is become very dangerous with the recent snow, it's almost impossible to predict the correct pressure to slow down my speed without sliding. There are no warning lights or any indicators prior to the failure.

  21. Service brakes, Hydraulic, Dec 29, 2021

    The contact owns a 2010 Ford Fusion. The contact’s son stated while driving approximately 45 MPH and depressing the brake pedal, the wheels shuddered, and the brake pedal went to the floor. The contact stated there was no warning light illuminated. The vehicle was taken to a local dealer where it was diagnosed with needing the Hydraulic Electronic Control Unit (HECU) replaced however, the vehicle was not repaired. The manufacturer was informed of the failure and informed the contact that the VIN was not included in a recall. The failure mileage was approximately 220,000.

  22. Steering, Dec 27, 2021

    I was leaving work and my electric power steering went out and flashed a error code, and I was on a busy highway and could got in a serious accident. This was a recall on the 2011 and newer, but 2010 has the same parts and everything so why wasn't this recall put on 2010 Ford Fusion. This needs to be addressed cause I do not have $2200 laying around to fix this problem and its my only car so now I have no way to get to work. This needs to be readdressed and there should be a recall put out for the 2010 considering its a serious safety issue, and lots more people could be killed to this faulty part on the car.

  23. Steering, Dec 27, 2021

    Loss of electric power steering assist during turning. Steering assist non-functional now.

  24. Steering, Dec 24, 2021

    Approximately a year ago, the electric steering assist went out. I researched and found that there have been MANY complaints on this model and other model years for the exact same issue. While other years have been recalled, the 2010 has not and I paid $1600 for the repair. After only a year, the same issue has occurred again. Research again shows there is still an open investigation into this issue, but still no recall after 4 years. When will this issue be resolved with respect to the investigation and Ford be held to account for the repairs?

  25. Service brakes, Dec 23, 2021

    On Dec 6 this vehicle suddenly lost all braking power , even when the brake pedal was pushed to the floorboard, This happened immediately after the car was driven onto rough payment when exiting a service station after gasoline purchase. The driver was able to bring the vehicle to a stop at curbside without collision or injury. The pavement was dry (no rain) on the day of this incident,. The car was towed to our local ford dealer,. The service technician performed a brake inspection as specified in the repair manual and could not reproduce the problem. The mechanic did not inspect the antilock hydraulic control unit even though we requested such inspection at time of service, This incident is simlar to the hydraulic brake unit failure as described in NTSB recall campaign 19VY904000/ Safety Recall 19WS54. Eiigibility for this recall ended with cars that were manufactured through7/15/2019. Our vehicle was manufactured at THE SAME Hermnosillo, Mex with load date Q8/14;/2009, just missing the recall window by a few weeks. REQUESTED ACTION: EXTEND CLOSING DATE FOR RECALL WINDOW SO OUR DEFECTIVE BRAKES CAN BE REPAIRED ATB NO COST.